mirror of
https://github.com/qmk/qmk_firmware.git
synced 2026-06-24 08:14:01 -04:00
Compare commits
29 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 iKirin
|
b386ccc786 | ||
 skullY
|
0ed492978a | ||
 John Helveston
|
a2c6257942 | ||
 QMK Bot
|
a14c9a057a | ||
 yulei
|
c9838fea12 | ||
 Drashna Jaelre
|
dfe18b40aa | ||
 fauxpark
|
f099142004 | ||
|
Drashna Jaelre
|
d98ed28e7c | ||
 hvp
|
beb9f3ab71 | ||
|
fauxpark
|
77c04d148e | ||
|
fauxpark
|
90c74701aa | ||
|
yulei
|
ede67df6bd | ||
 Manna Harbour
|
27bf464dc3 | ||
|
fauxpark
|
fb02593bd4 | ||
 Callum Oakley
|
c0dbd81b2b | ||
 Nick Brassel
|
385454e602 | ||
|
fauxpark
|
7164e8eeb5 | ||
|
Manna Harbour
|
f9521ffa21 | ||
 Joel Challis
|
2048df8832 | ||
|
Joel Challis
|
99f3321e26 | ||
|
Joel Challis
|
235da6973d | ||
 stanrc85
|
5c41fa6062 | ||
 MechMerlin
|
99a58aa2b8 | ||
 James Young
|
4ae87ab40a | ||
 XScorpion2
|
7e62705877 | ||
 Yan-Fa Li
|
1604f79623 | ||
|
yulei
|
265c415f5e | ||
 heliarmk
|
2b318ba01b | ||
 Stephen Tudor
|
2f3adc3e24 |
@@ -25,6 +25,11 @@ with open(os.path.join(qmk_dir, 'requirements.txt'), 'r') as fd:
|
||||
line = line.split('#')[0]
|
||||
|
||||
module = line.split('=')[0] if '=' in line else line
|
||||
|
||||
if module in ['pep8-naming']:
|
||||
# Not every module is importable by its own name.
|
||||
continue
|
||||
|
||||
if not find_spec(module):
|
||||
print('Could not find module %s!' % module)
|
||||
print('Please run `pip3 install -r requirements.txt` to install the python dependencies.')
|
||||
|
||||
+7
-1
@@ -47,7 +47,7 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
|
||||
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
|
||||
```
|
||||
|
||||
**/etc/udev/rules.d/55-catalina.rules:**
|
||||
**/etc/udev/rules.d/55-caterina.rules:**
|
||||
```
|
||||
# ModemManager should ignore the following devices
|
||||
ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"
|
||||
@@ -69,6 +69,12 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", MODE:="066
|
||||
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"
|
||||
```
|
||||
|
||||
**/etc/udev/rules.d/57-bootloadhid.rules:**
|
||||
```
|
||||
# bootloadHID
|
||||
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", MODE:="0666"
|
||||
```
|
||||
|
||||
### Serial device is not detected in bootloader mode on Linux
|
||||
Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
|
||||
Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
|
||||
|
||||
+14
-10
@@ -173,16 +173,20 @@ As mentioned earlier, the center of the keyboard by default is expected to be `{
|
||||
|
||||
All RGB keycodes are currently shared with the RGBLIGHT system:
|
||||
|
||||
* `RGB_TOG` - toggle
|
||||
* `RGB_MOD` - cycle through modes
|
||||
* `RGB_HUI` - increase hue
|
||||
* `RGB_HUD` - decrease hue
|
||||
* `RGB_SAI` - increase saturation
|
||||
* `RGB_SAD` - decrease saturation
|
||||
* `RGB_VAI` - increase value
|
||||
* `RGB_VAD` - decrease value
|
||||
* `RGB_SPI` - increase speed effect (no EEPROM support)
|
||||
* `RGB_SPD` - decrease speed effect (no EEPROM support)
|
||||
|Key |Aliases |Description |
|
||||
|-------------------|----------|--------------------------------------------------------------------------------------|
|
||||
|`RGB_TOG` | |Toggle RGB lighting on or off |
|
||||
|`RGB_MODE_FORWARD` |`RGB_MOD` |Cycle through modes, reverse direction when Shift is held |
|
||||
|`RGB_MODE_REVERSE` |`RGB_RMOD`|Cycle through modes in reverse, forward direction when Shift is held |
|
||||
|`RGB_HUI` | |Increase hue, decrease hue when Shift is held |
|
||||
|`RGB_HUD` | |Decrease hue, increase hue when Shift is held |
|
||||
|`RGB_SAI` | |Increase saturation, decrease saturation when Shift is held |
|
||||
|`RGB_SAD` | |Decrease saturation, increase saturation when Shift is held |
|
||||
|`RGB_VAI` | |Increase value (brightness), decrease value when Shift is held |
|
||||
|`RGB_VAD` | |Decrease value (brightness), increase value when Shift is held |
|
||||
|`RGB_SPI` | |Increase effect speed (does not support eeprom yet), decrease speed when Shift is held|
|
||||
