mirror of
https://github.com/qmk/qmk_firmware.git
synced 2026-06-21 06:44:27 -04:00
Compare commits
9 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 Jack Humbert
|
9e64d5f6c2 | ||
 kuchosauronad0
|
f183af14ad | ||
 Andrew Kannan
|
455a0c5978 | ||
|
kuchosauronad0
|
674fcc474c | ||
 MechMerlin
|
b1c2bf071b | ||
 Angelo Gazzola
|
e258b10d71 | ||
 fauxpark
|
b47c10bf6f | ||
 Danny
|
3817ff7cc0 | ||
 Steve Purcell
|
606813b72d |
@@ -95,13 +95,6 @@ Even worse, it is not recognized unless the keyboard's VID and PID match that of
|
||||
|
||||
See [this issue](https://github.com/qmk/qmk_firmware/issues/2179) for detailed information.
|
||||
|
||||
|
||||
## Media Control Keys in Mac OSX
|
||||
#### KC_MNXT and KC_MPRV Does Not Work on Mac
|
||||
Use `KC_MFFD`(`KC_MEDIA_FAST_FORWARD`) and `KC_MRWD`(`KC_MEDIA_REWIND`) instead of `KC_MNXT` and `KC_MPRV`.
|
||||
See https://github.com/tmk/tmk_keyboard/issues/195
|
||||
|
||||
|
||||
## Keys Supported in Mac OSX?
|
||||
You can know which keycodes are supported in OSX from this source code.
|
||||
|
||||
|
||||
@@ -58,3 +58,11 @@ or `keymap.c`:
|
||||
## Hardware
|
||||
|
||||
The A an B lines of the encoders should be wired directly to the MCU, and the C/common lines should be wired to ground.
|
||||
|
||||
## Encoder matrix
|
||||
|
||||
You can also wire the C/common line through a diode (arrow towards the row) to each of the rows (or reading pin) in your matrix, and use as many encoders as you have rows (multiplied by the number of A/B lines you have hooked up). To do this, you can add this line to your `config.h` with all of the pins you use:
|
||||
|
||||
```c
|
||||
#define ENCODERS_PAD_C { encoder1c, encoder2c }
|
||||
```
|
||||
+2
-2
@@ -185,8 +185,8 @@ This is a reference only. Each group of keys links to the page documenting their
|
||||
|`KC_AUDIO_MUTE` |`KC_MUTE` |Mute |
|
||||
|`KC_AUDIO_VOL_UP` |`KC_VOLU` |Volume Up |
|
||||
|`KC_AUDIO_VOL_DOWN` |`KC_VOLD` |Volume Down |
|
||||
|`KC_MEDIA_NEXT_TRACK` |`KC_MNXT` |Next Track (Windows) |
|
||||
|`KC_MEDIA_PREV_TRACK` |`KC_MPRV` |Previous Track (Windows) |
|
||||
|`KC_MEDIA_NEXT_TRACK` |`KC_MNXT` |Next Track |
|
||||
|`KC_MEDIA_PREV_TRACK` |`KC_MPRV` |Previous Track |
|
||||
|`KC_MEDIA_STOP` |`KC_MSTP` |Stop Track (Windows) |
|
||||
|`KC_MEDIA_PLAY_PAUSE` |`KC_MPLY` |Play/Pause Track |
|
||||
|`KC_MEDIA_SELECT` |`KC_MSEL` |Launch Media Player (Windows) |
|
||||
|
||||
@@ -191,7 +191,7 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07
|
||||
|
||||
These keycodes are not part of the Keyboard/Keypad usage page. The `SYSTEM_` keycodes are found in the Generic Desktop page, and the rest are located in the Consumer page.
|
||||
|
||||
Windows and macOS use different keycodes for "next track" and "previous track". Make sure you choose the keycode that corresponds to your OS.
|
||||
?> Some of these keycodes may behave differently depending on the OS. For example, on macOS, the keycodes `KC_MEDIA_FAST_FORWARD`, `KC_MEDIA_REWIND`, `KC_MEDIA_NEXT_TRACK` and `KC_MEDIA_PREV_TRACK` skip within the current track when held, but skip the entire track when tapped.
|
||||
|
||||
|Key |Aliases |Description |
|
||||
|-----------------------|---------|-----------------------------|
|
||||
@@ -201,8 +201,8 @@ Windows and macOS use different keycodes for "next track" and "previous track".
|
||||
|`KC_AUDIO_MUTE` |`KC_MUTE`|Mute |
|
||||
|`KC_AUDIO_VOL_UP` |`KC_VOLU`|Volume Up |
|
||||
|`KC_AUDIO_VOL_DOWN` |`KC_VOLD`|Volume Down |
|
||||
|`KC_MEDIA_NEXT_TRACK` |`KC_MNXT`|Next Track (Windows) |
|
||||
|`KC_MEDIA_PREV_TRACK` |`KC_MPRV`|Previous Track (Windows) |
|
||||
|`KC_MEDIA_NEXT_TRACK` |`KC_MNXT`|Next Track |
|
||||
|`KC_MEDIA_PREV_TRACK` |`KC_MPRV`|Previous Track |
|
||||
|`KC_MEDIA_STOP` |`KC_MSTP`|Stop Track (Windows) |
|
||||
|`KC_MEDIA_PLAY_PAUSE` |`KC_MPLY`|Play/Pause Track |
|
||||
|`KC_MEDIA_SELECT` |`KC_MSEL`|Launch Media Player (Windows)|
|
||||
|
||||
@@ -28,16 +28,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT)) \
|
||||
)
|
||||
|
||||
//#ifdef RGBLIGHT_ENABLE
|
||||
//#define RGB_DI_PIN D3
|
||||
//#define RGBLED_NUM 16 // Number of LEDs
|
||||
//#define RGBLED_SPLIT { 8, 8 }
|
||||
//
|
||||
//#define RGBLIGHT_HUE_STEP 12
|
||||
//#define RGBLIGHT_SAT_STEP 12
|
||||
//#define RGBLIGHT_VAL_STEP 12
|
||||
//#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
|
||||
//#define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
|
||||
//#define RGBLIGHT_EFFECT_BREATHE_CENTER 1
|
||||
//#endif // RGBLIGHT_ENABLE
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
# define RGB_DI_PIN D0
|
||||
# define RGBLED_NUM 4
|
||||
#endif // !RGBLIGHT_ENABLE
|
||||
|
||||
/*
|
||||
#ifdef AUDIO_ENABLE
|
||||
# Timer 1: #define B5_AUDIO #define B6_AUDIO #define B7_AUDIO
|
||||
# Timer 3: #define C4_AUDIO #define C5_AUDIO #define C6_AUDIO
|
||||
//TODO: only D0 and D1 available
|
||||
#endif // !AUDIO_ENABLE
|
||||
*/
|
||||
|
||||
|
||||
@@ -22,14 +22,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "kuchosauronad0.h"
|
||||
|
||||
#ifdef INDICATOR_LIGHTS
|
||||
extern userspace_config_t userspace_config;
|
||||
|
||||
uint8_t last_mod;
|
||||
uint8_t last_led;
|
||||
uint8_t last_osm;
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
extern rgblight_config_t rgblight_config;
|
||||
#endif
|
||||
|
||||
#ifdef INDICATOR_LIGHTS
|
||||
extern userspace_config_t userspace_config;
|
||||
uint8_t last_mod;
|
||||
uint8_t last_led;
|
||||
uint8_t last_osm;
|
||||
#endif
|
||||
|
||||
|
||||
#define LAYOUT_collide39_base( \
|
||||
K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
|
||||
K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
|
||||
@@ -40,7 +44,16 @@ uint8_t last_osm;
|
||||
SFT_T(KC_ESC), K11, K12, K13, K14, K15, LT(LOWER,KC_PGDN), K16, K17, K18, K19, K1A, SFT_T(KC_ENT), \
|
||||
MT(MOD_LCTL,KC_DEL), K21, K22, K23, K24, K25, KC_SPACE, K26, K27, K28, K29, K2A, KC_LEAD \
|
||||
)
|
||||
#define LAYOUT_collide39_base_wrapper(...) LAYOUT_collide39_base(__VA_ARGS__)
|
||||
|
||||
/*
|
||||
* ,------. ,----------------------------------------------------------------------------. ,------.
|
||||
* |ALTTAB| | Q | W | E | R | T |RSE/PU| Y | U | I | O | P | | BSPC |
|
||||
* |------| |------+------+------+------+------+------+------+------+------+------+------+ |------|
|
||||
* |SF/ESC| | A | S | D | F | G |LWR/PD| H | J | K | L | ; | | ENTER|
|
||||
* |------| |------+------+------+------+------+------+------+------+------+------+------+ |------|
|
||||
* |CTLDEL| | Z | X | C | V | B |SPACE | N | M | , | . | / | |LEADER|
|
||||
* `------' `----------------------------------------------------------------------------' `------'
|
||||
*/
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
@@ -70,39 +83,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
),
|
||||
#endif
|
||||
[_WORKMAN] = LAYOUT_collide39_base_wrapper(
|
||||
_________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
|
||||
_________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
|
||||
_________________WORKMAN_L3________________, _________________WORKMAN_R3________________
|
||||
_________________RGB_UP____________________, _________________RGB_UP____________________,
|
||||
_________________RGB_CENTER________________, _________________RGB_CENTER________________,
|
||||
_________________RGB_DOWN__________________, _________________RGB_DOWN__________________
|
||||
),
|
||||
|
||||
[_NORMAN] = LAYOUT_collide39_base_wrapper(
|
||||
_________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
|
||||
_________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
|
||||
_________________NORMAN_L3_________________, _________________NORMAN_R3_________________
|
||||
[_PLOVER] = LAYOUT_wrapper(\
|
||||
KC_1, _________________PLOVER_L1_________________, _______, _________________PLOVER_R1_________________, KC_1,
|
||||
KC_NO, _________________PLOVER_L2_________________, _______, _________________PLOVER_R2_________________, KC_NO,
|
||||
KC_NO, _________________PLOVER_L3_________________, _______, _________________PLOVER_R3_________________, _______
|
||||
),
|
||||
|
||||
[_MALTRON] = LAYOUT_collide39_base_wrapper(
|
||||
_________________MALTRON_L1________________, _________________MALTRON_R1________________,
|
||||
_________________MALTRON_L2________________, _________________MALTRON_R2________________,
|
||||
_________________MALTRON_L3________________, _________________MALTRON_R3________________
|
||||
),
|
||||
|
||||
[_EUCALYN] = LAYOUT_collide39_base_wrapper(
|
||||
_________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
|
||||
_________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
|
||||
_________________EUCALYN_L3________________, _________________EUCALYN_R3________________
|
||||
),
|
||||
|
||||
[_CARPLAX] = LAYOUT_collide39_base_wrapper(
|
||||
_____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
|
||||
_____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
|
||||
_____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
|
||||
),
|
||||
|
||||
|
||||
[_MODS] = LAYOUT_wrapper(\
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
KC_LALT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RALT,
|
||||
KC_LCTL, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RCTL,
|
||||
KC_LSFT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
@@ -121,7 +115,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_ADJUST] = LAYOUT_wrapper(\
|
||||
KC_MAKE, _________________ADJUST_L1_________________, _______, _________________ADJUST_R1_________________, KC_RESET,
|
||||
VRSN, _________________ADJUST_L2_________________, _______, _________________ADJUST_R2_________________, EEP_RST,
|
||||
TG_MODS, _________________ADJUST_L3_________________, _______, _________________ADJUST_R3_________________, KC_MPLY
|
||||
DEBUG, _________________ADJUST_L3_________________, _______, _________________ADJUST_R3_________________, _______
|
||||
)
|
||||
|
||||
};
|
||||
|
||||
@@ -1 +1,10 @@
|
||||
# Personal keymap for the collide39
|
||||
|
||||
## Features:
|
||||
|
||||
- leader key
|
||||
- combos
|
||||
- tap dance
|
||||
- rgb backlight for the space key using a chameleon 4x WS28xx leds
|
||||
|
||||
#
|
||||
|
||||
@@ -2,19 +2,19 @@ BOOTLOADER = caterina
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
LEADER_ENABLE = yes # default is yes
|
||||
TAP_DANCE_ENABLE = no #(+1254)
|
||||
COMBO_ENABLE = yes
|
||||
UNICODE_ENABLE = no #(+1134)
|
||||
UNICODEMAP_ENABLE = yes
|
||||
RGBLIGHT_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
AUDIO_ENABLE = no
|
||||
NKRO_ENABLE = yes
|
||||
|
||||
INDICATOR_LIGHTS = no
|
||||
INDICATOR_LIGHTS = yes
|
||||
MACROS_ENABLED = no
|
||||
RGBLIGHT_TWINKLE = no
|
||||
RGBLIGHT_STARTUP_ANIMATION = no
|
||||
RGBLIGHT_STARTUP_ANIMATION = yes
|
||||
|
||||
NO_SECRETS = yes
|
||||
NO_SECRETS = no
|
||||
|
||||
@@ -62,21 +62,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
// EEPROM usage
|
||||
// TODO: refactor with new user EEPROM code (coming soon)
|
||||
#define EEPROM_MAGIC 0x451F
|
||||
#define EEPROM_MAGIC_ADDR 32
|
||||
#define EEPROM_MAGIC_ADDR 40
|
||||
// Bump this every time we change what we store
|
||||
// This will automatically reset the EEPROM with defaults
|
||||
// and avoid loading invalid data from the EEPROM
|
||||
#define EEPROM_VERSION 0x02
|
||||
#define EEPROM_VERSION_ADDR 34
|
||||
#define EEPROM_VERSION 0x03
|
||||
#define EEPROM_VERSION_ADDR 42
|
||||
|
||||
|
||||
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
|
||||
// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
|
||||
// start + layer * rows * col * 2
|
||||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
|
||||
#define EEPROM_CUSTOM_BACKLIGHT 636
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200
|
||||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
|
||||
#define EEPROM_CUSTOM_BACKLIGHT 644
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 645
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
|
||||
#define DYNAMIC_KEYMAP_MACRO_COUNT 16
|
||||
|
||||
/*
|
||||
|
||||
@@ -62,21 +62,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
// EEPROM usage
|
||||
// TODO: refactor with new user EEPROM code (coming soon)
|
||||
#define EEPROM_MAGIC 0x451F
|
||||
#define EEPROM_MAGIC_ADDR 32
|
||||
#define EEPROM_MAGIC_ADDR 40
|
||||
// Bump this every time we change what we store
|
||||
// This will automatically reset the EEPROM with defaults
|
||||
// and avoid loading invalid data from the EEPROM
|
||||
#define EEPROM_VERSION 0x02
|
||||
#define EEPROM_VERSION_ADDR 34
|
||||
#define EEPROM_VERSION 0x03
|
||||
#define EEPROM_VERSION_ADDR 42
|
||||
|
||||
|
||||
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
|
||||
// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
|
||||
// start + layer * rows * col * 2
|
||||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
|
||||
#define EEPROM_CUSTOM_BACKLIGHT 636
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 637
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200
|
||||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
|
||||
#define EEPROM_CUSTOM_BACKLIGHT 644
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 645
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
|
||||
#define DYNAMIC_KEYMAP_MACRO_COUNT 16
|
||||
|
||||
/*
|
||||
|
||||
@@ -0,0 +1,109 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
const PALConfig pal_default_config = {
|
||||
#if STM32_HAS_GPIOA
|
||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
|
||||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
|
||||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
|
||||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
|
||||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
|
||||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
|
||||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
|
||||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
|
||||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
|
||||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
void enter_bootloader_mode_if_requested(void);
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details This initialization must be performed just after stack setup
|
||||
* and before any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
enter_bootloader_mode_if_requested();
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief MMC_SPI card detection.
|
||||
*/
|
||||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief MMC_SPI card write protection detection.
|
||||
*/
|
||||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
}
|
||||
@@ -0,0 +1,922 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H
|
||||
#define BOARD_H
|
||||
|
||||
/*
|
||||
* Setup for ST STM32F072B-Discovery board.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_ST_STM32F072B_DISCOVERY
|
||||
#define BOARD_NAME "ST STM32F072B-Discovery"
|
||||
|
||||
/*
|
||||
* Board oscillators-related settings.
|
||||
* NOTE: HSE not fitted.
|
||||
*/
|
||||
#if !defined(STM32_LSECLK)
|
||||
#define STM32_LSECLK 32768
|
||||
#endif
|
||||
|
||||
#define STM32_LSEDRV (3U << 3U)
|
||||
|
||||
#if !defined(STM32_HSECLK)
|
||||
#define STM32_HSECLK 0U
|
||||
#endif
|
||||
|
||||
#define STM32_HSE_BYPASS
|
||||
|
||||
/*
|
||||
* MCU type as defined in the ST header.