|`RGB_SPD` | |Decrease effect speed (does not support eeprom yet), increase speed when Shift is held|
|
||||
|
||||
* `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system
|
||||
|
||||
## RGB Matrix Effects
|
||||
|
||||
@@ -48,12 +48,12 @@ Changing the **Value** sets the overall brightness.<br>
|
||||
|`RGB_TOG` | |Toggle RGB lighting on or off |
|
||||
|`RGB_MODE_FORWARD` |`RGB_MOD` |Cycle through modes, reverse direction when Shift is held |
|
||||
|`RGB_MODE_REVERSE` |`RGB_RMOD`|Cycle through modes in reverse, forward direction when Shift is held|
|
||||
|`RGB_HUI` | |Increase hue |
|
||||
|`RGB_HUD` | |Decrease hue |
|
||||
|`RGB_SAI` | |Increase saturation |
|
||||
|`RGB_SAD` | |Decrease saturation |
|
||||
|`RGB_VAI` | |Increase value (brightness) |
|
||||
|`RGB_VAD` | |Decrease value (brightness) |
|
||||
|`RGB_HUI` | |Increase hue, decrease hue when Shift is held |
|
||||
|`RGB_HUD` | |Decrease hue, increase hue when Shift is held |
|
||||
|`RGB_SAI` | |Increase saturation, decrease saturation when Shift is held |
|
||||
|`RGB_SAD` | |Decrease saturation, increase saturation when Shift is held |
|
||||
|`RGB_VAI` | |Increase value (brightness), decrease value when Shift is held |
|
||||
|`RGB_VAD` | |Decrease value (brightness), increase value when Shift is held |
|
||||
|`RGB_MODE_PLAIN` |`RGB_M_P `|Static (no animation) mode |
|
||||
|`RGB_MODE_BREATHE` |`RGB_M_B` |Breathing animation mode |
|
||||
|`RGB_MODE_RAINBOW` |`RGB_M_R` |Rainbow animation mode |
|
||||
|
||||
@@ -13,7 +13,7 @@ General flashing sequence:
|
||||
|
||||
## bootloadHID Flashing Target
|
||||
|
||||
Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
|
||||
?> Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
|
||||
|
||||
To flash via the command line, use the target `:bootloadHID` by executing the following command:
|
||||
|
||||
|
||||
+11
-2
@@ -21,7 +21,7 @@
|
||||
<div id="app"></div>
|
||||
<script>
|
||||
window.$docsify = {
|
||||
alias : {
|
||||
alias: {
|
||||
'/en/(.*)': '/$1',
|
||||
'/en-us/(.*)': '/$1',
|
||||
'/en-gb/(.*)': '/$1',
|
||||
@@ -29,7 +29,16 @@
|
||||
},
|
||||
basePath: '/',
|
||||
name: 'QMK Firmware',
|
||||
nameLink: '/',
|
||||
nameLink: {
|
||||
'/de/': '/#/de/',
|
||||
'/es/': '/#/es/',
|
||||
'/fr-fr/': '/#/fr-fr/',
|
||||
'/he-il/': '/#/he-il/',
|
||||
'/ja/': '/#/ja/',
|
||||
'/ru-ru/': '/#/ru-ru/',
|
||||
'/zh-cn/': '/#/zh-cn/',
|
||||
'/': '/#/'
|
||||
},
|
||||
repo: 'qmk/qmk_firmware',
|
||||
loadSidebar: '_summary.md',
|
||||
loadNavbar: '_langs.md',
|
||||
|
||||
+19
-19
@@ -389,12 +389,12 @@ This is a reference only. Each group of keys links to the page documenting their
|
||||
|`RGB_TOG` | |Toggle RGB lighting on or off |
|
||||
|`RGB_MODE_FORWARD` |`RGB_MOD` |Cycle through modes, reverse direction when Shift is held |
|
||||
|`RGB_MODE_REVERSE` |`RGB_RMOD`|Cycle through modes in reverse, forward direction when Shift is held|
|
||||
|`RGB_HUI` | |Increase hue |
|
||||
|`RGB_HUD` | |Decrease hue |
|
||||
|`RGB_SAI` | |Increase saturation |
|
||||
|`RGB_SAD` | |Decrease saturation |
|
||||
|`RGB_VAI` | |Increase value (brightness) |
|
||||
|`RGB_VAD` | |Decrease value (brightness) |
|
||||
|`RGB_HUI` | |Increase hue, decrease hue when Shift is held |
|
||||
|`RGB_HUD` | |Decrease hue, increase hue when Shift is held |
|
||||
|`RGB_SAI` | |Increase saturation, decrease saturation when Shift is held |
|
||||
|`RGB_SAD` | |Decrease saturation, increase saturation when Shift is held |
|
||||
|`RGB_VAI` | |Increase value (brightness), decrease value when Shift is held |
|
||||
|`RGB_VAD` | |Decrease value (brightness), increase value when Shift is held |
|
||||
|`RGB_MODE_PLAIN` |`RGB_M_P `|Static (no animation) mode |
|
||||
|`RGB_MODE_BREATHE` |`RGB_M_B` |Breathing animation mode |
|
||||
|`RGB_MODE_RAINBOW` |`RGB_M_R` |Rainbow animation mode |
|
||||
@@ -407,19 +407,19 @@ This is a reference only. Each group of keys links to the page documenting their
|
||||
|
||||
## [RGB Matrix Lighting](feature_rgb_matrix.md)
|
||||
|
||||
|Key |Aliases |Description |
|
||||
|-------------------|----------|--------------------------------------------------------------------|
|
||||
|`RGB_TOG` | |Toggle RGB lighting on or off |
|
||||
|`RGB_MODE_FORWARD` |`RGB_MOD` |Cycle through modes, reverse direction when Shift is held |
|
||||
|`RGB_MODE_REVERSE` |`RGB_RMOD`|Cycle through modes in reverse, forward direction when Shift is held|
|
||||
|`RGB_HUI` | |Increase hue |
|
||||
|`RGB_HUD` | |Decrease hue |
|
||||
|`RGB_SAI` | |Increase saturation |
|
||||
|`RGB_SAD` | |Decrease saturation |
|
||||
|`RGB_VAI` | |Increase value (brightness) |
|
||||
|`RGB_VAD` | |Decrease value (brightness) |
|
||||
|`RGB_SPI` | |Increase effect speed (does no support eeprom yet) |
|
||||
|`RGB_SPD` | |Decrease effect speed (does no support eeprom yet) |
|
||||
|Key |Aliases |Description |
|
||||
|-------------------|----------|--------------------------------------------------------------------------------------|
|
||||
|`RGB_TOG` | |Toggle RGB lighting on or off |
|
||||
|`RGB_MODE_FORWARD` |`RGB_MOD` |Cycle through modes, reverse direction when Shift is held |
|
||||
|`RGB_MODE_REVERSE` |`RGB_RMOD`|Cycle through modes in reverse, forward direction when Shift is held |
|
||||
|`RGB_HUI` | |Increase hue, decrease hue when Shift is held |
|
||||
|`RGB_HUD` | |Decrease hue, increase hue when Shift is held |
|
||||
|`RGB_SAI` | |Increase saturation, decrease saturation when Shift is held |
|
||||
|`RGB_SAD` | |Decrease saturation, increase saturation when Shift is held |
|
||||
|`RGB_VAI` | |Increase value (brightness), decrease value when Shift is held |
|
||||
|`RGB_VAD` | |Decrease value (brightness), increase value when Shift is held |
|
||||
|`RGB_SPI` | |Increase effect speed (does not support eeprom yet), decrease speed when Shift is held|
|
||||
|`RGB_SPD` | |Decrease effect speed (does not support eeprom yet), increase speed when Shift is held|
|
||||
|
||||
## [Thermal Printer](feature_thermal_printer.md)
|
||||
|
||||
|
||||
@@ -0,0 +1,123 @@
|
||||
* [Complete Newbs Guide](ru-ru/newbs.md)
|
||||
* [Getting Started](ru-ru/newbs_getting_started.md)
|
||||
* [Building Your First Firmware](ru-ru/newbs_building_firmware.md)
|
||||
* [Flashing Firmware](ru-ru/newbs_flashing.md)
|
||||
* [Testing and Debugging](ru-ru/newbs_testing_debugging.md)
|
||||
* [Git Best Practices](ru-ru/newbs_best_practices.md)
|
||||
* [Learning Resources](ru-ru/newbs_learn_more_resources.md)
|
||||
|
||||
* [QMK Basics](ru-ru/README.md)
|
||||
* [QMK Introduction](ru-ru/getting_started_introduction.md)
|
||||
* [QMK CLI](ru-ru/cli.md)
|
||||
* [QMK CLI Config](ru-ru/cli_configuration.md)
|
||||
* [Contributing to QMK](ru-ru/contributing.md)
|
||||
* [How to Use Github](ru-ru/getting_started_github.md)
|
||||
* [Getting Help](ru-ru/getting_started_getting_help.md)
|
||||
|
||||
* [Breaking Changes](ru-ru/breaking_changes.md)
|
||||
* [2019 Aug 30](ru-ru/ChangeLog/20190830.md)
|
||||
|
||||
* [FAQ](ru-ru/faq.md)
|
||||
* [General FAQ](ru-ru/faq_general.md)
|
||||
* [Build/Compile QMK](ru-ru/faq_build.md)
|
||||
* [Debugging/Troubleshooting QMK](ru-ru/faq_debug.md)
|
||||
* [Keymap](ru-ru/faq_keymap.md)
|
||||
* [Driver Installation with Zadig](ru-ru/driver_installation_zadig.md)
|
||||
|
||||
* Detailed Guides
|
||||
* [Install Build Tools](ru-ru/getting_started_build_tools.md)
|
||||
* [Vagrant Guide](ru-ru/getting_started_vagrant.md)
|
||||
* [Build/Compile Instructions](ru-ru/getting_started_make_guide.md)
|
||||
* [Flashing Firmware](ru-ru/flashing.md)
|
||||
* [Customizing Functionality](ru-ru/custom_quantum_functions.md)
|
||||
* [Keymap Overview](ru-ru/keymap.md)
|
||||
|
||||
* [Hardware](ru-ru/hardware.md)
|
||||
* [Compatible Microcontrollers](ru-ru/compatible_microcontrollers.md)
|
||||
* [AVR Processors](ru-ru/hardware_avr.md)
|
||||
* [Drivers](ru-ru/hardware_drivers.md)
|
||||
|
||||
* Reference
|
||||
* [Keyboard Guidelines](ru-ru/hardware_keyboard_guidelines.md)
|
||||
* [Config Options](ru-ru/config_options.md)
|
||||
* [Keycodes](ru-ru/keycodes.md)
|
||||
* [Coding Conventions - C](ru-ru/coding_conventions_c.md)
|
||||