|
||||
*/
|
||||
#define STM32F072xB
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_BUTTON 0U
|
||||
#define GPIOA_PIN1 1U
|
||||
#define GPIOA_PIN2 2U
|
||||
#define GPIOA_PIN3 3U
|
||||
#define GPIOA_PIN4 4U
|
||||
#define GPIOA_PIN5 5U
|
||||
#define GPIOA_PIN6 6U
|
||||
#define GPIOA_PIN7 7U
|
||||
#define GPIOA_PIN8 8U
|
||||
#define GPIOA_PIN9 9U
|
||||
#define GPIOA_PIN10 10U
|
||||
#define GPIOA_USB_DM 11U
|
||||
#define GPIOA_USB_DP 12U
|
||||
#define GPIOA_SWDIO 13U
|
||||
#define GPIOA_SWCLK 14U
|
||||
#define GPIOA_PIN15 15U
|
||||
|
||||
#define GPIOB_PIN0 0U
|
||||
#define GPIOB_PIN1 1U
|
||||
#define GPIOB_PIN2 2U
|
||||
#define GPIOB_PIN3 3U
|
||||
#define GPIOB_PIN4 4U
|
||||
#define GPIOB_PIN5 5U
|
||||
#define GPIOB_PIN6 6U
|
||||
#define GPIOB_PIN7 7U
|
||||
#define GPIOB_PIN8 8U
|
||||
#define GPIOB_PIN9 9U
|
||||
#define GPIOB_PIN10 10U
|
||||
#define GPIOB_PIN11 11U
|
||||
#define GPIOB_PIN12 12U
|
||||
#define GPIOB_SPI2_SCK 13U
|
||||
#define GPIOB_SPI2_MISO 14U
|
||||
#define GPIOB_SPI2_MOSI 15U
|
||||
|
||||
#define GPIOC_MEMS_CS 0U
|
||||
#define GPIOC_PIN1 1U
|
||||
#define GPIOC_PIN2 2U
|
||||
#define GPIOC_PIN3 3U
|
||||
#define GPIOC_PIN4 4U
|
||||
#define GPIOC_PIN5 5U
|
||||
#define GPIOC_LED_RED 6U
|
||||
#define GPIOC_LED_BLUE 7U
|
||||
#define GPIOC_LED_ORANGE 8U
|
||||
#define GPIOC_LED_GREEN 9U
|
||||
#define GPIOC_PIN10 10U
|
||||
#define GPIOC_PIN11 11U
|
||||
#define GPIOC_PIN12 12U
|
||||
#define GPIOC_PIN13 13U
|
||||
#define GPIOC_OSC32_IN 14U
|
||||
#define GPIOC_OSC32_OUT 15U
|
||||
|
||||
#define GPIOD_PIN0 0U
|
||||
#define GPIOD_PIN1 1U
|
||||
#define GPIOD_PIN2 2U
|
||||
#define GPIOD_PIN3 3U
|
||||
#define GPIOD_PIN4 4U
|
||||
#define GPIOD_PIN5 5U
|
||||
#define GPIOD_PIN6 6U
|
||||
#define GPIOD_PIN7 7U
|
||||
#define GPIOD_PIN8 8U
|
||||
#define GPIOD_PIN9 9U
|
||||
#define GPIOD_PIN10 10U
|
||||
#define GPIOD_PIN11 11U
|
||||
#define GPIOD_PIN12 12U
|
||||
#define GPIOD_PIN13 13U
|
||||
#define GPIOD_PIN14 14U
|
||||
#define GPIOD_PIN15 15U
|
||||
|
||||
#define GPIOE_PIN0 0U
|
||||
#define GPIOE_PIN1 1U
|
||||
#define GPIOE_PIN2 2U
|
||||
#define GPIOE_PIN3 3U
|
||||
#define GPIOE_PIN4 4U
|
||||
#define GPIOE_PIN5 5U
|
||||
#define GPIOE_PIN6 6U
|
||||
#define GPIOE_PIN7 7U
|
||||
#define GPIOE_PIN8 8U
|
||||
#define GPIOE_PIN9 9U
|
||||
#define GPIOE_PIN10 10U
|
||||
#define GPIOE_PIN11 11U
|
||||
#define GPIOE_PIN12 12U
|
||||
#define GPIOE_PIN13 13U
|
||||
#define GPIOE_PIN14 14U
|
||||
#define GPIOE_PIN15 15U
|
||||
|
||||
#define GPIOF_OSC_IN 0U
|
||||
#define GPIOF_OSC_OUT 1U
|
||||
#define GPIOF_PIN2 2U
|
||||
#define GPIOF_PIN3 3U
|
||||
#define GPIOF_PIN4 4U
|
||||
#define GPIOF_PIN5 5U
|
||||
#define GPIOF_PIN6 6U
|
||||
#define GPIOF_PIN7 7U
|
||||
#define GPIOF_PIN8 8U
|
||||
#define GPIOF_PIN9 9U
|
||||
#define GPIOF_PIN10 10U
|
||||
#define GPIOF_PIN11 11U
|
||||
#define GPIOF_PIN12 12U
|
||||
#define GPIOF_PIN13 13U
|
||||
#define GPIOF_PIN14 14U
|
||||
#define GPIOF_PIN15 15U
|
||||
|
||||
/*
|
||||
* IO lines assignments.
|
||||
*/
|
||||
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
|
||||
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
|
||||
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
|
||||
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
|
||||
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
|
||||
|
||||
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
|
||||
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
|
||||
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
|
||||
|
||||
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
|
||||
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
|
||||
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
|
||||
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
|
||||
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
|
||||
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
|
||||
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
|
||||
|
||||
|
||||
|
||||
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
|
||||
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
|
||||
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
|
||||
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
|
||||
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
|
||||
#define PIN_ODR_LOW(n) (0U << (n))
|
||||
#define PIN_ODR_HIGH(n) (1U << (n))
|
||||
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
|
||||
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
|
||||
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
|
||||
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
|
||||
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
|
||||
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
|
||||
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
|
||||
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
|
||||
|
||||
/*
|
||||
* GPIOA setup:
|
||||
*
|
||||
* PA0 - BUTTON (input floating).
|
||||
* PA1 - PIN1 (input pullup).
|
||||
* PA2 - PIN2 (input pullup).
|
||||
* PA3 - PIN3 (input pullup).
|
||||
* PA4 - PIN4 (input pullup).
|
||||
* PA5 - PIN5 (input pullup).
|
||||
* PA6 - PIN6 (input pullup).
|
||||
* PA7 - PIN7 (input pullup).
|
||||
* PA8 - PIN8 (input pullup).
|
||||
* PA9 - PIN9 (input pullup).
|
||||
* PA10 - PIN10 (input pullup).
|
||||
* PA11 - USB_DM (input floating).
|
||||
* PA12 - USB_DP (input floating).
|
||||
* PA13 - SWDIO (alternate 0).
|
||||
* PA14 - SWCLK (alternate 0).
|
||||
* PA15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOA_USB_DM) | \
|
||||
PIN_MODE_INPUT(GPIOA_USB_DP) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
|
||||
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
|
||||
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
|
||||
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOA_USB_DM) | \
|
||||
PIN_ODR_HIGH(GPIOA_USB_DP) | \
|
||||
PIN_ODR_HIGH(GPIOA_SWDIO) | \
|
||||
PIN_ODR_HIGH(GPIOA_SWCLK) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN7, 0U))
|
||||
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOB setup:
|
||||
*
|
||||
* PB0 - PIN0 (input pullup).
|
||||
* PB1 - PIN1 (input pullup).
|
||||
* PB2 - PIN2 (input pullup).
|
||||
* PB3 - PIN3 (input pullup).
|
||||
* PB4 - PIN4 (input pullup).
|
||||
* PB5 - PIN5 (input pullup).
|
||||
* PB6 - PIN6 (input pullup).
|
||||
* PB7 - PIN7 (input pullup).
|
||||
* PB8 - PIN8 (input pullup).
|
||||
* PB9 - PIN9 (input pullup).
|
||||
* PB10 - PIN10 (input pullup).
|
||||
* PB11 - PIN11 (input pullup).
|
||||
* PB12 - PIN12 (input pullup).
|
||||
* PB13 - SPI2_SCK (alternate 0).
|
||||
* PB14 - SPI2_MISO (alternate 0).
|
||||
* PB15 - SPI2_MOSI (alternate 0).
|
||||
*/
|
||||
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN12) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN7, 0U))
|
||||
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
|
||||
|
||||
/*
|
||||
* GPIOC setup:
|
||||
*
|
||||
* PC0 - MEMS_CS (output pushpull maximum).
|
||||
* PC1 - PIN1 (input pullup).
|
||||
* PC2 - PIN2 (input pullup).
|
||||
* PC3 - PIN3 (input pullup).
|
||||
* PC4 - PIN4 (input pullup).
|
||||
* PC5 - PIN5 (input pullup).
|
||||
* PC6 - LED_RED (output pushpull maximum).
|
||||
* PC7 - LED_BLUE (output pushpull maximum).
|
||||
* PC8 - LED_ORANGE (output pushpull maximum).
|
||||
* PC9 - LED_GREEN (output pushpull maximum).
|
||||
* PC10 - PIN10 (input pullup).
|
||||
* PC11 - PIN11 (input pullup).
|
||||
* PC12 - PIN12 (input pullup).
|
||||
* PC13 - PIN13 (input pullup).
|
||||
* PC14 - OSC32_IN (input floating).
|
||||
* PC15 - OSC32_OUT (input floating).
|
||||
*/
|
||||
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN5) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
|
||||
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN5) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_RED) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
|
||||
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
|
||||
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
|
||||
|
||||
/*
|
||||
* GPIOD setup:
|
||||
*
|
||||
* PD0 - PIN0 (input pullup).
|
||||
* PD1 - PIN1 (input pullup).
|
||||
* PD2 - PIN2 (input pullup).
|
||||
* PD3 - PIN3 (input pullup).
|
||||
* PD4 - PIN4 (input pullup).
|
||||
* PD5 - PIN5 (input pullup).
|
||||
* PD6 - PIN6 (input pullup).
|
||||
* PD7 - PIN7 (input pullup).
|
||||
* PD8 - PIN8 (input pullup).
|
||||
* PD9 - PIN9 (input pullup).
|
||||
* PD10 - PIN10 (input pullup).
|
||||
* PD11 - PIN11 (input pullup).
|
||||
* PD12 - PIN12 (input pullup).
|
||||
* PD13 - PIN13 (input pullup).
|
||||
* PD14 - PIN14 (input pullup).
|
||||
* PD15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN7, 0U))
|
||||
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOE setup:
|
||||
*
|
||||
* PE0 - PIN0 (input pullup).
|
||||
* PE1 - PIN1 (input pullup).
|
||||
* PE2 - PIN2 (input pullup).
|
||||
* PE3 - PIN3 (input pullup).
|
||||
* PE4 - PIN4 (input pullup).
|
||||
* PE5 - PIN5 (input pullup).
|
||||
* PE6 - PIN6 (input pullup).
|
||||
* PE7 - PIN7 (input pullup).
|
||||
* PE8 - PIN8 (input pullup).
|
||||
* PE9 - PIN9 (input pullup).
|
||||
* PE10 - PIN10 (input pullup).
|
||||
* PE11 - PIN11 (input pullup).
|
||||
* PE12 - PIN12 (input pullup).
|
||||
* PE13 - PIN13 (input pullup).
|
||||
* PE14 - PIN14 (input pullup).
|
||||
* PE15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN7, 0U))
|
||||
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOF setup:
|
||||
*
|
||||
* PF0 - OSC_IN (input floating).
|
||||
* PF1 - OSC_OUT (input floating).
|
||||
* PF2 - PIN2 (input pullup).
|
||||
* PF3 - PIN3 (input pullup).
|
||||
* PF4 - PIN4 (input pullup).
|
||||
* PF5 - PIN5 (input pullup).
|
||||
* PF6 - PIN6 (input pullup).
|
||||
* PF7 - PIN7 (input pullup).
|
||||
* PF8 - PIN8 (input pullup).
|
||||
* PF9 - PIN9 (input pullup).
|
||||
* PF10 - PIN10 (input pullup).
|
||||
* PF11 - PIN11 (input pullup).
|
||||
* PF12 - PIN12 (input pullup).
|
||||
* PF13 - PIN13 (input pullup).
|
||||
* PF14 - PIN14 (input pullup).
|
||||
* PF15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
|
||||
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
|
||||
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
|
||||
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN7, 0U))
|
||||
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN15, 0U))
|
||||
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void boardInit(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* BOARD_H */
|
||||
@@ -0,0 +1,5 @@
|
||||
# List of all the board related files.
|
||||
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY
|
||||
@@ -0,0 +1,703 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!-- STM32F0xx board Template -->
|
||||
<board
|
||||
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
|
||||
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
|
||||
<configuration_settings>
|
||||
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
|
||||
<output_path>..</output_path>
|
||||
<hal_version>3.0.x</hal_version>
|
||||
</configuration_settings>
|
||||
<board_name>ST STM32F072B-Discovery</board_name>
|
||||
<board_id>ST_STM32F072B_DISCOVERY</board_id>
|
||||
<board_functions></board_functions>
|
||||
<subtype>STM32F072xB</subtype>
|
||||
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
|
||||
LSEBypass="false" LSEDrive="3 High Drive (default)" />
|
||||
<ports>
|
||||
<GPIOA>
|
||||
<pin0
|
||||
ID="BUTTON"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID="USB_DM"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID="USB_DP"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID="SWDIO"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="SWCLK"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullDown"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOA>
|
||||
<GPIOB>
|
||||
<pin0
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID="SPI2_SCK"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="SPI2_MISO"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID="SPI2_MOSI"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
</GPIOB>
|
||||
<GPIOC>
|
||||
<pin0
|
||||
ID="MEMS_CS"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID="LED_RED"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID="LED_BLUE"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID="LED_ORANGE"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" ></pin8>
|
||||
<pin9
|
||||
ID="LED_GREEN"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="OSC32_IN"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID="OSC32_OUT"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOC>
|
||||
<GPIOD>
|
||||
<pin0
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOD>
|
||||
<GPIOE>
|
||||
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOE>
|
||||
<GPIOF>
|
||||
<pin0
|
||||
ID="OSC_IN"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID="OSC_OUT"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOF>
|
||||
</ports>
|
||||
</board>
|
||||
@@ -0,0 +1,7 @@
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here (page 175):
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
|
||||
@@ -0,0 +1,524 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/chconf.h
|
||||
* @brief Configuration file template.
|
||||
* @details A copy of this file must be placed in each project directory, it
|
||||
* contains the application specific kernel settings.
|
||||
*
|
||||
* @addtogroup config
|
||||
* @details Kernel related settings and hooks.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef CHCONF_H
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name System timers settings
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System time counter resolution.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#define CH_CFG_ST_RESOLUTION 32
|
||||
|
||||
/**
|
||||
* @brief System tick frequency.
|
||||
* @details Frequency of the system timer that drives the system ticks. This
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#define CH_CFG_ST_FREQUENCY 10000
|
||||
|
||||
/**
|
||||
* @brief Time delta constant for the tick-less mode.
|
||||
* @note If this value is zero then the system uses the classic
|
||||
* periodic tick. This value represents the minimum number
|
||||
* of ticks that is safe to specify in a timeout directive.
|
||||
* The value one is not valid, timeouts are rounded up to
|
||||
* this value.
|
||||
*/
|
||||
#define CH_CFG_ST_TIMEDELTA 2
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel parameters and options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Round robin interval.
|
||||
* @details This constant is the number of system ticks allowed for the
|
||||
* threads before preemption occurs. Setting this value to zero
|
||||
* disables the preemption for threads with equal priority and the
|
||||
* round robin becomes cooperative. Note that higher priority
|
||||
* threads can still preempt, the kernel is always preemptive.
|
||||
* @note Disabling the round robin preemption makes the kernel more compact
|
||||
* and generally faster.
|
||||
* @note The round robin preemption is not supported in tickless mode and
|
||||
* must be set to zero in that case.
|
||||
*/
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
* does not spawn the idle thread. The application @p main()
|
||||
* function becomes the idle thread and must implement an
|
||||
* infinite loop.
|
||||
*/
|
||||
#define CH_CFG_NO_IDLE_THREAD FALSE
|
||||
|
||||
/* Use __WFI in the idle thread for waiting. Does lower the power
|
||||
* consumption. */
|
||||
#define CORTEX_ENABLE_WFI_IDLE TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Performance options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief OS optimization.
|
||||
* @details If enabled then time efficient rather than space efficient code
|
||||
* is used when two possible implementations exist.
|
||||
*
|
||||
* @note This is not related to the compiler optimization options.
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_OPTIMIZE_SPEED FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Subsystem options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Time Measurement APIs.
|
||||
* @details If enabled then the time measurement APIs are included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_TM FALSE
|
||||
|
||||
/**
|
||||
* @brief Threads registry APIs.
|
||||
* @details If enabled then the registry APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
|
||||
/**
|
||||
* @brief Threads synchronization APIs.
|
||||
* @details If enabled then the @p chThdWait() function is included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores APIs.
|
||||
* @details If enabled then the Semaphores APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores queuing mode.
|
||||
* @details If enabled then the threads are enqueued on semaphores by
|
||||
* priority rather than in FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mutexes APIs.
|
||||
* @details If enabled then the mutexes APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables recursive behavior on mutexes.
|
||||
* @note Recursive mutexes are heavier and have an increased
|
||||
* memory footprint.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs.
|
||||
* @details If enabled then the conditional variables APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs with timeout.
|
||||
* @details If enabled then the conditional variables APIs with timeout
|
||||
* specification are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_CONDVARS.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs.
|
||||
* @details If enabled then the event flags APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS TRUE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs with timeout.
|
||||
* @details If enabled then the events APIs with timeout specification
|
||||
* are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_EVENTS.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages APIs.
|
||||
* @details If enabled then the synchronous messages APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages queuing mode.
|
||||
* @details If enabled then messages are served by priority rather than in
|
||||
* FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_MESSAGES.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
* included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Core Memory Manager APIs.
|
||||
* @details If enabled then the core memory manager APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMCORE FALSE
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
|
||||
* @p CH_CFG_USE_SEMAPHORES.