* [Coding Conventions - Python](ru-ru/coding_conventions_python.md)
|
||||
* [Documentation Best Practices](ru-ru/documentation_best_practices.md)
|
||||
* [Documentation Templates](ru-ru/documentation_templates.md)
|
||||
* [Glossary](ru-ru/reference_glossary.md)
|
||||
* [Unit Testing](ru-ru/unit_testing.md)
|
||||
* [Useful Functions](ru-ru/ref_functions.md)
|
||||
* [Configurator Support](ru-ru/reference_configurator_support.md)
|
||||
* [info.json Format](ru-ru/reference_info_json.md)
|
||||
* [Python CLI Development](ru-ru/cli_development.md)
|
||||
|
||||
* [Features](ru-ru/features.md)
|
||||
* [Basic Keycodes](ru-ru/keycodes_basic.md)
|
||||
* [US ANSI Shifted Keys](ru-ru/keycodes_us_ansi_shifted.md)
|
||||
* [Quantum Keycodes](ru-ru/quantum_keycodes.md)
|
||||
* [Advanced Keycodes](ru-ru/feature_advanced_keycodes.md)
|
||||
* [Audio](ru-ru/feature_audio.md)
|
||||
* [Auto Shift](ru-ru/feature_auto_shift.md)
|
||||
* [Backlight](ru-ru/feature_backlight.md)
|
||||
* [Bluetooth](ru-ru/feature_bluetooth.md)
|
||||
* [Bootmagic](ru-ru/feature_bootmagic.md)
|
||||
* [Combos](ru-ru/feature_combo.md)
|
||||
* [Command](ru-ru/feature_command.md)
|
||||
* [Debounce API](ru-ru/feature_debounce_type.md)
|
||||
* [DIP Switch](ru-ru/feature_dip_switch.md)
|
||||
* [Dynamic Macros](ru-ru/feature_dynamic_macros.md)
|
||||
* [Encoders](ru-ru/feature_encoders.md)
|
||||
* [Grave Escape](ru-ru/feature_grave_esc.md)
|
||||
* [Haptic Feedback](ru-ru/feature_haptic_feedback.md)
|
||||
* [HD44780 LCD Controller](ru-ru/feature_hd44780.md)
|
||||
* [Key Lock](ru-ru/feature_key_lock.md)
|
||||
* [Layouts](ru-ru/feature_layouts.md)
|
||||
* [Leader Key](ru-ru/feature_leader_key.md)
|
||||
* [LED Matrix](ru-ru/feature_led_matrix.md)
|
||||
* [Macros](ru-ru/feature_macros.md)
|
||||
* [Mouse Keys](ru-ru/feature_mouse_keys.md)
|
||||
* [OLED Driver](ru-ru/feature_oled_driver.md)
|
||||
* [One Shot Keys](ru-ru/feature_advanced_keycodes.md#one-shot-keys)
|
||||
* [Pointing Device](ru-ru/feature_pointing_device.md)
|
||||
* [PS/2 Mouse](ru-ru/feature_ps2_mouse.md)
|
||||
* [RGB Lighting](ru-ru/feature_rgblight.md)
|
||||
* [RGB Matrix](ru-ru/feature_rgb_matrix.md)
|
||||
* [Space Cadet](ru-ru/feature_space_cadet.md)
|
||||
* [Split Keyboard](ru-ru/feature_split_keyboard.md)
|
||||
* [Stenography](ru-ru/feature_stenography.md)
|
||||
* [Swap Hands](ru-ru/feature_swap_hands.md)
|
||||
* [Tap Dance](ru-ru/feature_tap_dance.md)
|
||||
* [Terminal](ru-ru/feature_terminal.md)
|
||||
* [Thermal Printer](ru-ru/feature_thermal_printer.md)
|
||||
* [Unicode](ru-ru/feature_unicode.md)
|
||||
* [Userspace](ru-ru/feature_userspace.md)
|
||||
* [Velocikey](ru-ru/feature_velocikey.md)
|
||||
|
||||
* For Makers and Modders
|
||||
* [Hand Wiring Guide](ru-ru/hand_wire.md)
|
||||
* [ISP Flashing Guide](ru-ru/isp_flashing_guide.md)
|
||||
* [ARM Debugging Guide](ru-ru/arm_debugging.md)
|
||||
* [I2C Driver](ru-ru/i2c_driver.md)
|
||||
* [WS2812 Driver](ru-ru/ws2812_driver.md)
|
||||
* [GPIO Controls](ru-ru/internals_gpio_control.md)
|
||||
* [Proton C Conversion](ru-ru/proton_c_conversion.md)
|
||||
|
||||
* For a Deeper Understanding
|
||||
* [How Keyboards Work](ru-ru/how_keyboards_work.md)
|
||||
* [Understanding QMK](ru-ru/understanding_qmk.md)
|
||||
|
||||
* Other Topics
|
||||
* [Using Eclipse with QMK](ru-ru/other_eclipse.md)
|
||||
* [Using VSCode with QMK](ru-ru/other_vscode.md)
|
||||
* [Support](ru-ru/support.md)
|
||||
* [Translating the QMK Docs](ru-ru/translating.md)
|
||||
|
||||
* QMK Internals (In Progress)
|
||||
* [Defines](ru-ru/internals_defines.md)
|
||||
* [Input Callback Reg](ru-ru/internals_input_callback_reg.md)
|
||||
* [Midi Device](ru-ru/internals_midi_device.md)
|
||||
* [Midi Device Setup Process](ru-ru/internals_midi_device_setup_process.md)
|
||||
* [Midi Util](ru-ru/internals_midi_util.md)
|
||||
* [Send Functions](ru-ru/internals_send_functions.md)
|
||||
* [Sysex Tools](ru-ru/internals_sysex_tools.md)
|
||||
@@ -32,6 +32,12 @@ Once you've finished translating a new language, you'll also need to modify the
|
||||