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#define CH_CFG_USE_HEAP FALSE
|
||||
|
||||
/**
|
||||
* @brief Memory Pools Allocator APIs.
|
||||
* @details If enabled then the memory pools allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMPOOLS FALSE
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#define CH_CFG_USE_DYNAMIC FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Debug options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Debug option, kernel statistics.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_STATISTICS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, system state check.
|
||||
* @details If enabled the correct call protocol for system APIs is checked
|
||||
* at runtime.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, parameters checks.
|
||||
* @details If enabled then the checks on the API functions input
|
||||
* parameters are activated.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_CHECKS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, consistency checks.
|
||||
* @details If enabled then all the assertions in the kernel code are
|
||||
* activated. This includes consistency checks inside the kernel,
|
||||
* runtime anomalies and port-defined checks.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_ASSERTS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, trace buffer.
|
||||
* @details If enabled then the trace buffer is activated.
|
||||
*
|
||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
|
||||
|
||||
/**
|
||||
* @brief Trace buffer entries.
|
||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
|
||||
* different from @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_BUFFER_SIZE 128
|
||||
|
||||
/**
|
||||
* @brief Debug option, stack checks.
|
||||
* @details If enabled then a runtime stack check is performed.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note The stack check is performed in a architecture/port dependent way.
|
||||
* It may not be implemented or some ports.
|
||||
* @note The default failure mode is to halt the system with the global
|
||||
* @p panic_msg variable set to @p NULL.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_STACK_CHECK FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, stacks initialization.
|
||||
* @details If enabled then the threads working area is filled with a byte
|
||||
* value when a thread is created. This can be useful for the
|
||||
* runtime measurement of the used stack.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_FILL_THREADS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, threads profiling.
|
||||
* @details If enabled then a field is added to the @p thread_t structure that
|
||||
* counts the system ticks occurred while executing the thread.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note This debug option is not currently compatible with the
|
||||
* tickless mode.
|
||||
*/
|
||||
#define CH_DBG_THREADS_PROFILING FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel hooks
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Threads descriptor structure extension.
|
||||
* @details User fields added to the end of the @p thread_t structure.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief Threads initialization hook.
|
||||
* @details User initialization code added to the @p chThdInit() API.
|
||||
*
|
||||
* @note It is invoked from within @p chThdInit() and implicitly from all
|
||||
* the threads creation APIs.
|
||||
*/
|
||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads finalization hook.
|
||||
* @details User finalization code added to the @p chThdExit() API.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
|
||||
/* Add threads finalization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Context switch hook.
|
||||
* @details This hook is invoked just before switching between threads.
|
||||
*/
|
||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
|
||||
/* Context switch code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR enter hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
|
||||
/* IRQ prologue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR exit hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
|
||||
/* IRQ epilogue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread enter hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to activate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_ENTER_HOOK() { \
|
||||
/* Idle-enter code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread leave hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to deactivate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \
|
||||
/* Idle-leave code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle Loop hook.
|
||||
* @details This hook is continuously invoked by the idle thread loop.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LOOP_HOOK() { \
|
||||
/* Idle loop code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System tick event hook.
|
||||
* @details This hook is invoked in the system tick handler immediately
|
||||
* after processing the virtual timers queue.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \
|
||||
/* System tick event code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System halt hook.
|
||||
* @details This hook is invoked in case to a system halting error before
|
||||
* the system is halted.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
|
||||
/* System halt code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Trace hook.
|
||||
* @details This hook is invoked each time a new record is written in the
|
||||
* trace buffer.
|
||||
*/
|
||||
#define CH_CFG_TRACE_HOOK(tep) { \
|
||||
/* Trace code here.*/ \
|
||||
}
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Port-specific settings (override port settings defaulted in chcore.h). */
|
||||
/*===========================================================================*/
|
||||
|
||||
#endif /* CHCONF_H */
|
||||
|
||||
/** @} */
|
||||
@@ -0,0 +1,89 @@
|
||||
/*
|
||||
Copyright 2015 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x5A12
|
||||
#define PRODUCT_ID 0x5165
|
||||
#define DEVICE_VER 0x0001
|
||||
/* in python2: list(u"whatever".encode('utf-16-le')) */
|
||||
/* at most 32 characters or the ugly hack in usb_main.c borks */
|
||||
#define MANUFACTURER SmithAndRune
|
||||
#define PRODUCT Iron165
|
||||
#define DESCRIPTION Iron165 Keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 16
|
||||
|
||||
#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A8, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
|
||||
#define MATRIX_ROW_PINS { B12, B13, B14, B15, A1 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_LEVELS 6
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BREATHING_PERIOD 6
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
// EEPROM usage
|
||||
// TODO: refactor with new user EEPROM code (coming soon)
|
||||
#define EEPROM_MAGIC 0x451F
|
||||
#define EEPROM_MAGIC_ADDR 40
|
||||
// Bump this every time we change what we store
|
||||
// This will automatically reset the EEPROM with defaults
|
||||
// and avoid loading invalid data from the EEPROM
|
||||
#define EEPROM_VERSION 0x02
|
||||
#define EEPROM_VERSION_ADDR 42
|
||||
|
||||
|
||||
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
|
||||
// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
|
||||
// start + layer * rows * col * 2
|
||||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
|
||||
#define EEPROM_CUSTOM_BACKLIGHT 684
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 685
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
|
||||
#define DYNAMIC_KEYMAP_MACRO_COUNT 16
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
@@ -0,0 +1,354 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/halconf.h
|
||||
* @brief HAL configuration header.
|
||||
* @details HAL configuration file, this file allows to enable or disable the
|
||||
* various device drivers from your application. You may also use
|
||||
* this file in order to override the device drivers default settings.
|
||||
*
|
||||
* @addtogroup HAL_CONF
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _HALCONF_H_
|
||||
#define _HALCONF_H_
|
||||
|
||||
#include "mcuconf.h"
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PAL TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ADC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CAN FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_DAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EXT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2C FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2S FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MMC_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RTC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SDC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL_USB FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_UART FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WDG FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* ADC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CAN driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch.
|
||||
*/
|
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
|
||||
#define CAN_USE_SLEEP_MODE TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* I2C driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus.
|
||||
*/
|
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_ZERO_COPY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MMC_SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
* This option is recommended also if the SPI driver does not
|
||||
* use a DMA channel and heavily loads the CPU.
|
||||
*/
|
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define MMC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SDC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card.
|
||||
* @note Attempts are performed at 10mS intervals.
|
||||
*/
|
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_RETRY 100
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards.
|
||||
* @note MMC support is not yet implemented so this option must be kept
|
||||
* at @p FALSE.
|
||||
*/
|
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
|
||||
#define SDC_MMC_SUPPORT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
*/
|
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define SDC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Default bit rate.
|
||||
* @details Configuration parameter, this is the baud rate selected for the
|
||||
* default configuration.
|
||||
*/
|
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_DEFAULT_BITRATE 38400
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial buffers size.
|
||||
* @details Configuration parameter, you can change the depth of the queue
|
||||
* buffers depending on the requirements of your application.
|
||||
* @note The default is 64 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_BUFFERS_SIZE 16
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL_USB driver related setting. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size.
|
||||
* @details Configuration parameter, the buffer size must be a multiple of
|
||||
* the USB data endpoint maximum packet size.
|
||||
* @note The default is 64 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 1
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
|
||||
/*===========================================================================*/
|
||||
/* USB driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define USB_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
#endif /* _HALCONF_H_ */
|
||||
|
||||
/** @} */
|
||||
@@ -0,0 +1,13 @@
|
||||
{
|
||||
"keyboard_name": "Iron165",
|
||||
"url": "https://cannonkeys.com",
|
||||
"maintainer": "awkannan",
|
||||
"width": 16,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_default": {
|
||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
@@ -0,0 +1 @@
|
||||
#include "iron165.h"
|
||||
@@ -0,0 +1,17 @@
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_default( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \
|
||||
K400, K401, K402, K406, K410, K411, K412, K413, K415 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, KC_NO }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \
|
||||
{ K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, KC_NO, K415 } \
|
||||
}
|
||||
@@ -0,0 +1,47 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = LAYOUT_default(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[_FN1] = LAYOUT_default(
|
||||
KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
@@ -0,0 +1,46 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = LAYOUT_default(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[_FN1] = LAYOUT_default(
|
||||
KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
@@ -0,0 +1,5 @@
|
||||
# rules.mk overrides to enable VIA
|
||||
|
||||
RAW_ENABLE = yes
|
||||
DYNAMIC_KEYMAP_ENABLE = yes
|
||||
|
||||
@@ -0,0 +1,176 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 3...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F0xx_MCUCONF
|
||||
// #define STM32F070xB
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_HSI14_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 12
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE STM32_PPRE_DIV1
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_USBSW STM32_USBSW_HSI48
|
||||
#define STM32_CECSW STM32_CECSW_HSI
|
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 3
|
||||
#define STM32_SERIAL_USART2_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 2
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
@@ -0,0 +1,12 @@
|
||||
# Smith+Rune Iron165
|
||||
|
||||
Iron165 Keyboard
|
||||
|
||||
Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
|
||||
Hardware Supported: STM32F072CBT6
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make cannonkeys/iron165:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -0,0 +1,55 @@
|
||||
# project specific files
|
||||
# SRC = ssd1306.c
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F0xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F072xB
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f0xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = ST_STM32F072B_DISCOVERY
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 6
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
# project specific files
|
||||
VPATH += keyboards/cannonkeys/stm32f072
|
||||
SRC = keyboard.c \
|
||||
led.c
|
||||
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p DF11
|
||||
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX = no # Custom matrix file
|
||||
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
|
||||
RGBLIGHT_ENABLE = no
|
||||
@@ -0,0 +1,109 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
const PALConfig pal_default_config = {
|
||||
#if STM32_HAS_GPIOA
|
||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
|
||||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
|
||||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
|
||||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
|
||||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
|
||||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
|
||||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
|
||||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
|
||||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
|
||||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
void enter_bootloader_mode_if_requested(void);
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details This initialization must be performed just after stack setup
|
||||
* and before any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
enter_bootloader_mode_if_requested();
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief MMC_SPI card detection.
|
||||
*/
|
||||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief MMC_SPI card write protection detection.
|
||||
*/
|
||||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
}
|
||||
@@ -0,0 +1,922 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H
|
||||
#define BOARD_H
|
||||
|
||||
/*
|
||||
* Setup for ST STM32F072B-Discovery board.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_ST_STM32F072B_DISCOVERY
|
||||
#define BOARD_NAME "ST STM32F072B-Discovery"
|
||||
|
||||
/*
|
||||
* Board oscillators-related settings.
|
||||
* NOTE: HSE not fitted.
|
||||
*/
|
||||
#if !defined(STM32_LSECLK)
|
||||
#define STM32_LSECLK 32768
|
||||
#endif
|
||||
|
||||
#define STM32_LSEDRV (3U << 3U)
|
||||
|
||||
#if !defined(STM32_HSECLK)
|
||||
#define STM32_HSECLK 0U
|
||||
#endif
|
||||
|
||||
#define STM32_HSE_BYPASS
|
||||
|
||||
/*
|
||||
* MCU type as defined in the ST header.
|
||||
*/
|
||||
#define STM32F072xB
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_BUTTON 0U
|
||||
#define GPIOA_PIN1 1U
|
||||
#define GPIOA_PIN2 2U
|
||||
#define GPIOA_PIN3 3U
|
||||
#define GPIOA_PIN4 4U
|
||||
#define GPIOA_PIN5 5U
|
||||
#define GPIOA_PIN6 6U
|
||||
#define GPIOA_PIN7 7U
|
||||
#define GPIOA_PIN8 8U
|
||||
#define GPIOA_PIN9 9U
|
||||
#define GPIOA_PIN10 10U
|
||||
#define GPIOA_USB_DM 11U
|
||||
#define GPIOA_USB_DP 12U
|
||||
#define GPIOA_SWDIO 13U
|
||||
#define GPIOA_SWCLK 14U
|
||||
#define GPIOA_PIN15 15U
|
||||
|
||||
#define GPIOB_PIN0 0U
|
||||
#define GPIOB_PIN1 1U
|
||||
#define GPIOB_PIN2 2U
|
||||
#define GPIOB_PIN3 3U
|
||||
#define GPIOB_PIN4 4U
|
||||
#define GPIOB_PIN5 5U
|
||||
#define GPIOB_PIN6 6U
|
||||
#define GPIOB_PIN7 7U
|
||||
#define GPIOB_PIN8 8U
|
||||
#define GPIOB_PIN9 9U
|
||||
#define GPIOB_PIN10 10U
|
||||
#define GPIOB_PIN11 11U
|
||||
#define GPIOB_PIN12 12U
|
||||
#define GPIOB_SPI2_SCK 13U
|
||||
#define GPIOB_SPI2_MISO 14U
|
||||
#define GPIOB_SPI2_MOSI 15U
|
||||
|
||||
#define GPIOC_MEMS_CS 0U
|
||||
#define GPIOC_PIN1 1U
|
||||
#define GPIOC_PIN2 2U
|
||||
#define GPIOC_PIN3 3U
|
||||
#define GPIOC_PIN4 4U
|
||||
#define GPIOC_PIN5 5U
|
||||
#define GPIOC_LED_RED 6U
|
||||
#define GPIOC_LED_BLUE 7U
|
||||
#define GPIOC_LED_ORANGE 8U
|
||||
#define GPIOC_LED_GREEN 9U
|
||||
#define GPIOC_PIN10 10U
|
||||
#define GPIOC_PIN11 11U
|
||||
#define GPIOC_PIN12 12U
|
||||
#define GPIOC_PIN13 13U
|
||||
#define GPIOC_OSC32_IN 14U
|
||||
#define GPIOC_OSC32_OUT 15U
|
||||
|
||||
#define GPIOD_PIN0 0U
|
||||
#define GPIOD_PIN1 1U
|
||||
#define GPIOD_PIN2 2U
|
||||
#define GPIOD_PIN3 3U
|
||||
#define GPIOD_PIN4 4U
|
||||
#define GPIOD_PIN5 5U
|
||||
#define GPIOD_PIN6 6U
|
||||
#define GPIOD_PIN7 7U
|
||||
#define GPIOD_PIN8 8U
|
||||
#define GPIOD_PIN9 9U
|
||||
#define GPIOD_PIN10 10U
|
||||
#define GPIOD_PIN11 11U
|
||||
#define GPIOD_PIN12 12U
|
||||
#define GPIOD_PIN13 13U
|
||||
#define GPIOD_PIN14 14U
|
||||
#define GPIOD_PIN15 15U
|
||||
|
||||
#define GPIOE_PIN0 0U
|
||||
#define GPIOE_PIN1 1U
|
||||
#define GPIOE_PIN2 2U
|
||||
#define GPIOE_PIN3 3U
|
||||
#define GPIOE_PIN4 4U
|
||||
#define GPIOE_PIN5 5U
|
||||
#define GPIOE_PIN6 6U
|
||||
#define GPIOE_PIN7 7U
|
||||
#define GPIOE_PIN8 8U
|
||||
#define GPIOE_PIN9 9U
|
||||
#define GPIOE_PIN10 10U
|
||||
#define GPIOE_PIN11 11U
|
||||
#define GPIOE_PIN12 12U
|
||||
#define GPIOE_PIN13 13U
|
||||
#define GPIOE_PIN14 14U
|
||||
#define GPIOE_PIN15 15U
|
||||
|
||||
#define GPIOF_OSC_IN 0U
|
||||
#define GPIOF_OSC_OUT 1U
|
||||
#define GPIOF_PIN2 2U
|
||||
#define GPIOF_PIN3 3U
|
||||
#define GPIOF_PIN4 4U
|
||||
#define GPIOF_PIN5 5U
|
||||
#define GPIOF_PIN6 6U
|
||||
#define GPIOF_PIN7 7U
|
||||
#define GPIOF_PIN8 8U
|
||||
#define GPIOF_PIN9 9U
|
||||
#define GPIOF_PIN10 10U
|
||||
#define GPIOF_PIN11 11U
|
||||
#define GPIOF_PIN12 12U
|
||||
#define GPIOF_PIN13 13U
|
||||
#define GPIOF_PIN14 14U
|
||||
#define GPIOF_PIN15 15U
|
||||
|
||||
/*
|
||||
* IO lines assignments.
|
||||
*/
|
||||
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
|
||||
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
|
||||
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
|
||||
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
|
||||
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
|
||||
|
||||
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
|
||||
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
|
||||
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
|
||||
|
||||
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
|
||||
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
|
||||
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
|
||||
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
|
||||
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
|
||||
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
|
||||
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
|
||||
|
||||
|
||||
|
||||
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
|
||||
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
|
||||
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
|
||||
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
|
||||
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
|
||||
#define PIN_ODR_LOW(n) (0U << (n))
|
||||
#define PIN_ODR_HIGH(n) (1U << (n))
|
||||
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
|
||||
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
|
||||
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
|
||||
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
|
||||
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
|
||||
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
|
||||
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
|
||||
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
|
||||
|
||||
/*
|
||||
* GPIOA setup:
|
||||
*
|
||||
* PA0 - BUTTON (input floating).
|
||||
* PA1 - PIN1 (input pullup).
|
||||
* PA2 - PIN2 (input pullup).
|
||||
* PA3 - PIN3 (input pullup).
|
||||
* PA4 - PIN4 (input pullup).
|
||||
* PA5 - PIN5 (input pullup).
|
||||
* PA6 - PIN6 (input pullup).
|
||||
* PA7 - PIN7 (input pullup).
|
||||
* PA8 - PIN8 (input pullup).
|
||||
* PA9 - PIN9 (input pullup).
|
||||
* PA10 - PIN10 (input pullup).
|
||||
* PA11 - USB_DM (input floating).
|
||||
* PA12 - USB_DP (input floating).
|
||||
* PA13 - SWDIO (alternate 0).
|
||||
* PA14 - SWCLK (alternate 0).
|
||||
* PA15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOA_USB_DM) | \
|
||||
PIN_MODE_INPUT(GPIOA_USB_DP) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
|
||||
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
|
||||
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
|
||||
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOA_USB_DM) | \
|
||||
PIN_ODR_HIGH(GPIOA_USB_DP) | \
|
||||
PIN_ODR_HIGH(GPIOA_SWDIO) | \
|
||||
PIN_ODR_HIGH(GPIOA_SWCLK) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN7, 0U))
|
||||
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOB setup:
|
||||
*
|
||||
* PB0 - PIN0 (input pullup).
|
||||
* PB1 - PIN1 (input pullup).
|
||||
* PB2 - PIN2 (input pullup).
|
||||
* PB3 - PIN3 (input pullup).
|
||||
* PB4 - PIN4 (input pullup).
|
||||
* PB5 - PIN5 (input pullup).
|
||||
* PB6 - PIN6 (input pullup).
|
||||
* PB7 - PIN7 (input pullup).
|
||||
* PB8 - PIN8 (input pullup).
|
||||
* PB9 - PIN9 (input pullup).
|
||||
* PB10 - PIN10 (input pullup).
|
||||
* PB11 - PIN11 (input pullup).
|
||||
* PB12 - PIN12 (input pullup).
|
||||
* PB13 - SPI2_SCK (alternate 0).
|
||||
* PB14 - SPI2_MISO (alternate 0).
|
||||
* PB15 - SPI2_MOSI (alternate 0).
|
||||
*/
|
||||
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN12) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN7, 0U))
|
||||
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
|
||||
|
||||
/*
|
||||
* GPIOC setup:
|
||||
*
|
||||
* PC0 - MEMS_CS (output pushpull maximum).
|
||||
* PC1 - PIN1 (input pullup).
|
||||
* PC2 - PIN2 (input pullup).
|
||||
* PC3 - PIN3 (input pullup).
|
||||
* PC4 - PIN4 (input pullup).
|
||||
* PC5 - PIN5 (input pullup).
|
||||
* PC6 - LED_RED (output pushpull maximum).
|
||||
* PC7 - LED_BLUE (output pushpull maximum).
|
||||
* PC8 - LED_ORANGE (output pushpull maximum).
|
||||
* PC9 - LED_GREEN (output pushpull maximum).
|
||||
* PC10 - PIN10 (input pullup).
|
||||
* PC11 - PIN11 (input pullup).
|
||||
* PC12 - PIN12 (input pullup).
|
||||
* PC13 - PIN13 (input pullup).
|
||||
* PC14 - OSC32_IN (input floating).
|
||||
* PC15 - OSC32_OUT (input floating).
|
||||
*/
|
||||
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN5) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
|
||||
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN5) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_RED) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
|
||||
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
|
||||
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
|
||||
|
||||
/*
|
||||
* GPIOD setup:
|
||||
*
|
||||
* PD0 - PIN0 (input pullup).
|
||||
* PD1 - PIN1 (input pullup).
|
||||
* PD2 - PIN2 (input pullup).
|
||||
* PD3 - PIN3 (input pullup).
|
||||
* PD4 - PIN4 (input pullup).
|
||||
* PD5 - PIN5 (input pullup).
|
||||
* PD6 - PIN6 (input pullup).
|
||||
* PD7 - PIN7 (input pullup).
|
||||
* PD8 - PIN8 (input pullup).
|
||||
* PD9 - PIN9 (input pullup).
|
||||
* PD10 - PIN10 (input pullup).
|
||||
* PD11 - PIN11 (input pullup).
|
||||
* PD12 - PIN12 (input pullup).
|
||||
* PD13 - PIN13 (input pullup).
|
||||
* PD14 - PIN14 (input pullup).
|
||||
* PD15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN7, 0U))
|
||||
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOE setup:
|
||||
*
|
||||
* PE0 - PIN0 (input pullup).
|
||||
* PE1 - PIN1 (input pullup).
|
||||
* PE2 - PIN2 (input pullup).
|
||||
* PE3 - PIN3 (input pullup).
|
||||
* PE4 - PIN4 (input pullup).
|
||||
* PE5 - PIN5 (input pullup).
|
||||
* PE6 - PIN6 (input pullup).
|
||||
* PE7 - PIN7 (input pullup).
|
||||
* PE8 - PIN8 (input pullup).
|
||||
* PE9 - PIN9 (input pullup).
|
||||
* PE10 - PIN10 (input pullup).
|
||||
* PE11 - PIN11 (input pullup).
|
||||
* PE12 - PIN12 (input pullup).
|
||||
* PE13 - PIN13 (input pullup).
|
||||
* PE14 - PIN14 (input pullup).
|
||||
* PE15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN7, 0U))
|
||||
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOF setup:
|
||||
*
|
||||
* PF0 - OSC_IN (input floating).
|
||||
* PF1 - OSC_OUT (input floating).
|
||||
* PF2 - PIN2 (input pullup).
|
||||
* PF3 - PIN3 (input pullup).
|
||||
* PF4 - PIN4 (input pullup).
|
||||
* PF5 - PIN5 (input pullup).
|
||||
* PF6 - PIN6 (input pullup).
|
||||
* PF7 - PIN7 (input pullup).
|
||||
* PF8 - PIN8 (input pullup).
|
||||
* PF9 - PIN9 (input pullup).
|
||||
* PF10 - PIN10 (input pullup).
|
||||
* PF11 - PIN11 (input pullup).
|
||||
* PF12 - PIN12 (input pullup).
|
||||
* PF13 - PIN13 (input pullup).
|
||||
* PF14 - PIN14 (input pullup).
|
||||
* PF15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
|
||||
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
|
||||
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
|
||||
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN7, 0U))
|
||||
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN15, 0U))
|
||||
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void boardInit(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* BOARD_H */
|
||||
@@ -0,0 +1,5 @@
|
||||
# List of all the board related files.
|
||||
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY
|
||||
@@ -0,0 +1,703 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!-- STM32F0xx board Template -->
|
||||
<board
|
||||
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
|
||||
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
|
||||
<configuration_settings>
|
||||
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
|
||||
<output_path>..</output_path>
|
||||
<hal_version>3.0.x</hal_version>
|
||||
</configuration_settings>
|
||||
<board_name>ST STM32F072B-Discovery</board_name>
|
||||
<board_id>ST_STM32F072B_DISCOVERY</board_id>
|
||||
<board_functions></board_functions>
|
||||
<subtype>STM32F072xB</subtype>
|
||||
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
|
||||
LSEBypass="false" LSEDrive="3 High Drive (default)" />
|
||||
<ports>
|
||||
<GPIOA>
|
||||
<pin0
|
||||
ID="BUTTON"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID="USB_DM"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID="USB_DP"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID="SWDIO"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="SWCLK"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullDown"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOA>
|
||||
<GPIOB>
|
||||
<pin0
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID="SPI2_SCK"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="SPI2_MISO"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID="SPI2_MOSI"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
</GPIOB>
|
||||
<GPIOC>
|
||||
<pin0
|
||||
ID="MEMS_CS"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID="LED_RED"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID="LED_BLUE"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID="LED_ORANGE"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" ></pin8>
|
||||
<pin9
|
||||
ID="LED_GREEN"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="OSC32_IN"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID="OSC32_OUT"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOC>
|
||||
<GPIOD>
|
||||
<pin0
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOD>
|
||||
<GPIOE>
|
||||
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOE>
|
||||
<GPIOF>
|
||||
<pin0
|
||||
ID="OSC_IN"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID="OSC_OUT"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOF>
|
||||
</ports>
|
||||
</board>
|
||||
@@ -0,0 +1,7 @@
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here (page 175):
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
|
||||
@@ -0,0 +1,524 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/chconf.h
|
||||
* @brief Configuration file template.
|
||||
* @details A copy of this file must be placed in each project directory, it
|
||||
* contains the application specific kernel settings.
|
||||
*
|
||||
* @addtogroup config
|
||||
* @details Kernel related settings and hooks.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef CHCONF_H
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name System timers settings
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System time counter resolution.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#define CH_CFG_ST_RESOLUTION 32
|
||||
|
||||
/**
|
||||
* @brief System tick frequency.
|
||||
* @details Frequency of the system timer that drives the system ticks. This
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#define CH_CFG_ST_FREQUENCY 10000
|
||||
|
||||
/**
|
||||
* @brief Time delta constant for the tick-less mode.
|
||||
* @note If this value is zero then the system uses the classic
|
||||
* periodic tick. This value represents the minimum number
|
||||
* of ticks that is safe to specify in a timeout directive.
|
||||
* The value one is not valid, timeouts are rounded up to
|
||||
* this value.
|
||||
*/
|
||||
#define CH_CFG_ST_TIMEDELTA 2
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel parameters and options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Round robin interval.
|
||||
* @details This constant is the number of system ticks allowed for the
|
||||
* threads before preemption occurs. Setting this value to zero
|
||||
* disables the preemption for threads with equal priority and the
|
||||
* round robin becomes cooperative. Note that higher priority
|
||||
* threads can still preempt, the kernel is always preemptive.
|
||||
* @note Disabling the round robin preemption makes the kernel more compact
|
||||
* and generally faster.
|
||||
* @note The round robin preemption is not supported in tickless mode and
|
||||
* must be set to zero in that case.
|
||||
*/
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
* does not spawn the idle thread. The application @p main()
|
||||
* function becomes the idle thread and must implement an
|
||||
* infinite loop.
|
||||
*/
|
||||
#define CH_CFG_NO_IDLE_THREAD FALSE
|
||||
|
||||
/* Use __WFI in the idle thread for waiting. Does lower the power
|
||||
* consumption. */
|
||||
#define CORTEX_ENABLE_WFI_IDLE TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Performance options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief OS optimization.
|
||||
* @details If enabled then time efficient rather than space efficient code
|
||||
* is used when two possible implementations exist.
|
||||
*
|
||||
* @note This is not related to the compiler optimization options.
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_OPTIMIZE_SPEED FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Subsystem options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Time Measurement APIs.
|
||||
* @details If enabled then the time measurement APIs are included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_TM FALSE
|
||||
|
||||
/**
|
||||
* @brief Threads registry APIs.
|
||||
* @details If enabled then the registry APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
|
||||
/**
|
||||
* @brief Threads synchronization APIs.
|
||||
* @details If enabled then the @p chThdWait() function is included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores APIs.
|
||||
* @details If enabled then the Semaphores APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores queuing mode.
|
||||
* @details If enabled then the threads are enqueued on semaphores by
|
||||
* priority rather than in FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mutexes APIs.
|
||||
* @details If enabled then the mutexes APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables recursive behavior on mutexes.
|
||||
* @note Recursive mutexes are heavier and have an increased
|
||||
* memory footprint.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs.
|
||||
* @details If enabled then the conditional variables APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs with timeout.
|
||||
* @details If enabled then the conditional variables APIs with timeout
|
||||
* specification are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_CONDVARS.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs.
|
||||
* @details If enabled then the event flags APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS TRUE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs with timeout.
|
||||
* @details If enabled then the events APIs with timeout specification
|
||||
* are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_EVENTS.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages APIs.
|
||||
* @details If enabled then the synchronous messages APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages queuing mode.
|
||||
* @details If enabled then messages are served by priority rather than in
|
||||
* FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_MESSAGES.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
* included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Core Memory Manager APIs.
|
||||
* @details If enabled then the core memory manager APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMCORE FALSE
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
|
||||
* @p CH_CFG_USE_SEMAPHORES.
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#define CH_CFG_USE_HEAP FALSE
|
||||
|
||||
/**
|
||||
* @brief Memory Pools Allocator APIs.
|
||||
* @details If enabled then the memory pools allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMPOOLS FALSE
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#define CH_CFG_USE_DYNAMIC FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Debug options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Debug option, kernel statistics.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_STATISTICS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, system state check.
|
||||
* @details If enabled the correct call protocol for system APIs is checked
|
||||
* at runtime.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, parameters checks.
|
||||
* @details If enabled then the checks on the API functions input
|
||||
* parameters are activated.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_CHECKS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, consistency checks.
|
||||
* @details If enabled then all the assertions in the kernel code are
|
||||
* activated. This includes consistency checks inside the kernel,
|
||||
* runtime anomalies and port-defined checks.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_ASSERTS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, trace buffer.
|
||||
* @details If enabled then the trace buffer is activated.
|
||||
*
|
||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
|
||||
|
||||
/**
|
||||
* @brief Trace buffer entries.
|
||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
|
||||
* different from @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_BUFFER_SIZE 128
|
||||
|
||||
/**
|
||||
* @brief Debug option, stack checks.
|
||||
* @details If enabled then a runtime stack check is performed.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note The stack check is performed in a architecture/port dependent way.
|
||||
* It may not be implemented or some ports.
|
||||
* @note The default failure mode is to halt the system with the global
|
||||
* @p panic_msg variable set to @p NULL.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_STACK_CHECK FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, stacks initialization.
|
||||
* @details If enabled then the threads working area is filled with a byte
|
||||
* value when a thread is created. This can be useful for the
|
||||
* runtime measurement of the used stack.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_FILL_THREADS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, threads profiling.
|
||||
* @details If enabled then a field is added to the @p thread_t structure that
|
||||
* counts the system ticks occurred while executing the thread.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note This debug option is not currently compatible with the
|
||||
* tickless mode.
|
||||
*/
|
||||
#define CH_DBG_THREADS_PROFILING FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel hooks
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Threads descriptor structure extension.
|
||||
* @details User fields added to the end of the @p thread_t structure.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief Threads initialization hook.
|
||||
* @details User initialization code added to the @p chThdInit() API.
|
||||
*
|
||||
* @note It is invoked from within @p chThdInit() and implicitly from all
|
||||
* the threads creation APIs.
|
||||
*/
|
||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads finalization hook.
|
||||
* @details User finalization code added to the @p chThdExit() API.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
|
||||
/* Add threads finalization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Context switch hook.
|
||||
* @details This hook is invoked just before switching between threads.
|
||||
*/
|
||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
|
||||
/* Context switch code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR enter hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
|
||||
/* IRQ prologue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR exit hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
|
||||
/* IRQ epilogue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread enter hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to activate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_ENTER_HOOK() { \
|
||||
/* Idle-enter code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread leave hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to deactivate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \
|
||||
/* Idle-leave code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle Loop hook.
|
||||
* @details This hook is continuously invoked by the idle thread loop.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LOOP_HOOK() { \
|
||||
/* Idle loop code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System tick event hook.
|
||||
* @details This hook is invoked in the system tick handler immediately
|
||||
* after processing the virtual timers queue.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \
|
||||
/* System tick event code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System halt hook.
|
||||
* @details This hook is invoked in case to a system halting error before
|
||||
* the system is halted.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
|
||||
/* System halt code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Trace hook.
|
||||
* @details This hook is invoked each time a new record is written in the
|
||||
* trace buffer.
|
||||
*/
|
||||
#define CH_CFG_TRACE_HOOK(tep) { \
|
||||
/* Trace code here.*/ \
|
||||
}
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Port-specific settings (override port settings defaulted in chcore.h). */
|
||||
/*===========================================================================*/
|
||||
|
||||
#endif /* CHCONF_H */
|
||||
|
||||
/** @} */
|
||||
@@ -0,0 +1,97 @@
|
||||
/*
|
||||
Copyright 2015 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xCA04
|
||||
#define PRODUCT_ID 0x5A65
|
||||
#define DEVICE_VER 0x0001
|
||||
/* in python2: list(u"whatever".encode('utf-16-le')) */
|
||||
/* at most 32 characters or the ugly hack in usb_main.c borks */
|
||||
#define MANUFACTURER CannonKeys
|
||||
#define PRODUCT Savage65
|
||||
#define DESCRIPTION Savage65 Keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 16
|
||||
|
||||
#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 }
|
||||
#define MATRIX_ROW_PINS { B12, B11, B14, A8, A1 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_LEVELS 6
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BREATHING_PERIOD 6
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
|
||||
#define WS2812_LED_N 20
|
||||
#define RGBLED_NUM WS2812_LED_N
|
||||
#define PORT_WS2812 GPIOB
|
||||
#define PIN_WS2812 15
|
||||
#define WS2812_SPI SPID2
|
||||
|
||||
// EEPROM usage
|
||||
// TODO: refactor with new user EEPROM code (coming soon)
|
||||
#define EEPROM_MAGIC 0x451F
|
||||
#define EEPROM_MAGIC_ADDR 40
|
||||
// Bump this every time we change what we store
|
||||
// This will automatically reset the EEPROM with defaults
|
||||
// and avoid loading invalid data from the EEPROM
|
||||
#define EEPROM_VERSION 0x02
|
||||
#define EEPROM_VERSION_ADDR 42
|
||||
|
||||
|
||||
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
|
||||
// Dynamic macro starts after dynamic keymaps (35+(4*5*15*2)) = (35+600) = 635
|
||||
// start + layer * rows * col * 2
|
||||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
|
||||
#define EEPROM_CUSTOM_BACKLIGHT 684
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 685
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 192
|
||||
#define DYNAMIC_KEYMAP_MACRO_COUNT 16
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
@@ -0,0 +1,354 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/halconf.h
|
||||
* @brief HAL configuration header.
|
||||
* @details HAL configuration file, this file allows to enable or disable the
|
||||
* various device drivers from your application. You may also use
|
||||
* this file in order to override the device drivers default settings.
|
||||
*
|
||||
* @addtogroup HAL_CONF
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _HALCONF_H_
|
||||
#define _HALCONF_H_
|
||||
|
||||
#include "mcuconf.h"
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PAL TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ADC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CAN FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_DAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EXT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2C FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2S FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MMC_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RTC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SDC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL_USB FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SPI TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_UART FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WDG FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* ADC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CAN driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch.
|
||||
*/
|
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
|
||||
#define CAN_USE_SLEEP_MODE TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* I2C driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus.
|
||||
*/
|
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_ZERO_COPY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MMC_SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
* This option is recommended also if the SPI driver does not
|
||||
* use a DMA channel and heavily loads the CPU.
|
||||
*/
|
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define MMC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SDC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card.
|
||||
* @note Attempts are performed at 10mS intervals.
|
||||
*/
|
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_RETRY 100
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards.
|
||||
* @note MMC support is not yet implemented so this option must be kept
|
||||
* at @p FALSE.
|
||||
*/
|
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
|
||||
#define SDC_MMC_SUPPORT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
*/
|
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define SDC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Default bit rate.
|
||||
* @details Configuration parameter, this is the baud rate selected for the
|
||||
* default configuration.
|
||||
*/
|
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_DEFAULT_BITRATE 38400
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial buffers size.
|
||||
* @details Configuration parameter, you can change the depth of the queue
|
||||
* buffers depending on the requirements of your application.
|
||||
* @note The default is 64 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_BUFFERS_SIZE 16
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL_USB driver related setting. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size.
|
||||
* @details Configuration parameter, the buffer size must be a multiple of
|
||||
* the USB data endpoint maximum packet size.