'/zh-cn/': '没有结果!',
|
||||
```
|
||||
|
||||
The `nameLink` object, for setting the "QMK Firmware" heading link in the sidebar, must also be added to:
|
||||
|
||||
```js
|
||||
'/zh-cn/': '/#/zh-cn/',
|
||||
```
|
||||
|
||||
And make sure to add the language folder in the `fallbackLanguages` list, so it will properly fall back to English instead of 404ing:
|
||||
|
||||
```js
|
||||
|
||||
@@ -0,0 +1,17 @@
|
||||
|
||||
// generated from users/manna-harbour_miryoku/miryoku.org
|
||||
|
||||
#pragma once
|
||||
|
||||
#define EE_HANDS
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
|
||||
#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
|
||||
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
||||
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
|
||||
#define RGB_MATRIX_HUE_STEP 8
|
||||
#define RGB_MATRIX_SAT_STEP 8
|
||||
#define RGB_MATRIX_VAL_STEP 8
|
||||
#define RGB_MATRIX_SPD_STEP 10
|
||||
#endif
|
||||
@@ -0,0 +1,4 @@
|
||||
|
||||
# generated from users/manna-harbour_miryoku/miryoku.org
|
||||
|
||||
RGB_MATRIX_ENABLE = WS2812
|
||||
@@ -48,13 +48,13 @@ __attribute__((weak)) bool is_keyboard_left(void) {
|
||||
#elif defined(EE_HANDS)
|
||||
return eeconfig_read_handedness();
|
||||
#elif defined(MASTER_RIGHT)
|
||||
return !is_keyboard_master();
|
||||
return !has_usb();
|
||||
#endif
|
||||
|
||||
return is_keyboard_master();
|
||||
return has_usb();
|
||||
}
|
||||
|
||||
__attribute__((weak)) bool is_keyboard_master(void) {
|
||||
__attribute__((weak)) bool has_usb(void) {
|
||||
static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
|
||||
|
||||
// only check once, as this is called often
|
||||
@@ -103,8 +103,3 @@ void split_keyboard_setup(void) {
|
||||
}
|
||||
sei();
|
||||
}
|
||||
|
||||
// backwards compat
|
||||
bool has_usb(void) {
|
||||
return is_keyboard_master();
|
||||
}
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
#pragma once
|
||||
#define XXX KC_NO
|
||||
#include "quantum.h"
|
||||
#define LAYOUT_HHKB( \
|
||||
#define LAYOUT_60_tsangan_hhkb( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C,\
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,\
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D,\
|
||||
@@ -14,3 +14,5 @@
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \
|
||||
{ K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, K4B, XXX, K4D } \
|
||||
}
|
||||
|
||||
#define LAYOUT_HHKB LAYOUT_60_tsangan_hhkb
|
||||
|
||||
@@ -5,8 +5,8 @@
|
||||
"width": 15,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT_HHKB": {
|
||||
"LAYOUT_60_tsangan_hhkb": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}]
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -5,19 +5,19 @@
|
||||
#define _LAYER3 3
|
||||
#define _LAYER4 4
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_LAYER0] = LAYOUT_HHKB( /* Base */
|
||||
[_LAYER0] = LAYOUT_60_tsangan_hhkb( /* Base */
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||
CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2),
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_RCTL),
|
||||
[_LAYER1] = LAYOUT_HHKB( /* FN */
|
||||
[_LAYER1] = LAYOUT_60_tsangan_hhkb( /* FN */
|
||||
KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,
|
||||
KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,
|
||||
KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, MAGIC_TOGGLE_NKRO, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
[_LAYER2] = LAYOUT_HHKB( /* FN2 */
|
||||
[_LAYER2] = LAYOUT_60_tsangan_hhkb( /* FN2 */
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
@@ -12,3 +12,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
AUDIO_ENABLE = no
|
||||
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
|
||||
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
|
||||
|
||||
LAYOUTS = 60_tsangan_hhkb
|
||||
|
||||
@@ -21,3 +21,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
AUDIO_ENABLE = no
|
||||
RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix
|
||||
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
|
||||
|
||||
LAYOUTS = 60_tsangan_hhkb
|
||||