|
||||
* @note The default is 64 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 1
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
|
||||
/*===========================================================================*/
|
||||
/* USB driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define USB_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
#endif /* _HALCONF_H_ */
|
||||
|
||||
/** @} */
|
||||
@@ -0,0 +1,13 @@
|
||||
{
|
||||
"keyboard_name": "Savage65",
|
||||
"url": "https://cannonkeys.com",
|
||||
"maintainer": "awkannan",
|
||||
"width": 16,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_default": {
|
||||
"layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}]
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
@@ -0,0 +1,46 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = LAYOUT_default(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[_FN1] = LAYOUT_default(
|
||||
KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, RGB_TOG,
|
||||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
|
||||
BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
@@ -0,0 +1,47 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = LAYOUT_default(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
|
||||
[_FN1] = LAYOUT_default(
|
||||
KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, RGB_TOG,
|
||||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD,
|
||||
BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
@@ -0,0 +1,5 @@
|
||||
# rules.mk overrides to enable VIA
|
||||
|
||||
RAW_ENABLE = yes
|
||||
DYNAMIC_KEYMAP_ENABLE = yes
|
||||
|
||||
@@ -0,0 +1,176 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 3...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F0xx_MCUCONF
|
||||
// #define STM32F070xB
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_HSI14_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 12
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE STM32_PPRE_DIV1
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_USBSW STM32_USBSW_HSI48
|
||||
#define STM32_CECSW STM32_CECSW_HSI
|
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 FALSE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 3
|
||||
#define STM32_SERIAL_USART2_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 2
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
@@ -0,0 +1,12 @@
|
||||
# CannonKeys Savage65
|
||||
|
||||
Savage65 Keyboard
|
||||
|
||||
Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
|
||||
Hardware Supported: STM32F072CBT6
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make cannonkeys/savage65:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -0,0 +1,56 @@
|
||||
# project specific files
|
||||
# SRC = ssd1306.c
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F0xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F072xB
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f0xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = ST_STM32F072B_DISCOVERY
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 6
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
# project specific files
|
||||
VPATH += keyboards/cannonkeys/stm32f072
|
||||
SRC = keyboard.c \
|
||||
led.c
|
||||
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p DF11
|
||||
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX = no # Custom matrix file
|
||||
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
@@ -0,0 +1 @@
|
||||
#include "savage65.h"
|
||||
@@ -0,0 +1,17 @@
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_default( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K115, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \
|
||||
K400, K401, K402, K406, K410, K411, K412, K413, K415 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO, K115 }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \
|
||||
{ K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, KC_NO, K415 } \
|
||||
}
|
||||
@@ -0,0 +1,109 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
const PALConfig pal_default_config = {
|
||||
#if STM32_HAS_GPIOA
|
||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
|
||||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
|
||||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
|
||||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
|
||||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
|
||||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
|
||||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
|
||||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
|
||||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
|
||||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
void enter_bootloader_mode_if_requested(void);
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details This initialization must be performed just after stack setup
|
||||
* and before any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
enter_bootloader_mode_if_requested();
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief MMC_SPI card detection.
|
||||
*/
|
||||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief MMC_SPI card write protection detection.
|
||||
*/
|
||||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
}
|
||||
@@ -0,0 +1,922 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#ifndef BOARD_H
|
||||
#define BOARD_H
|
||||
|
||||
/*
|
||||
* Setup for ST STM32F072B-Discovery board.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_ST_STM32F072B_DISCOVERY
|
||||
#define BOARD_NAME "ST STM32F072B-Discovery"
|
||||
|
||||
/*
|
||||
* Board oscillators-related settings.
|
||||
* NOTE: HSE not fitted.
|
||||
*/
|
||||
#if !defined(STM32_LSECLK)
|
||||
#define STM32_LSECLK 32768
|
||||
#endif
|
||||
|
||||
#define STM32_LSEDRV (3U << 3U)
|
||||
|
||||
#if !defined(STM32_HSECLK)
|
||||
#define STM32_HSECLK 0U
|
||||
#endif
|
||||
|
||||
#define STM32_HSE_BYPASS
|
||||
|
||||
/*
|
||||
* MCU type as defined in the ST header.
|
||||
*/
|
||||
#define STM32F072xB
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_BUTTON 0U
|
||||
#define GPIOA_PIN1 1U
|
||||
#define GPIOA_PIN2 2U
|
||||
#define GPIOA_PIN3 3U
|
||||
#define GPIOA_PIN4 4U
|
||||
#define GPIOA_PIN5 5U
|
||||
#define GPIOA_PIN6 6U
|
||||
#define GPIOA_PIN7 7U
|
||||
#define GPIOA_PIN8 8U
|
||||
#define GPIOA_PIN9 9U
|
||||
#define GPIOA_PIN10 10U
|
||||
#define GPIOA_USB_DM 11U
|
||||
#define GPIOA_USB_DP 12U
|
||||
#define GPIOA_SWDIO 13U
|
||||
#define GPIOA_SWCLK 14U
|
||||
#define GPIOA_PIN15 15U
|
||||
|
||||
#define GPIOB_PIN0 0U
|
||||
#define GPIOB_PIN1 1U
|
||||
#define GPIOB_PIN2 2U
|
||||
#define GPIOB_PIN3 3U
|
||||
#define GPIOB_PIN4 4U
|
||||
#define GPIOB_PIN5 5U
|
||||
#define GPIOB_PIN6 6U
|
||||
#define GPIOB_PIN7 7U
|
||||
#define GPIOB_PIN8 8U
|
||||
#define GPIOB_PIN9 9U
|
||||
#define GPIOB_PIN10 10U
|
||||
#define GPIOB_PIN11 11U
|
||||
#define GPIOB_PIN12 12U
|
||||
#define GPIOB_SPI2_SCK 13U
|
||||
#define GPIOB_SPI2_MISO 14U
|
||||
#define GPIOB_SPI2_MOSI 15U
|
||||
|
||||
#define GPIOC_MEMS_CS 0U
|
||||
#define GPIOC_PIN1 1U
|
||||
#define GPIOC_PIN2 2U
|
||||
#define GPIOC_PIN3 3U
|
||||
#define GPIOC_PIN4 4U
|
||||
#define GPIOC_PIN5 5U
|
||||
#define GPIOC_LED_RED 6U
|
||||
#define GPIOC_LED_BLUE 7U
|
||||
#define GPIOC_LED_ORANGE 8U
|
||||
#define GPIOC_LED_GREEN 9U
|
||||
#define GPIOC_PIN10 10U
|
||||
#define GPIOC_PIN11 11U
|
||||
#define GPIOC_PIN12 12U
|
||||
#define GPIOC_PIN13 13U
|
||||
#define GPIOC_OSC32_IN 14U
|
||||
#define GPIOC_OSC32_OUT 15U
|
||||
|
||||
#define GPIOD_PIN0 0U
|
||||
#define GPIOD_PIN1 1U
|
||||
#define GPIOD_PIN2 2U
|
||||
#define GPIOD_PIN3 3U
|
||||
#define GPIOD_PIN4 4U
|
||||
#define GPIOD_PIN5 5U
|
||||
#define GPIOD_PIN6 6U
|
||||
#define GPIOD_PIN7 7U
|
||||
#define GPIOD_PIN8 8U
|
||||
#define GPIOD_PIN9 9U
|
||||
#define GPIOD_PIN10 10U
|
||||
#define GPIOD_PIN11 11U
|
||||
#define GPIOD_PIN12 12U
|
||||
#define GPIOD_PIN13 13U
|
||||
#define GPIOD_PIN14 14U
|
||||
#define GPIOD_PIN15 15U
|
||||
|
||||
#define GPIOE_PIN0 0U
|
||||
#define GPIOE_PIN1 1U
|
||||
#define GPIOE_PIN2 2U
|
||||
#define GPIOE_PIN3 3U
|
||||
#define GPIOE_PIN4 4U
|
||||
#define GPIOE_PIN5 5U
|
||||
#define GPIOE_PIN6 6U
|
||||
#define GPIOE_PIN7 7U
|
||||
#define GPIOE_PIN8 8U
|
||||
#define GPIOE_PIN9 9U
|
||||
#define GPIOE_PIN10 10U
|
||||
#define GPIOE_PIN11 11U
|
||||
#define GPIOE_PIN12 12U
|
||||
#define GPIOE_PIN13 13U
|
||||
#define GPIOE_PIN14 14U
|
||||
#define GPIOE_PIN15 15U
|
||||
|
||||
#define GPIOF_OSC_IN 0U
|
||||
#define GPIOF_OSC_OUT 1U
|
||||
#define GPIOF_PIN2 2U
|
||||
#define GPIOF_PIN3 3U
|
||||
#define GPIOF_PIN4 4U
|
||||
#define GPIOF_PIN5 5U
|
||||
#define GPIOF_PIN6 6U
|
||||
#define GPIOF_PIN7 7U
|
||||
#define GPIOF_PIN8 8U
|
||||
#define GPIOF_PIN9 9U
|
||||
#define GPIOF_PIN10 10U
|
||||
#define GPIOF_PIN11 11U
|
||||
#define GPIOF_PIN12 12U
|
||||
#define GPIOF_PIN13 13U
|
||||
#define GPIOF_PIN14 14U
|
||||
#define GPIOF_PIN15 15U
|
||||
|
||||
/*
|
||||
* IO lines assignments.
|
||||
*/
|
||||
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
|
||||
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
|
||||
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
|
||||
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
|
||||
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
|
||||
|
||||
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
|
||||
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
|
||||
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
|
||||
|
||||
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
|
||||
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
|
||||
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
|
||||
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
|
||||
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
|
||||
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
|
||||
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
|
||||
|
||||
|
||||
|
||||
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
|
||||
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
|
||||
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
|
||||
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
|
||||
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
|
||||
#define PIN_ODR_LOW(n) (0U << (n))
|
||||
#define PIN_ODR_HIGH(n) (1U << (n))
|
||||
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
|
||||
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
|
||||
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
|
||||
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
|
||||
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
|
||||
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
|
||||
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
|
||||
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
|
||||
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
|
||||
|
||||
/*
|
||||
* GPIOA setup:
|
||||
*
|
||||
* PA0 - BUTTON (input floating).
|
||||
* PA1 - PIN1 (input pullup).
|
||||
* PA2 - PIN2 (input pullup).
|
||||
* PA3 - PIN3 (input pullup).
|
||||
* PA4 - PIN4 (input pullup).
|
||||
* PA5 - PIN5 (input pullup).
|
||||
* PA6 - PIN6 (input pullup).
|
||||
* PA7 - PIN7 (input pullup).
|
||||
* PA8 - PIN8 (input pullup).
|
||||
* PA9 - PIN9 (input pullup).
|
||||
* PA10 - PIN10 (input pullup).
|
||||
* PA11 - USB_DM (input floating).
|
||||
* PA12 - USB_DP (input floating).
|
||||
* PA13 - SWDIO (alternate 0).
|
||||
* PA14 - SWCLK (alternate 0).
|
||||
* PA15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOA_USB_DM) | \
|
||||
PIN_MODE_INPUT(GPIOA_USB_DP) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
|
||||
PIN_MODE_INPUT(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
|
||||
PIN_OSPEED_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
|
||||
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
|
||||
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
|
||||
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
|
||||
PIN_PUPDR_PULLUP(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOA_USB_DM) | \
|
||||
PIN_ODR_HIGH(GPIOA_USB_DP) | \
|
||||
PIN_ODR_HIGH(GPIOA_SWDIO) | \
|
||||
PIN_ODR_HIGH(GPIOA_SWCLK) | \
|
||||
PIN_ODR_HIGH(GPIOA_PIN15))
|
||||
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN7, 0U))
|
||||
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
|
||||
PIN_AFIO_AF(GPIOA_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOB setup:
|
||||
*
|
||||
* PB0 - PIN0 (input pullup).
|
||||
* PB1 - PIN1 (input pullup).
|
||||
* PB2 - PIN2 (input pullup).
|
||||
* PB3 - PIN3 (input pullup).
|
||||
* PB4 - PIN4 (input pullup).
|
||||
* PB5 - PIN5 (input pullup).
|
||||
* PB6 - PIN6 (input pullup).
|
||||
* PB7 - PIN7 (input pullup).
|
||||
* PB8 - PIN8 (input pullup).
|
||||
* PB9 - PIN9 (input pullup).
|
||||
* PB10 - PIN10 (input pullup).
|
||||
* PB11 - PIN11 (input pullup).
|
||||
* PB12 - PIN12 (input pullup).
|
||||
* PB13 - SPI2_SCK (alternate 0).
|
||||
* PB14 - SPI2_MISO (alternate 0).
|
||||
* PB15 - SPI2_MOSI (alternate 0).
|
||||
*/
|
||||
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOB_PIN12) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
|
||||
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
|
||||
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
|
||||
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOB_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
|
||||
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
|
||||
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN7, 0U))
|
||||
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
|
||||
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
|
||||
|
||||
/*
|
||||
* GPIOC setup:
|
||||
*
|
||||
* PC0 - MEMS_CS (output pushpull maximum).
|
||||
* PC1 - PIN1 (input pullup).
|
||||
* PC2 - PIN2 (input pullup).
|
||||
* PC3 - PIN3 (input pullup).
|
||||
* PC4 - PIN4 (input pullup).
|
||||
* PC5 - PIN5 (input pullup).
|
||||
* PC6 - LED_RED (output pushpull maximum).
|
||||
* PC7 - LED_BLUE (output pushpull maximum).
|
||||
* PC8 - LED_ORANGE (output pushpull maximum).
|
||||
* PC9 - LED_GREEN (output pushpull maximum).
|
||||
* PC10 - PIN10 (input pullup).
|
||||
* PC11 - PIN11 (input pullup).
|
||||
* PC12 - PIN12 (input pullup).
|
||||
* PC13 - PIN13 (input pullup).
|
||||
* PC14 - OSC32_IN (input floating).
|
||||
* PC15 - OSC32_OUT (input floating).
|
||||
*/
|
||||
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN5) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
|
||||
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOC_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
|
||||
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
|
||||
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
|
||||
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN5) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_RED) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
|
||||
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOC_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
|
||||
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
|
||||
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
|
||||
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
|
||||
|
||||
/*
|
||||
* GPIOD setup:
|
||||
*
|
||||
* PD0 - PIN0 (input pullup).
|
||||
* PD1 - PIN1 (input pullup).
|
||||
* PD2 - PIN2 (input pullup).
|
||||
* PD3 - PIN3 (input pullup).
|
||||
* PD4 - PIN4 (input pullup).
|
||||
* PD5 - PIN5 (input pullup).
|
||||
* PD6 - PIN6 (input pullup).
|
||||
* PD7 - PIN7 (input pullup).
|
||||
* PD8 - PIN8 (input pullup).
|
||||
* PD9 - PIN9 (input pullup).
|
||||
* PD10 - PIN10 (input pullup).
|
||||
* PD11 - PIN11 (input pullup).
|
||||
* PD12 - PIN12 (input pullup).
|
||||
* PD13 - PIN13 (input pullup).
|
||||
* PD14 - PIN14 (input pullup).
|
||||
* PD15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOD_PIN15))
|
||||
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN7, 0U))
|
||||
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOD_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOE setup:
|
||||
*
|
||||
* PE0 - PIN0 (input pullup).
|
||||
* PE1 - PIN1 (input pullup).
|
||||
* PE2 - PIN2 (input pullup).
|
||||
* PE3 - PIN3 (input pullup).
|
||||
* PE4 - PIN4 (input pullup).
|
||||
* PE5 - PIN5 (input pullup).
|
||||
* PE6 - PIN6 (input pullup).
|
||||
* PE7 - PIN7 (input pullup).
|
||||
* PE8 - PIN8 (input pullup).
|
||||
* PE9 - PIN9 (input pullup).
|
||||
* PE10 - PIN10 (input pullup).
|
||||
* PE11 - PIN11 (input pullup).
|
||||
* PE12 - PIN12 (input pullup).
|
||||
* PE13 - PIN13 (input pullup).
|
||||
* PE14 - PIN14 (input pullup).
|
||||
* PE15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN1) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN1) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOE_PIN15))
|
||||
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN7, 0U))
|
||||
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOE_PIN15, 0U))
|
||||
|
||||
/*
|
||||
* GPIOF setup:
|
||||
*
|
||||
* PF0 - OSC_IN (input floating).
|
||||
* PF1 - OSC_OUT (input floating).
|
||||
* PF2 - PIN2 (input pullup).
|
||||
* PF3 - PIN3 (input pullup).
|
||||
* PF4 - PIN4 (input pullup).
|
||||
* PF5 - PIN5 (input pullup).
|
||||
* PF6 - PIN6 (input pullup).
|
||||
* PF7 - PIN7 (input pullup).
|
||||
* PF8 - PIN8 (input pullup).
|
||||
* PF9 - PIN9 (input pullup).
|
||||
* PF10 - PIN10 (input pullup).
|
||||
* PF11 - PIN11 (input pullup).
|
||||
* PF12 - PIN12 (input pullup).
|
||||
* PF13 - PIN13 (input pullup).
|
||||
* PF14 - PIN14 (input pullup).
|
||||
* PF15 - PIN15 (input pullup).