|
||||
@@ -37,15 +37,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui |Fn |Ctrl |
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Fn |Gui |Ctrl |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_QWERTY] = LAYOUT_60_ansi(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FUNC), KC_RCTL
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FUNC), KC_RGUI, KC_RCTL
|
||||
),
|
||||
|
||||
/* Keymap _COLEMAK: (Base Layer) Default Layer
|
||||
@@ -58,15 +58,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| K| M| ,| .| /|Shift |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui |Fn |Ctrl |
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Fn |Gui |Ctrl |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_COLEMAK] = LAYOUT_60_ansi(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
HPR_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
CTL_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FUNC), KC_RCTL
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FUNC), KC_RGUI, KC_RCTL
|
||||
),
|
||||
|
||||
/* Keymap _DVORAK: (Base Layer) Default Layer
|
||||
@@ -79,35 +79,35 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | ;| Q| J| K| X| B| M| W| V| Z|ShiftEnter|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui |Fn |Ctrl |
|
||||
* |Ctrl|Gui |Alt | Space |Alt |Fn |Gui |Ctrl |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_DVORAK] = LAYOUT_60_ansi(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, \
|
||||
HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_BSPC, \
|
||||
HPR_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSLS, \
|
||||
CTL_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, \
|
||||
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, SFT_ENT, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FUNC), KC_RCTL
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FUNC), KC_RGUI, KC_RCTL
|
||||
),
|
||||
|
||||
/* Keymap _FUNC: Function Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
|
||||
* | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| BL |
|
||||
* |-----------------------------------------------------------|
|
||||
* | |Hom| UP|End| | | |Qwt|Cmk|Dvk| |BL-|BL+|BL |
|
||||
* | |Hom| UP|End| | | |Qwt|Cmk|Dvk| |UP |BL-| BL+ |
|
||||
* |-----------------------------------------------------------|
|
||||
* | |LFT| DN| RT| | |LFT| DN| UP| RT|Vo+|Pg+| |
|
||||
* | |LFT| DN| RT| | | | | |Pg+|LFT|RGT| |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | |Prv|Ply|Nxt| | | |Vo-|Pg-| |
|
||||
* | | | |Prv|Ply|Nxt| | | |Pg-|DN | |
|
||||
* |-----------------------------------------------------------|
|
||||
* |RESET| | | | | | | |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_FUNC] = LAYOUT_60_ansi(
|
||||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
|
||||
_______, KC_HOME, KC_UP, KC_END, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, BL_DEC, BL_INC, BL_TOGG, \
|
||||
_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_VOLU, KC_PGUP, _______, \
|
||||
_______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_VOLD, KC_PGDN, _______, \
|
||||
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, BL_TOGG, \
|
||||
_______, KC_HOME, KC_UP, KC_END, _______, _______, _______, QWERTY, COLEMAK, DVORAK, _______, KC_UP, BL_DEC, BL_INC, \
|
||||
_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_PGUP, KC_LEFT, KC_RGHT, _______, \
|
||||
_______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, KC_PGDN, KC_DOWN, _______, \
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______
|
||||
)
|
||||
};
|
||||
|
||||
@@ -1,10 +1,12 @@
|
||||
#include "jotanck.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void keyboard_pre_init_user() {
|
||||
setPinOutput(JOTANCK_LED1);
|
||||
setPinOutput(JOTANCK_LED2);
|
||||
void keyboard_pre_init_kb() {
|
||||
setPinOutput(JOTANCK_LED1);
|
||||
setPinOutput(JOTANCK_LED2);
|
||||
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
@@ -0,0 +1,49 @@
|
||||
/* Copyright 2019 HELIAR MK
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0xD070
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Heliar
|
||||
#define PRODUCT wm1 hotswap
|
||||
#define DESCRIPTION 69% custom keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D5, D3, B3, F0, E6 }
|
||||
#define MATRIX_COL_PINS { D2, B0, B1, B2, D1, D0, C7, C6, B6, B5, B4, F4, F5, F6, F1 }
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_PIN B7
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
@@ -0,0 +1,81 @@
|
||||
{
|
||||
"keyboard_name": "wm1",
|
||||
"url": "",
|
||||
"maintainer": "heliar",
|
||||
"width": 18.25,
|
||||
"height": 5.25,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label": "k00", "x": 0, "y": 0},
|
||||
{"label": "k01", "x": 1, "y": 0},
|
||||
{"label": "k02", "x": 2, "y": 0},
|
||||
{"label": "k03", "x": 3, "y": 0},
|
||||
{"label": "k04", "x": 4, "y": 0},
|
||||
{"label": "k05", "x": 5, "y": 0},
|
||||
{"label": "k06", "x": 6, "y": 0},
|
||||
{"label": "k07", "x": 9, "y": 0},
|
||||
{"label": "k08", "x": 10, "y": 0},
|
||||
{"label": "k09", "x": 11, "y": 0},
|
||||
{"label": "k0a", "x": 12, "y": 0},
|
||||
{"label": "k0b", "x": 13, "y": 0},
|
||||
{"label": "k0c", "x": 14, "y": 0},
|
||||
{"label": "k0d", "x": 15, "y": 0, "w": 2},
|
||||
{"label": "k0e", "x": 17.25, "y": 0},
|
||||
{"label": "k10", "x": 0, "y": 1, "w": 1.5},
|
||||
{"label": "k11", "x": 1.5, "y": 1},
|
||||
{"label": "k12", "x": 2.5, "y": 1},
|
||||
{"label": "k13", "x": 3.5, "y": 1},
|
||||
{"label": "k14", "x": 4.5, "y": 1},
|
||||
{"label": "k15", "x": 5.5, "y": 1},
|
||||
{"label": "k16", "x": 8.5, "y": 1},
|
||||
{"label": "k17", "x": 9.5, "y": 1},
|
||||
{"label": "k18", "x": 10.5, "y": 1},
|
||||
{"label": "k19", "x": 11.5, "y": 1},
|
||||
{"label": "k1a", "x": 12.5, "y": 1},
|
||||
{"label": "k1b", "x": 13.5, "y": 1},
|
||||
{"label": "k1c", "x": 14.5, "y": 1},
|
||||
{"label": "k1d", "x": 15.5, "y": 1, "w": 1.5},
|
||||
{"label": "k1e", "x": 17.25, "y": 1},
|
||||
{"label": "k20", "x": 0, "y": 2, "w": 1.75},
|
||||
{"label": "k21", "x": 1.75, "y": 2},
|
||||
{"label": "k22", "x": 2.75, "y": 2},
|
||||
{"label": "k23", "x": 3.75, "y": 2},
|
||||
{"label": "k24", "x": 4.75, "y": 2},
|
||||
{"label": "k25", "x": 5.75, "y": 2},
|
||||
{"label": "k26", "x": 8.75, "y": 2},
|
||||
{"label": "k27", "x": 9.75, "y": 2},
|
||||
{"label": "k28", "x": 10.75, "y": 2},
|
||||
{"label": "k29", "x": 11.75, "y": 2},
|
||||
{"label": "k2a", "x": 12.75, "y": 2},
|
||||
{"label": "k2b", "x": 13.75, "y": 2},
|
||||
{"label": "k2d", "x": 14.75, "y": 2, "w": 2.25},
|
||||
{"label": "k2e", "x": 17.25, "y": 2},
|
||||
{"label": "k30", "x": 0, "y": 3, "w": 2.25},
|
||||
{"label": "k31", "x": 2.25, "y": 3},
|
||||
{"label": "k32", "x": 3.25, "y": 3},
|
||||
{"label": "k33", "x": 4.25, "y": 3},
|
||||
{"label": "k34", "x": 5.25, "y": 3},
|
||||
{"label": "k35", "x": 6.25, "y": 3},
|
||||
{"label": "k36", "x": 8.25, "y": 3},
|
||||
{"label": "k37", "x": 9.25, "y": 3},
|
||||
{"label": "k38", "x": 10.25, "y": 3},
|
||||
{"label": "k39", "x": 11.25, "y": 3},
|
||||
{"label": "k3a", "x": 12.25, "y": 3},
|
||||
{"label": "k3b", "x": 13.25, "y": 3},
|
||||
{"label": "k3c", "x": 14.25, "y": 3, "w": 1.75},
|
||||
{"label": "k3d", "x": 16.25, "y": 3.25},
|
||||
{"label": "k40", "x": 0, "y": 4, "w": 1.5},
|
||||
{"label": "k42", "x": 3, "y": 4, "w": 1.5},
|
||||
{"label": "k43", "x": 4.5, "y": 4},
|
||||
{"label": "k44", "x": 5.5, "y": 4, "w": 2},
|
||||
{"label": "k46", "x": 8.25, "y": 4, "w": 2.75},
|
||||
{"label": "k49", "x": 11, "y": 4, "w": 1.5},
|
||||
{"label": "k4b", "x": 13.5, "y": 4, "w": 1.5},
|
||||
{"label": "k4c", "x": 15.25, "y": 4.25},
|
||||
{"label": "k4d", "x": 16.25, "y": 4.25},
|
||||
{"label": "k4e", "x": 17.25, "y": 4.25}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,23 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines names for use in layer keycodes and the keymap
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_BASE] = LAYOUT(
|
||||
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_ESC,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP,
|
||||