|
||||
*/
|
||||
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
|
||||
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN2) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN3) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN4) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN5) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN6) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN7) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN8) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN9) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN10) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN11) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN12) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN13) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN14) | \
|
||||
PIN_MODE_INPUT(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
|
||||
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
|
||||
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
|
||||
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
|
||||
PIN_PUPDR_PULLUP(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
|
||||
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN2) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN3) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN4) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN5) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN6) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN7) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN8) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN9) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN10) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN11) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN12) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN13) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN14) | \
|
||||
PIN_ODR_HIGH(GPIOF_PIN15))
|
||||
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN7, 0U))
|
||||
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
|
||||
PIN_AFIO_AF(GPIOF_PIN15, 0U))
|
||||
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void boardInit(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* BOARD_H */
|
||||
@@ -0,0 +1,5 @@
|
||||
# List of all the board related files.
|
||||
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY
|
||||
@@ -0,0 +1,703 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!-- STM32F0xx board Template -->
|
||||
<board
|
||||
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
|
||||
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
|
||||
<configuration_settings>
|
||||
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
|
||||
<output_path>..</output_path>
|
||||
<hal_version>3.0.x</hal_version>
|
||||
</configuration_settings>
|
||||
<board_name>ST STM32F072B-Discovery</board_name>
|
||||
<board_id>ST_STM32F072B_DISCOVERY</board_id>
|
||||
<board_functions></board_functions>
|
||||
<subtype>STM32F072xB</subtype>
|
||||
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
|
||||
LSEBypass="false" LSEDrive="3 High Drive (default)" />
|
||||
<ports>
|
||||
<GPIOA>
|
||||
<pin0
|
||||
ID="BUTTON"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID="USB_DM"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID="USB_DP"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID="SWDIO"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="SWCLK"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullDown"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOA>
|
||||
<GPIOB>
|
||||
<pin0
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID="SPI2_SCK"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="SPI2_MISO"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID="SPI2_MOSI"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Alternate"
|
||||
Alternate="0" />
|
||||
</GPIOB>
|
||||
<GPIOC>
|
||||
<pin0
|
||||
ID="MEMS_CS"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID="LED_RED"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID="LED_BLUE"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID="LED_ORANGE"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" ></pin8>
|
||||
<pin9
|
||||
ID="LED_GREEN"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="Low"
|
||||
Mode="Output"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID="OSC32_IN"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID="OSC32_OUT"
|
||||
Type="PushPull"
|
||||
Speed="Maximum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOC>
|
||||
<GPIOD>
|
||||
<pin0
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOD>
|
||||
<GPIOE>
|
||||
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
|
||||
Level="High" Mode="Input" Alternate="0" />
|
||||
</GPIOE>
|
||||
<GPIOF>
|
||||
<pin0
|
||||
ID="OSC_IN"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin1
|
||||
ID="OSC_OUT"
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="Floating"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin2
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin3
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin4
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin5
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin6
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin7
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin8
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin9
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin10
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin11
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin12
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin13
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin14
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
<pin15
|
||||
ID=""
|
||||
Type="PushPull"
|
||||
Speed="Minimum"
|
||||
Resistor="PullUp"
|
||||
Level="High"
|
||||
Mode="Input"
|
||||
Alternate="0" />
|
||||
</GPIOF>
|
||||
</ports>
|
||||
</board>
|
||||
@@ -0,0 +1,7 @@
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here (page 175):
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800
|
||||
@@ -0,0 +1,524 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/chconf.h
|
||||
* @brief Configuration file template.
|
||||
* @details A copy of this file must be placed in each project directory, it
|
||||
* contains the application specific kernel settings.
|
||||
*
|
||||
* @addtogroup config
|
||||
* @details Kernel related settings and hooks.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef CHCONF_H
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name System timers settings
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System time counter resolution.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#define CH_CFG_ST_RESOLUTION 32
|
||||
|
||||
/**
|
||||
* @brief System tick frequency.
|
||||
* @details Frequency of the system timer that drives the system ticks. This
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#define CH_CFG_ST_FREQUENCY 10000
|
||||
|
||||
/**
|
||||
* @brief Time delta constant for the tick-less mode.
|
||||
* @note If this value is zero then the system uses the classic
|
||||
* periodic tick. This value represents the minimum number
|
||||
* of ticks that is safe to specify in a timeout directive.
|
||||
* The value one is not valid, timeouts are rounded up to
|
||||
* this value.
|
||||
*/
|
||||
#define CH_CFG_ST_TIMEDELTA 2
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel parameters and options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Round robin interval.
|
||||
* @details This constant is the number of system ticks allowed for the
|
||||
* threads before preemption occurs. Setting this value to zero
|
||||
* disables the preemption for threads with equal priority and the
|
||||
* round robin becomes cooperative. Note that higher priority
|
||||
* threads can still preempt, the kernel is always preemptive.
|
||||
* @note Disabling the round robin preemption makes the kernel more compact
|
||||
* and generally faster.
|
||||
* @note The round robin preemption is not supported in tickless mode and
|
||||
* must be set to zero in that case.
|
||||
*/
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
* does not spawn the idle thread. The application @p main()
|
||||
* function becomes the idle thread and must implement an
|
||||
* infinite loop.
|
||||
*/
|
||||
#define CH_CFG_NO_IDLE_THREAD FALSE
|
||||
|
||||
/* Use __WFI in the idle thread for waiting. Does lower the power
|
||||
* consumption. */
|
||||
#define CORTEX_ENABLE_WFI_IDLE TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Performance options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief OS optimization.
|
||||
* @details If enabled then time efficient rather than space efficient code
|
||||
* is used when two possible implementations exist.
|
||||
*
|
||||
* @note This is not related to the compiler optimization options.
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_OPTIMIZE_SPEED FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Subsystem options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Time Measurement APIs.
|
||||
* @details If enabled then the time measurement APIs are included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_TM FALSE
|
||||
|
||||
/**
|
||||
* @brief Threads registry APIs.
|
||||
* @details If enabled then the registry APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
|
||||
/**
|
||||
* @brief Threads synchronization APIs.
|
||||
* @details If enabled then the @p chThdWait() function is included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores APIs.
|
||||
* @details If enabled then the Semaphores APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores queuing mode.
|
||||
* @details If enabled then the threads are enqueued on semaphores by
|
||||
* priority rather than in FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mutexes APIs.
|
||||
* @details If enabled then the mutexes APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables recursive behavior on mutexes.
|
||||
* @note Recursive mutexes are heavier and have an increased
|
||||
* memory footprint.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs.
|
||||
* @details If enabled then the conditional variables APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs with timeout.
|
||||
* @details If enabled then the conditional variables APIs with timeout
|
||||
* specification are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_CONDVARS.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs.
|
||||
* @details If enabled then the event flags APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS TRUE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs with timeout.
|
||||
* @details If enabled then the events APIs with timeout specification
|
||||
* are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_EVENTS.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages APIs.
|
||||
* @details If enabled then the synchronous messages APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages queuing mode.
|
||||
* @details If enabled then messages are served by priority rather than in
|
||||
* FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_MESSAGES.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
* included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Core Memory Manager APIs.
|
||||
* @details If enabled then the core memory manager APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMCORE FALSE
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
|
||||
* @p CH_CFG_USE_SEMAPHORES.
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#define CH_CFG_USE_HEAP FALSE
|
||||
|
||||
/**
|
||||
* @brief Memory Pools Allocator APIs.
|
||||
* @details If enabled then the memory pools allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMPOOLS FALSE
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#define CH_CFG_USE_DYNAMIC FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Debug options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Debug option, kernel statistics.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_STATISTICS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, system state check.
|
||||
* @details If enabled the correct call protocol for system APIs is checked
|
||||
* at runtime.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, parameters checks.
|
||||
* @details If enabled then the checks on the API functions input
|
||||
* parameters are activated.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_CHECKS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, consistency checks.
|
||||
* @details If enabled then all the assertions in the kernel code are
|
||||
* activated. This includes consistency checks inside the kernel,
|
||||
* runtime anomalies and port-defined checks.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_ASSERTS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, trace buffer.
|
||||
* @details If enabled then the trace buffer is activated.
|
||||
*
|
||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
|
||||
|
||||
/**
|
||||
* @brief Trace buffer entries.
|
||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
|
||||
* different from @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_BUFFER_SIZE 128
|
||||
|
||||
/**
|
||||
* @brief Debug option, stack checks.
|
||||
* @details If enabled then a runtime stack check is performed.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note The stack check is performed in a architecture/port dependent way.
|
||||
* It may not be implemented or some ports.
|
||||
* @note The default failure mode is to halt the system with the global
|
||||
* @p panic_msg variable set to @p NULL.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_STACK_CHECK FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, stacks initialization.
|
||||
* @details If enabled then the threads working area is filled with a byte
|
||||
* value when a thread is created. This can be useful for the
|
||||
* runtime measurement of the used stack.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_FILL_THREADS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, threads profiling.
|
||||
* @details If enabled then a field is added to the @p thread_t structure that
|
||||
* counts the system ticks occurred while executing the thread.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note This debug option is not currently compatible with the
|
||||
* tickless mode.
|
||||
*/
|
||||
#define CH_DBG_THREADS_PROFILING FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel hooks
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Threads descriptor structure extension.
|
||||
* @details User fields added to the end of the @p thread_t structure.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief Threads initialization hook.
|
||||
* @details User initialization code added to the @p chThdInit() API.
|
||||
*
|
||||
* @note It is invoked from within @p chThdInit() and implicitly from all
|
||||
* the threads creation APIs.
|
||||
*/
|
||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads finalization hook.
|
||||
* @details User finalization code added to the @p chThdExit() API.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
|
||||
/* Add threads finalization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Context switch hook.
|
||||
* @details This hook is invoked just before switching between threads.
|
||||
*/
|
||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
|
||||
/* Context switch code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR enter hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
|
||||
/* IRQ prologue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR exit hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
|
||||
/* IRQ epilogue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread enter hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to activate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_ENTER_HOOK() { \
|
||||
/* Idle-enter code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread leave hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to deactivate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \
|
||||
/* Idle-leave code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle Loop hook.
|
||||
* @details This hook is continuously invoked by the idle thread loop.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LOOP_HOOK() { \
|
||||
/* Idle loop code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System tick event hook.
|
||||
* @details This hook is invoked in the system tick handler immediately
|
||||
* after processing the virtual timers queue.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \
|
||||
/* System tick event code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System halt hook.
|
||||
* @details This hook is invoked in case to a system halting error before
|
||||
* the system is halted.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
|
||||
/* System halt code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Trace hook.
|
||||
* @details This hook is invoked each time a new record is written in the
|
||||
* trace buffer.
|
||||
*/
|
||||
#define CH_CFG_TRACE_HOOK(tep) { \
|
||||
/* Trace code here.*/ \
|
||||
}
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Port-specific settings (override port settings defaulted in chcore.h). */
|
||||
/*===========================================================================*/
|
||||
|
||||
#endif /* CHCONF_H */
|
||||
|
||||
/** @} */
|
||||
@@ -0,0 +1,97 @@
|
||||
/*
|
||||
Copyright 2015 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xCA04
|
||||
#define PRODUCT_ID 0x70F2
|
||||
#define DEVICE_VER 0x0001
|
||||
/* in python2: list(u"whatever".encode('utf-16-le')) */
|
||||
/* at most 32 characters or the ugly hack in usb_main.c borks */
|
||||
#define MANUFACTURER CannonKeys
|
||||
#define PRODUCT TMOv2
|
||||
#define DESCRIPTION TMOv2 Keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
#define MATRIX_COL_PINS { B14, A14, C13, C14, C15, F0, F1, B9, B8, B7, B6, B5, B4, B3, A15 }
|
||||
#define MATRIX_ROW_PINS { A10, A9, A8, B12 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_LEVELS 6
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BREATHING_PERIOD 6
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
|
||||
#define WS2812_LED_N 22
|
||||
#define RGBLED_NUM WS2812_LED_N
|
||||
#define PORT_WS2812 GPIOB
|
||||
#define PIN_WS2812 15
|
||||
#define WS2812_SPI SPID2
|
||||
|
||||
// EEPROM usage
|
||||
// TODO: refactor with new user EEPROM code (coming soon)
|
||||
#define EEPROM_MAGIC 0x451F
|
||||
#define EEPROM_MAGIC_ADDR 40
|
||||
// Bump this every time we change what we store
|
||||
// This will automatically reset the EEPROM with defaults
|
||||
// and avoid loading invalid data from the EEPROM
|
||||
#define EEPROM_VERSION 0x02
|
||||
#define EEPROM_VERSION_ADDR 42
|
||||
|
||||
|
||||
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
|
||||
// Dynamic macro starts after dynamic keymaps (43+(4*4*15*2)) = (43+480) = 523
|
||||
// start + layer * rows * col * 2c
|
||||
#define DYNAMIC_KEYMAP_EEPROM_ADDR 43
|
||||
#define EEPROM_CUSTOM_BACKLIGHT 523
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 524
|
||||
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 200
|
||||
#define DYNAMIC_KEYMAP_MACRO_COUNT 16
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
@@ -0,0 +1,354 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/halconf.h
|
||||
* @brief HAL configuration header.
|
||||
* @details HAL configuration file, this file allows to enable or disable the
|
||||
* various device drivers from your application. You may also use
|
||||
* this file in order to override the device drivers default settings.
|
||||
*
|
||||
* @addtogroup HAL_CONF
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef _HALCONF_H_
|
||||
#define _HALCONF_H_
|
||||
|
||||
#include "mcuconf.h"
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PAL TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ADC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CAN FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_DAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EXT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2C TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2S FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MMC_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RTC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SDC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL_USB FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SPI TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_UART FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WDG FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* ADC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CAN driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch.
|
||||
*/
|
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
|
||||
#define CAN_USE_SLEEP_MODE TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* I2C driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus.
|
||||
*/
|
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_ZERO_COPY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MMC_SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
* This option is recommended also if the SPI driver does not
|
||||
* use a DMA channel and heavily loads the CPU.
|
||||
*/
|
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define MMC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SDC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card.
|
||||
* @note Attempts are performed at 10mS intervals.
|
||||
*/
|
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_RETRY 100
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards.
|
||||
* @note MMC support is not yet implemented so this option must be kept
|
||||
* at @p FALSE.
|
||||
*/
|
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
|
||||
#define SDC_MMC_SUPPORT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
*/
|
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define SDC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Default bit rate.
|
||||
* @details Configuration parameter, this is the baud rate selected for the
|
||||
* default configuration.
|
||||
*/
|
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_DEFAULT_BITRATE 38400
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial buffers size.
|
||||
* @details Configuration parameter, you can change the depth of the queue
|
||||
* buffers depending on the requirements of your application.
|
||||
* @note The default is 64 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_BUFFERS_SIZE 16
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL_USB driver related setting. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size.
|
||||
* @details Configuration parameter, the buffer size must be a multiple of
|
||||
* the USB data endpoint maximum packet size.
|
||||
* @note The default is 64 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 1
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
|
||||
/*===========================================================================*/
|
||||
/* USB driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define USB_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
#endif /* _HALCONF_H_ */
|
||||
|
||||
/** @} */
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"keyboard_name": "TMOv2",
|
||||
"url": "https://cannonkeys.com",
|
||||
"maintainer": "awkannan",
|
||||
"width": 17,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT_default": {
|
||||
"layout": [{"x":0, "y":0}, {"label":"Tab", "x":1.25, "y":0, "w":1.5}, {"label":"Q", "x":2.75, "y":0}, {"label":"W", "x":3.75, "y":0}, {"label":"E", "x":4.75, "y":0}, {"label":"R", "x":5.75, "y":0}, {"label":"T", "x":6.75, "y":0}, {"label":"Y", "x":7.75, "y":0}, {"label":"U", "x":8.75, "y":0}, {"label":"I", "x":9.75, "y":0}, {"label":"O", "x":10.75, "y":0}, {"label":"P", "x":11.75, "y":0}, {"label":"{", "x":12.75, "y":0}, {"label":"}", "x":13.75, "y":0}, {"label":"Backspace", "x":14.75, "y":0}, {"x":0, "y":1}, {"label":"Caps Lock", "x":1.25, "y":1, "w":1.75}, {"label":"A", "x":3, "y":1}, {"label":"S", "x":4, "y":1}, {"label":"D", "x":5, "y":1}, {"label":"F", "x":6, "y":1}, {"label":"G", "x":7, "y":1}, {"label":"H", "x":8, "y":1}, {"label":"J", "x":9, "y":1}, {"label":"K", "x":10, "y":1}, {"label":"L", "x":11, "y":1}, {"label":":", "x":12, "y":1}, {"label":"\"", "x":13, "y":1}, {"label":"Enter", "x":14, "y":1, "w":1.75}, {"x":0, "y":2}, {"label":"Shift", "x":1.25, "y":2, "w":2.25}, {"label":"Z", "x":3.5, "y":2}, {"label":"X", "x":4.5, "y":2}, {"label":"C", "x":5.5, "y":2}, {"label":"V", "x":6.5, "y":2}, {"label":"B", "x":7.5, "y":2}, {"label":"N", "x":8.5, "y":2}, {"label":"M", "x":9.5, "y":2}, {"label":"<", "x":10.5, "y":2}, {"label":">", "x":11.5, "y":2}, {"label":"?", "x":12.5, "y":2}, {"label":"Shift", "x":13.5, "y":2, "w":1.25}, {"x":14.75, "y":2}, {"x":0, "y":3}, {"label":"Win", "x":3.25, "y":3}, {"label":"Alt", "x":4.25, "y":3, "w":1.5}, {"x":5.75, "y":3, "w":2.25}, {"x":8, "y":3, "w":2.75}, {"label":"Alt", "x":10.75, "y":3, "w":1.5}, {"label":"Menu", "x":12.25, "y":3}]
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,60 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
_FN2,
|
||||
_FN3,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = LAYOUT_default(
|
||||
BL_INC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||
BL_DEC, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
RGB_MOD, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN2),
|
||||
RGB_TOG, KC_LALT, KC_LGUI, LT(_FN1, KC_SPC), KC_SPC, KC_RALT, MO(_FN3)
|
||||
),
|
||||
|
||||
[_FN1] = LAYOUT_default(
|
||||
KC_TRNS, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
[_FN2] = LAYOUT_default(
|
||||
RGB_TOG, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,
|
||||
RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
[_FN3] = LAYOUT_default(
|
||||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
@@ -0,0 +1,60 @@
|
||||
/*
|
||||
Copyright 2012,2013 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
_FN2,
|
||||
_FN3,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BASE] = LAYOUT_default(
|
||||
BL_INC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||
BL_DEC, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
RGB_MOD, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN2),
|
||||
RGB_TOG, KC_LALT, KC_LGUI, LT(_FN1, KC_SPC), KC_SPC, KC_RALT, MO(_FN3)
|
||||
),
|
||||
|
||||
[_FN1] = LAYOUT_default(
|
||||
KC_TRNS, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
[_FN2] = LAYOUT_default(
|
||||
RGB_TOG, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,
|
||||
RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
[_FN3] = LAYOUT_default(
|
||||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
@@ -0,0 +1,5 @@
|
||||
# rules.mk overrides to enable VIA
|
||||
|
||||
RAW_ENABLE = yes
|
||||
DYNAMIC_KEYMAP_ENABLE = yes
|
||||
|
||||
@@ -0,0 +1,176 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef _MCUCONF_H_
|
||||
#define _MCUCONF_H_
|
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 3...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F0xx_MCUCONF
|
||||
// #define STM32F070xB
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_HSI14_ENABLED TRUE
|
||||
#define STM32_HSI48_ENABLED FALSE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED FALSE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
|
||||
#define STM32_PREDIV_VALUE 1
|
||||
#define STM32_PLLMUL_VALUE 12
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE STM32_PPRE_DIV1
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
||||
#define STM32_ADCSW STM32_ADCSW_HSI14
|
||||
#define STM32_USBSW STM32_USBSW_HSI48
|
||||
#define STM32_CECSW STM32_CECSW_HSI
|
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI
|
||||
#define STM32_USART1SW STM32_USART1SW_PCLK
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 2
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM14 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
|
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
|
||||
#define STM32_I2C_USE_DMA TRUE
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 FALSE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 3
|
||||
#define STM32_SERIAL_USART2_PRIORITY 3
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 FALSE
|
||||
#define STM32_SPI_USE_SPI2 TRUE
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 2
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
|
||||
|
||||
#endif /* _MCUCONF_H_ */
|
||||
@@ -0,0 +1,12 @@
|
||||
# TMO V2 Keyboard
|
||||
|
||||
TMO V2 Keyboard
|
||||
|
||||
Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan)
|
||||
Hardware Supported: STM32F072CBT6
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make cannonkeys/tmov2:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -0,0 +1,64 @@
|
||||
# project specific files
|
||||
# SRC = ssd1306.c
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F0xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F072xB
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f0xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = ST_STM32F072B_DISCOVERY
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 6
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
# project specific files
|
||||
VPATH += keyboards/cannonkeys/stm32f072
|
||||
SRC = keyboard.c \
|
||||
led.c
|
||||
|
||||
DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
DFU_SUFFIX_ARGS = -v 0483 -p DF11
|
||||
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX = no # Custom matrix file
|
||||
# BACKLIGHT_ENABLE = yes # This is broken on 072 right now
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
@@ -0,0 +1 @@
|
||||
#include "tmov2.h"
|
||||
@@ -0,0 +1,15 @@
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_default( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \
|
||||
K300, K302, K303, K305, K307, K309, K310 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO}, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO}, \
|
||||
{ K300, KC_NO, K302, K303, KC_NO, K305, KC_NO, K307, KC_NO, K309, K310, KC_NO, KC_NO, KC_NO} \
|
||||
}
|
||||
@@ -9,7 +9,7 @@ MCU = atmega32u4
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = lufa-ms
|
||||
BOOTLOADER = atmel-dfu # actually lufa-ms
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
|
||||
@@ -0,0 +1,72 @@
|
||||
/*
|
||||
Copyright 2019 MechMerlin
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x0000
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Gray Studio
|
||||
#define PRODUCT THINK6.5
|
||||
#define DESCRIPTION 65% 6.5 degree custom keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 16
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 }
|
||||
#define MATRIX_COL_PINS { D1, D0, D2, D3, D5, D4, D6, D7, B4, B5, F0, F1, B6, F4, F5, F6 }
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 22
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
/*== all animations enable ==*/
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#endif
|
||||
|
||||
// generated by KBFirmware JSON to QMK Parser
|
||||
// https://noroadsleft.github.io/kbf_qmk_converter/
|
||||
@@ -0,0 +1,71 @@
|
||||
/* Copyright 2019 MechMerlin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "hotswap.h"
|
||||
|
||||
// Optional override functions below.
|
||||
// You can leave any or all of these undefined.
|
||||
// These are only required if you want to perform custom actions.
|
||||
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
setPinOutput(C6);
|
||||
setPinOutput(C7);
|
||||
setPinOutput(F7);
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
|
||||
writePinLow(C7);
|
||||
} else {
|
||||
writePinHigh(C7);
|
||||
}
|
||||
|
||||
if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
|
||||
writePinLow(C6);
|
||||
} else {
|
||||
writePinHigh(C6);
|
||||
}
|
||||
|
||||
if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
|
||||
writePinLow(F7);
|
||||
} else {
|
||||
writePinHigh(F7);
|
||||
}
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
@@ -0,0 +1,35 @@
|
||||
/* Copyright 2019 MechMerlin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_65_ansi_blocker( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, \
|
||||
K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
|
||||
K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \
|
||||
K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, K3F, \
|
||||
K40, K41, K43, K46, K4A, K4B, K4D, K4E, K4F \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E, K0F }, \
|
||||
{ K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
|
||||
{ K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F }, \
|
||||
{ KC_NO, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E, K3F }, \
|
||||
{ K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D, K4E, K4F }, \
|
||||
}
|
||||
|
||||
// generated by KBFirmware JSON to QMK Parser
|
||||
// https://noroadsleft.github.io/kbf_qmk_converter/
|
||||
@@ -0,0 +1,82 @@
|
||||
{
|
||||
"keyboard_name": "THINK6.5",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 16,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_65_ansi_blocker": {
|
||||
"key_count": 67,
|
||||
"layout": [
|
||||
{"label":"K00 (B0,D1)", "x":0, "y":0},
|
||||
{"label":"K01 (B0,D0)", "x":1, "y":0},
|
||||
{"label":"K02 (B0,D2)", "x":2, "y":0},
|
||||
{"label":"K03 (B0,D3)", "x":3, "y":0},
|
||||
{"label":"K04 (B0,D5)", "x":4, "y":0},
|
||||
{"label":"K05 (B0,D4)", "x":5, "y":0},
|
||||
{"label":"K06 (B0,D6)", "x":6, "y":0},
|
||||
{"label":"K07 (B0,D7)", "x":7, "y":0},
|
||||
{"label":"K08 (B0,B4)", "x":8, "y":0},
|
||||
{"label":"K09 (B0,B5)", "x":9, "y":0},
|
||||
{"label":"K0A (B0,F0)", "x":10, "y":0},
|
||||
{"label":"K0B (B0,F1)", "x":11, "y":0},
|
||||
{"label":"K0C (B0,B6)", "x":12, "y":0},
|
||||
{"label":"K0E (B0,F5)", "x":13, "y":0, "w":2},
|
||||
{"label":"K0F (B0,F6)", "x":15, "y":0},
|
||||
{"label":"K10 (B1,D1)", "x":0, "y":1, "w":1.5},
|
||||
{"label":"K12 (B1,D2)", "x":1.5, "y":1},
|
||||
{"label":"K13 (B1,D3)", "x":2.5, "y":1},
|
||||
{"label":"K14 (B1,D5)", "x":3.5, "y":1},
|
||||
{"label":"K15 (B1,D4)", "x":4.5, "y":1},
|
||||
{"label":"K16 (B1,D6)", "x":5.5, "y":1},
|
||||
{"label":"K17 (B1,D7)", "x":6.5, "y":1},
|
||||
{"label":"K18 (B1,B4)", "x":7.5, "y":1},
|
||||
{"label":"K19 (B1,B5)", "x":8.5, "y":1},
|
||||
{"label":"K1A (B1,F0)", "x":9.5, "y":1},
|
||||
{"label":"K1B (B1,F1)", "x":10.5, "y":1},
|
||||
{"label":"K1C (B1,B6)", "x":11.5, "y":1},
|
||||
{"label":"K1D (B1,F4)", "x":12.5, "y":1},
|
||||
{"label":"K1E (B1,F5)", "x":13.5, "y":1, "w":1.5},
|
||||
{"label":"K1F (B1,F6)", "x":15, "y":1},
|
||||
{"label":"K20 (B2,D1)", "x":0, "y":2, "w":1.75},
|
||||
{"label":"K22 (B2,D2)", "x":1.75, "y":2},
|
||||
{"label":"K23 (B2,D3)", "x":2.75, "y":2},
|
||||
{"label":"K24 (B2,D5)", "x":3.75, "y":2},
|
||||
{"label":"K25 (B2,D4)", "x":4.75, "y":2},
|
||||
{"label":"K26 (B2,D6)", "x":5.75, "y":2},
|
||||
{"label":"K27 (B2,D7)", "x":6.75, "y":2},
|
||||
{"label":"K28 (B2,B4)", "x":7.75, "y":2},
|
||||
{"label":"K29 (B2,B5)", "x":8.75, "y":2},
|
||||
{"label":"K2A (B2,F0)", "x":9.75, "y":2},
|
||||
{"label":"K2B (B2,F1)", "x":10.75, "y":2},
|
||||
{"label":"K2C (B2,B6)", "x":11.75, "y":2},
|
||||
{"label":"K2D (B2,F4)", "x":12.75, "y":2, "w":2.25},
|
||||
{"label":"K2F (B2,F6)", "x":15, "y":2},
|
||||
{"label":"K31 (B3,D0)", "x":0, "y":3, "w":2.25},
|
||||
{"label":"K32 (B3,D2)", "x":2.25, "y":3},
|
||||
{"label":"K33 (B3,D3)", "x":3.25, "y":3},
|
||||
{"label":"K34 (B3,D5)", "x":4.25, "y":3},
|
||||
{"label":"K35 (B3,D4)", "x":5.25, "y":3},
|
||||
{"label":"K36 (B3,D6)", "x":6.25, "y":3},
|
||||
{"label":"K37 (B3,D7)", "x":7.25, "y":3},
|
||||
{"label":"K38 (B3,B4)", "x":8.25, "y":3},
|
||||
{"label":"K39 (B3,B5)", "x":9.25, "y":3},
|
||||
{"label":"K3A (B3,F0)", "x":10.25, "y":3},
|
||||
{"label":"K3B (B3,F1)", "x":11.25, "y":3},
|
||||
{"label":"K3D (B3,F4)", "x":12.25, "y":3, "w":1.75},
|
||||
{"label":"K3E (B3,F5)", "x":14, "y":3},
|
||||
{"label":"K3F (B3,F6)", "x":15, "y":3},
|
||||
{"label":"K40 (E6,D1)", "x":0, "y":4, "w":1.25},
|
||||
{"label":"K41 (E6,D0)", "x":1.25, "y":4, "w":1.25},
|
||||
{"label":"K43 (E6,D3)", "x":2.5, "y":4, "w":1.25},
|
||||
{"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25},
|
||||
{"label":"K4A (E6,F0)", "x":10, "y":4, "w":1.25},
|
||||
{"label":"K4B (E6,F1)", "x":11.25, "y":4, "w":1.25},
|
||||
{"label":"K4D (E6,F4)", "x":13, "y":4},
|
||||
{"label":"K4E (E6,F5)", "x":14, "y":4},
|
||||
{"label":"K4F (E6,F6)", "x":15, "y":4}
|
||||
]
|
||||
}
|
||||
}
|
||||
,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
/* Copyright 2019 MechMerlin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
@@ -0,0 +1,34 @@
|
||||
/* Copyright 2019 MechMerlin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_65_ansi_blocker(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
[1] = LAYOUT_65_ansi_blocker(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
};
|
||||
@@ -0,0 +1 @@
|
||||
# The default keymap for think65
|
||||
@@ -0,0 +1,15 @@
|
||||
# Think6.5 Hotswap
|
||||
|
||||
65% board with 6.5 degree angle ran by Airpotter and Oldcat. PCB Manufactured by DEMO Studio and Keyboard manufactured by Gray Studio.
|
||||
|
||||
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
|
||||
Hardware Supported: Think6.5 Hotswap PCB
|
||||
Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=100166.0)
|
||||
|
||||
**Note:** The `LAYOUT_65_ansi_blocker` LAYOUT macro utilizes the same pins and switch matrix as the soldered (compatible) version. Any firmware made with this LAYOUT macro can be flashed on both the Solder (Compatible) version and the Hotswap version of the Think6.5.
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make gray_studio/think65/hotswap:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -0,0 +1,40 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||
|
||||
LINK_TIME_OPTIMIZATION_ENABLE = yes
|
||||
|
||||
LAYOUTS = 65_ansi_blocker
|
||||
|
||||
# generated by KBFirmware JSON to QMK Parser
|
||||
# https://noroadsleft.github.io/kbf_qmk_converter/
|
||||
@@ -0,0 +1,73 @@
|
||||
/*
|
||||
Copyright 2019 MechMerlin
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x0000
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Gray Studio
|
||||
#define PRODUCT THINK6.5
|
||||
#define DESCRIPTION 65% 6.5 degree custom keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 16
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
// 0 1 2 3 4 5 6 7 8 9 A B C D E F
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, E6 }
|
||||
#define MATRIX_COL_PINS { D1, D0, D2, D3, D5, D4, D6, D7, B4, B5, F0, F1, B6, F4, F5, F6 }
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define RGB_DI_PIN E2
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 22
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
/*== all animations enable ==*/
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
// /*== or choose animations ==*/
|
||||
// #define RGBLIGHT_EFFECT_BREATHING
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
// #define RGBLIGHT_EFFECT_SNAKE
|
||||
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||
#endif
|
||||
|
||||
// generated by KBFirmware JSON to QMK Parser
|
||||
// https://noroadsleft.github.io/kbf_qmk_converter/
|
||||
@@ -0,0 +1,157 @@
|
||||
{
|
||||
"keyboard_name": "THINK6.5",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"width": 16,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_65_ansi_blocker": {
|
||||
"key_count": 67,
|
||||
"layout": [
|
||||
{"label":"K00 (B0,D1)", "x":0, "y":0},
|
||||
{"label":"K01 (B0,D0)", "x":1, "y":0},
|
||||
{"label":"K02 (B0,D2)", "x":2, "y":0},
|
||||
{"label":"K03 (B0,D3)", "x":3, "y":0},
|
||||
{"label":"K04 (B0,D5)", "x":4, "y":0},
|
||||
{"label":"K05 (B0,D4)", "x":5, "y":0},
|
||||
{"label":"K06 (B0,D6)", "x":6, "y":0},
|
||||
{"label":"K07 (B0,D7)", "x":7, "y":0},
|
||||
{"label":"K08 (B0,B4)", "x":8, "y":0},
|
||||
{"label":"K09 (B0,B5)", "x":9, "y":0},
|
||||
{"label":"K0A (B0,F0)", "x":10, "y":0},
|
||||
{"label":"K0B (B0,F1)", "x":11, "y":0},
|
||||
{"label":"K0C (B0,B6)", "x":12, "y":0},
|
||||
{"label":"K0E (B0,F5)", "x":13, "y":0, "w":2},
|
||||
{"label":"K0F (B0,F6)", "x":15, "y":0},
|
||||
{"label":"K10 (B1,D1)", "x":0, "y":1, "w":1.5},
|
||||
{"label":"K12 (B1,D2)", "x":1.5, "y":1},
|
||||
{"label":"K13 (B1,D3)", "x":2.5, "y":1},
|
||||
{"label":"K14 (B1,D5)", "x":3.5, "y":1},
|
||||
{"label":"K15 (B1,D4)", "x":4.5, "y":1},
|
||||
{"label":"K16 (B1,D6)", "x":5.5, "y":1},
|
||||
{"label":"K17 (B1,D7)", "x":6.5, "y":1},
|
||||
{"label":"K18 (B1,B4)", "x":7.5, "y":1},
|
||||
{"label":"K19 (B1,B5)", "x":8.5, "y":1},
|
||||
{"label":"K1A (B1,F0)", "x":9.5, "y":1},
|
||||
{"label":"K1B (B1,F1)", "x":10.5, "y":1},
|
||||
{"label":"K1C (B1,B6)", "x":11.5, "y":1},
|
||||
{"label":"K1D (B1,F4)", "x":12.5, "y":1},
|
||||
{"label":"K1E (B1,F5)", "x":13.5, "y":1, "w":1.5},
|
||||
{"label":"K1F (B1,F6)", "x":15, "y":1},
|
||||
{"label":"K20 (B2,D1)", "x":0, "y":2, "w":1.75},
|
||||
{"label":"K22 (B2,D2)", "x":1.75, "y":2},
|
||||
{"label":"K23 (B2,D3)", "x":2.75, "y":2},
|
||||
{"label":"K24 (B2,D5)", "x":3.75, "y":2},
|
||||
{"label":"K25 (B2,D4)", "x":4.75, "y":2},
|
||||
{"label":"K26 (B2,D6)", "x":5.75, "y":2},
|
||||
{"label":"K27 (B2,D7)", "x":6.75, "y":2},
|
||||
{"label":"K28 (B2,B4)", "x":7.75, "y":2},
|
||||
{"label":"K29 (B2,B5)", "x":8.75, "y":2},
|
||||
{"label":"K2A (B2,F0)", "x":9.75, "y":2},
|
||||
{"label":"K2B (B2,F1)", "x":10.75, "y":2},
|
||||
{"label":"K2C (B2,B6)", "x":11.75, "y":2},
|
||||
{"label":"K2D (B2,F4)", "x":12.75, "y":2, "w":2.25},
|
||||
{"label":"K2F (B2,F6)", "x":15, "y":2},
|
||||
{"label":"K31 (B3,D0)", "x":0, "y":3, "w":2.25},
|
||||
{"label":"K32 (B3,D2)", "x":2.25, "y":3},
|
||||
{"label":"K33 (B3,D3)", "x":3.25, "y":3},
|
||||
{"label":"K34 (B3,D5)", "x":4.25, "y":3},
|
||||
{"label":"K35 (B3,D4)", "x":5.25, "y":3},
|
||||
{"label":"K36 (B3,D6)", "x":6.25, "y":3},
|
||||
{"label":"K37 (B3,D7)", "x":7.25, "y":3},
|
||||
{"label":"K38 (B3,B4)", "x":8.25, "y":3},
|
||||
{"label":"K39 (B3,B5)", "x":9.25, "y":3},
|
||||
{"label":"K3A (B3,F0)", "x":10.25, "y":3},
|
||||
{"label":"K3B (B3,F1)", "x":11.25, "y":3},
|
||||
{"label":"K3D (B3,F4)", "x":12.25, "y":3, "w":1.75},
|
||||
{"label":"K3E (B3,F5)", "x":14, "y":3},
|
||||
{"label":"K3F (B3,F6)", "x":15, "y":3},
|
||||
{"label":"K40 (E6,D1)", "x":0, "y":4, "w":1.25},
|
||||
{"label":"K41 (E6,D0)", "x":1.25, "y":4, "w":1.25},
|
||||
{"label":"K43 (E6,D3)", "x":2.5, "y":4, "w":1.25},
|
||||
{"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25},
|
||||
{"label":"K4A (E6,F0)", "x":10, "y":4, "w":1.25},
|
||||
{"label":"K4B (E6,F1)", "x":11.25, "y":4, "w":1.25},
|
||||
{"label":"K4D (E6,F4)", "x":13, "y":4},
|
||||
{"label":"K4E (E6,F5)", "x":14, "y":4},
|
||||
{"label":"K4F (E6,F6)", "x":15, "y":4}
|
||||
]
|
||||
},
|
||||
|
||||
"LAYOUT_all": {
|
||||
"key_count": 69,
|
||||
"layout": [
|
||||
{"label":"K00 (B0,D1)", "x":0, "y":0},
|
||||
{"label":"K01 (B0,D0)", "x":1, "y":0},
|
||||
{"label":"K02 (B0,D2)", "x":2, "y":0},
|
||||
{"label":"K03 (B0,D3)", "x":3, "y":0},
|
||||
{"label":"K04 (B0,D5)", "x":4, "y":0},
|
||||
{"label":"K05 (B0,D4)", "x":5, "y":0},
|
||||
{"label":"K06 (B0,D6)", "x":6, "y":0},
|
||||
{"label":"K07 (B0,D7)", "x":7, "y":0},
|
||||
{"label":"K08 (B0,B4)", "x":8, "y":0},
|
||||
{"label":"K09 (B0,B5)", "x":9, "y":0},
|
||||
{"label":"K0A (B0,F0)", "x":10, "y":0},
|
||||
{"label":"K0B (B0,F1)", "x":11, "y":0},
|
||||
{"label":"K0C (B0,B6)", "x":12, "y":0},
|
||||
{"label":"K0D (B0,F4)", "x":13, "y":0},
|
||||
{"label":"K0E (B0,F5)", "x":14, "y":0},
|
||||
{"label":"K0F (B0,F6)", "x":15, "y":0},
|
||||
{"label":"K10 (B1,D1)", "x":0, "y":1, "w":1.5},
|
||||
{"label":"K12 (B1,D2)", "x":1.5, "y":1},
|
||||
{"label":"K13 (B1,D3)", "x":2.5, "y":1},
|
||||
{"label":"K14 (B1,D5)", "x":3.5, "y":1},
|
||||
{"label":"K15 (B1,D4)", "x":4.5, "y":1},
|
||||
{"label":"K16 (B1,D6)", "x":5.5, "y":1},
|
||||
{"label":"K17 (B1,D7)", "x":6.5, "y":1},
|
||||
{"label":"K18 (B1,B4)", "x":7.5, "y":1},
|
||||
{"label":"K19 (B1,B5)", "x":8.5, "y":1},
|
||||
{"label":"K1A (B1,F0)", "x":9.5, "y":1},
|
||||
{"label":"K1B (B1,F1)", "x":10.5, "y":1},
|
||||
{"label":"K1C (B1,B6)", "x":11.5, "y":1},
|
||||
{"label":"K1D (B1,F4)", "x":12.5, "y":1},
|
||||
{"label":"K1E (B1,F5)", "x":13.5, "y":1, "w":1.5},
|
||||
{"label":"K1F (B1,F6)", "x":15, "y":1},
|
||||
{"label":"K20 (B2,D1)", "x":0, "y":2, "w":1.75},
|
||||
{"label":"K22 (B2,D2)", "x":1.75, "y":2},
|
||||
{"label":"K23 (B2,D3)", "x":2.75, "y":2},
|
||||
{"label":"K24 (B2,D5)", "x":3.75, "y":2},
|
||||
{"label":"K25 (B2,D4)", "x":4.75, "y":2},
|
||||
{"label":"K26 (B2,D6)", "x":5.75, "y":2},
|
||||
{"label":"K27 (B2,D7)", "x":6.75, "y":2},
|
||||
{"label":"K28 (B2,B4)", "x":7.75, "y":2},
|
||||
{"label":"K29 (B2,B5)", "x":8.75, "y":2},
|
||||
{"label":"K2A (B2,F0)", "x":9.75, "y":2},
|
||||
{"label":"K2B (B2,F1)", "x":10.75, "y":2},
|
||||
{"label":"K2C (B2,B6)", "x":11.75, "y":2},
|
||||
{"label":"K2D (B2,F4)", "x":12.75, "y":2, "w":2.25},
|
||||
{"label":"K2F (B2,F6)", "x":15, "y":2},
|
||||
{"label":"K30 (B3,D1)", "x":0, "y":3, "w":1.25},
|
||||
{"label":"K31 (B3,D0)", "x":1.25, "y":3},
|
||||
{"label":"K32 (B3,D2)", "x":2.25, "y":3},
|
||||
{"label":"K33 (B3,D3)", "x":3.25, "y":3},
|
||||
{"label":"K34 (B3,D5)", "x":4.25, "y":3},
|
||||
{"label":"K35 (B3,D4)", "x":5.25, "y":3},
|
||||
{"label":"K36 (B3,D6)", "x":6.25, "y":3},
|
||||
{"label":"K37 (B3,D7)", "x":7.25, "y":3},
|
||||
{"label":"K38 (B3,B4)", "x":8.25, "y":3},
|
||||
{"label":"K39 (B3,B5)", "x":9.25, "y":3},
|
||||
{"label":"K3A (B3,F0)", "x":10.25, "y":3},
|
||||
{"label":"K3B (B3,F1)", "x":11.25, "y":3},
|
||||
{"label":"K3D (B3,F4)", "x":12.25, "y":3, "w":1.75},
|
||||
{"label":"K3E (B3,F5)", "x":14, "y":3},
|
||||
{"label":"K3F (B3,F6)", "x":15, "y":3},
|
||||
{"label":"K40 (E6,D1)", "x":0, "y":4, "w":1.25},
|
||||
{"label":"K41 (E6,D0)", "x":1.25, "y":4, "w":1.25},
|
||||
{"label":"K43 (E6,D3)", "x":2.5, "y":4, "w":1.25},
|
||||
{"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25},
|
||||
{"label":"K4A (E6,F0)", "x":10, "y":4, "w":1.25},
|
||||
{"label":"K4B (E6,F1)", "x":11.25, "y":4, "w":1.25},
|
||||
{"label":"K4D (E6,F4)", "x":13, "y":4},
|
||||
{"label":"K4E (E6,F5)", "x":14, "y":4},
|
||||
{"label":"K4F (E6,F6)", "x":15, "y":4}
|
||||
]
|
||||
}
|
||||
}
|
||||
,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
/* Copyright 2019 MechMerlin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
@@ -0,0 +1,34 @@
|
||||
/* Copyright 2019 MechMerlin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_65_ansi_blocker(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT
|
||||
),
|
||||
[1] = LAYOUT_65_ansi_blocker(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
|
||||
};
|
||||
@@ -0,0 +1 @@
|
||||
# The default keymap for think65
|
||||
@@ -0,0 +1,17 @@
|
||||
# Think6.5 Solder (Compatible)
|
||||
|
||||
65% board with 6.5 degree angle ran by Airpotter and Oldcat. PCB Manufactured by DEMO Studio and Keyboard manufactured by Gray Studio.
|
||||
|
||||
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
|
||||
Hardware Supported: Think6.5 Compatible PCB
|
||||
Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=100166.0)
|
||||
|
||||
**Note:** The `LAYOUT_65_ansi_blocker` LAYOUT macro utilizes the same pins and switch matrix as the hotswap version. Any firmware made with this LAYOUT macro can be flashed on both the Solder (Compatible) version and the Hotswap version of the Think6.5.
|
||||
|
||||
**Indicator LEDs:** The solder PCB ONLY supports Caps Lock LEDs unlike the Hotswap version that supports Num Lock, Caps Lock, and Scroll Lock.
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make gray_studio/think65/solder:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -0,0 +1,40 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||
|
||||
LINK_TIME_OPTIMIZATION_ENABLE = yes
|
||||
|
||||
LAYOUTS = 65_ansi_blocker
|
||||
|
||||
# generated by KBFirmware JSON to QMK Parser
|
||||
# https://noroadsleft.github.io/kbf_qmk_converter/
|
||||
@@ -0,0 +1,57 @@
|
||||
/* Copyright 2019 MechMerlin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "solder.h"
|
||||
|
||||
// Optional override functions below.
|
||||
// You can leave any or all of these undefined.
|
||||
// These are only required if you want to perform custom actions.
|
||||
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
setPinOutput(C7);
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
|
||||
writePinLow(C7);
|
||||
} else {
|
||||
writePinHigh(C7);
|
||||
}
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
@@ -0,0 +1,49 @@
|
||||
/* Copyright 2019 MechMerlin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_all( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \
|
||||
K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
|
||||
K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, K3F, \
|
||||
K40, K41, K43, K46, K4A, K4B, K4D, K4E, K4F \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \
|
||||
{ K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
|
||||
{ K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E, K3F }, \
|
||||
{ K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D, K4E, K4F }, \
|
||||
}
|
||||
|
||||
#define LAYOUT_65_ansi_blocker( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, \
|
||||
K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \
|
||||
K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \
|
||||
K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, K3F, \
|
||||
K40, K41, K43, K46, K4A, K4B, K4D, K4E, K4F \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E, K0F }, \
|
||||
{ K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \
|
||||
{ K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F }, \
|
||||
{ KC_NO, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E, K3F }, \
|
||||
{ K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D, K4E, K4F }, \
|
||||
}
|
||||
|
||||
// generated by KBFirmware JSON to QMK Parser
|
||||
// https://noroadsleft.github.io/kbf_qmk_converter/
|
||||
@@ -0,0 +1,32 @@
|
||||
/* Copyright 2019 Angelo Gazzola (nglgzz)
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define ___ KC_NO
|
||||
#define LAYOUT( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \
|
||||
K33, K34, K35, K36, K37, K38 \
|
||||
) { \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \
|
||||
{ ___, ___, ___, K33, K34, K35, K36, K37, K38, ___, ___, ___ } \
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
# 42
|
||||
|
||||
42-keys ergonomic keyboard running on Adafruit Feather BLE.
|
||||
|
||||
|
||||
|
||||
Keyboard Maintainer: [Angelo Gazzola (nglgzz)](https://github.com/nglgzz)
|
||||
Hardware Supported: 42 (rev2, rev3), Feather 32u4 BLE
|
||||
Hardware Availability: [GitHub](https://github.com/nglgzz/42/)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make handwired/42:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -0,0 +1,42 @@
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x0000
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER nglgzz
|
||||
#define PRODUCT 42
|
||||
#define DESCRIPTION BT
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 12
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_COL_PINS { F5, F6, F7, F0, F1, F4, B6, B5, D7, C7, D6, B7 }
|
||||
#define MATRIX_ROW_PINS { D2, D3, D0, D1 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define TAPPING_TERM 100
|
||||
@@ -0,0 +1,47 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// MOD_KC
|
||||
#define CTL_ESC MT(MOD_LCTL, KC_ESCAPE)
|
||||
#define CTL_ENT MT(MOD_LCTL, KC_ENTER)
|
||||
#define ALT_Z MT(MOD_LALT, KC_Z)
|
||||
#define ALT_SLS MT(MOD_LALT, KC_SLASH)
|
||||
#define SU_QUOT MT(MOD_LGUI, KC_QUOTE)
|
||||
#define SU_BSLS MT(MOD_LGUI, KC_BSLS)
|
||||
#define SFT_DEL MT(MOD_LSFT, KC_DELETE)
|
||||
|
||||
// LAYER_KC
|
||||
#define L3_SPC LT(3, KC_SPC)
|
||||
#define L2_SPC LT(2, KC_SPC)
|
||||
#define L1_LBRC LT(1, KC_LBRC)
|
||||
#define L1_RBRC LT(1, KC_RBRC)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// Default Layer
|
||||
LAYOUT(
|
||||
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_BSPC,
|
||||
CTL_ESC, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, CTL_ENT,
|
||||
KC_LSFT, ALT_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , ALT_SLS, SFT_DEL,
|
||||
L1_LBRC, L3_SPC , SU_QUOT, SU_BSLS, L2_SPC , L1_RBRC
|
||||
),
|
||||
// Symbols Layer
|
||||
LAYOUT(
|
||||
KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_EQL ,
|
||||
KC_INS , S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), S(KC_9), S(KC_0), KC_MINS,
|
||||
KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 ,
|
||||
KC_CAPS, OUT_USB, OUT_BT , _______, _______, _______
|
||||
),
|
||||
// Navigation Layer
|
||||
LAYOUT(
|
||||
_______, _______, _______, KC_PGUP, _______, _______, KC_BRIU, _______, KC_UP , _______, _______, _______,
|
||||
_______, _______, KC_HOME, KC_PGDN, KC_END , _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, KC_BRID, KC_VOLD, KC_MUTE, KC_VOLU, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______
|
||||
),
|
||||
// Mouse Layer
|
||||
LAYOUT(
|
||||
_______, _______, KC_WREF, KC_WH_U, KC_WSCH, _______, _______, KC_BTN1, KC_MS_U, KC_BTN2, _______, _______,
|
||||
_______, _______, KC_WH_L, KC_WH_D, KC_WH_R, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______,
|
||||
_______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
||||
@@ -0,0 +1,39 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
F_CPU = 8000000
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328p USBasp
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
UNICODEMAP_ENABLE = no # ^^
|
||||
UCIS_ENABLE = no # ^^
|
||||
BLUETOOTH = AdafruitBLE
|
||||
@@ -4,16 +4,16 @@ Iris
|
||||
A split ergo 4x6 keyboard with 3 or 4 thumb keys made and sold by Keebio. [More info at Keebio](https://keeb.io).
|
||||
|
||||
Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)
|
||||
Hardware Supported: Pro Micro
|
||||
Hardware Supported: Pro Micro, ATmega32u4
|
||||
Hardware Availability: [Keebio](https://keeb.io)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make keebio/iris/rev2:default
|
||||
make keebio/iris/rev4:default
|
||||
|
||||
Example of flashing this keyboard:
|
||||
|
||||
make keebio/iris/rev2:default:avrdude
|
||||
make keebio/iris/rev4:default:flash
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/#/newbs_getting_started) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
||||
|
||||
|
||||
@@ -1 +1,34 @@
|
||||
BACKLIGHT_ENABLE = no
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
|
||||
@@ -1 +1,34 @@
|
||||
BACKLIGHT_ENABLE = no
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
|
||||
@@ -1,2 +1,34 @@
|
||||
RGBLIGHT_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
|
||||
@@ -1,3 +1,35 @@
|
||||
RGBLIGHT_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
ENCODER_ENABLE = yes
|
||||
|
||||
@@ -1,3 +1,35 @@
|
||||
RGBLIGHT_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
ENCODER_ENABLE = yes
|
||||
|
||||
@@ -1,42 +0,0 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
ifneq (, $(findstring rev3, $(KEYBOARD)))
|
||||
BOOTLOADER = qmk-dfu
|
||||
else ifneq (, $(findstring rev4, $(KEYBOARD)))
|
||||
BOOTLOADER = qmk-dfu
|
||||
else
|
||||
BOOTLOADER = caterina
|
||||
endif
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
|
||||
DEFAULT_FOLDER = keebio/iris/rev2
|
||||
@@ -4,16 +4,16 @@ Nyquist
|
||||
A split 60% split 5x12 ortholinear keyboard made and sold by Keebio. [More info at Keebio](https://keeb.io).
|
||||
|
||||
Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges)
|
||||
Hardware Supported: Pro Micro
|
||||
Hardware Supported: Pro Micro, ATmega32u4
|
||||
Hardware Availability: [Keebio](https://keeb.io)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make keebio/nyquist/rev2:default
|
||||
make keebio/nyquist/rev3:default
|
||||
|
||||
Example of flashing this keyboard:
|
||||
|
||||
make keebio/nyquist/rev2:default:avrdude
|
||||
make keebio/nyquist/rev3:default:flash
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
||||
|
||||
|
||||
@@ -1 +1,33 @@
|
||||
BACKLIGHT_ENABLE = no
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
LAYOUTS = ortho_5x12 ortho_4x12
|
||||
|
||||
@@ -1 +1,33 @@
|
||||
BACKLIGHT_ENABLE = yes
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
LAYOUTS = ortho_5x12 ortho_4x12
|
||||
|
||||
@@ -1,2 +1,33 @@
|
||||
BACKLIGHT_ENABLE = yes
|
||||
RGBLIGHT_ENABLE = yes
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
LAYOUTS = ortho_5x12 ortho_4x12
|
||||
|
||||
@@ -1,39 +0,0 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
ifneq (, $(findstring rev3, $(KEYBOARD)))
|
||||
BOOTLOADER = qmk-dfu
|
||||
else
|
||||
BOOTLOADER = caterina
|
||||
endif
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
SPLIT_KEYBOARD = yes
|
||||
LAYOUTS = ortho_5x12 ortho_4x12
|
||||
DEFAULT_FOLDER = keebio/nyquist/rev2
|
||||
@@ -9,7 +9,7 @@ MCU = atmega32u4
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel_dfu
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
|
||||
@@ -1,18 +0,0 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
+12
-47
@@ -1,61 +1,26 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu # actually lufa-ms
|
||||
|
||||
# Mass storage bootloader on the tada68 uses bin files
|
||||
FIRMWARE_FORMAT=bin
|
||||
FIRMWARE_FORMAT = bin
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user