KC_LCTL, KC_LALT,KC_LGUI,KC_SPC, LT(_FN,KC_SPC), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT),
|
||||
|
||||
[_FN] = LAYOUT(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
};
|
||||
@@ -0,0 +1,7 @@
|
||||
# The default layout
|
||||
## layer 0 keymap
|
||||
|
||||
## layer 1 keymap
|
||||
|
||||
## The keycap size of layout
|
||||
|
||||
@@ -0,0 +1,19 @@
|
||||
# Wm1 ergonomic Keyboard alternative hotswap PCB
|
||||
### Original Wm1 Keyboard
|
||||
|
||||
### Pcb front side
|
||||
|
||||
### Pcb back side
|
||||
|
||||
|
||||
A ergonomic 68 key keyboard's hotswap-type PCB which is made by heliar and this PCB is compatible with the wm1 keyboard is designed by Hoq.
|
||||
|
||||
* Keyboard Maintainer: [Heliar](https://github.com/heliarmk)
|
||||
* Hardware Supported: Hotswap type
|
||||
* Hardware Availability: [Heliar](https://github.com/heliarmk)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make heliar/wm1_hotswap:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -0,0 +1,31 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
## Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
@@ -0,0 +1,39 @@
|
||||
/* Copyright 2019 HELIAR MK
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "wm1_hotswap.h"
|
||||
|
||||
|
||||
void keyboard_pre_init_kb(void)
|
||||
{
|
||||
setPinOutput(D7);
|
||||
writePinHigh(D7);
|
||||
setPinOutput(D6);
|
||||
writePinHigh(D6);
|
||||
setPinOutput(D4);
|
||||
writePinHigh(D4);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
|
||||
if (led_update_user(led_state)){
|
||||
writePin(D7, !led_state.num_lock);
|
||||
writePin(D6, !led_state.caps_lock);
|
||||
writePin(D4, !led_state.scroll_lock);
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
@@ -0,0 +1,42 @@
|
||||
/* Copyright 2019 HELIAR MK
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define LAYOUT( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K42, K43, K44, K46, K49, K4B, K4C, K4D, K4E \
|
||||
)\
|
||||
{\
|
||||
{K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E}, \
|
||||
{K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E}, \
|
||||
{K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E}, \
|
||||
{K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO},\
|
||||
{K40, KC_NO, K42, K43, K44, KC_NO,K46, KC_NO, KC_NO, K49, KC_NO, K4B, K4C, K4D, K4E} \
|
||||
}
|
||||
@@ -0,0 +1,225 @@
|
||||
/*
|
||||
Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4705
|
||||
#define PRODUCT_ID 0x0143
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Maartenwut
|
||||
#define PRODUCT J-01
|
||||
#define DESCRIPTION A custom 65%ish keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 17
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
|
||||
#define MATRIX_ROW_PINS {B2, B1, B3, B0, D0}
|
||||
#define MATRIX_COL_PINS {D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1}
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||
|
||||
#define BACKLIGHT_PIN B7
|
||||
#define BACKLIGHT_BREATHING
|
||||
#define BACKLIGHT_LEVELS 4
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
/* defined by default; to change, uncomment and set to the combination you want */
|
||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP H
|
||||
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER B
|
||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#ifndef LINK_TIME_OPTIMIZATION_ENABLE
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
#endif
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
/*
|
||||
* HD44780 LCD Display Configuration
|
||||
*/
|
||||
/*
|
||||
#define LCD_LINES 2 //< number of visible lines of the display
|
||||
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||
|
||||
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||
|
||||
#if LCD_IO_MODE
|
||||
#define LCD_PORT PORTB //< port for the LCD lines
|
||||
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||
#define LCD_RS_PIN 3 //< pin for RS line
|
||||
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||
#define LCD_RW_PIN 2 //< pin for RW line
|
||||
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||
#define LCD_E_PIN 1 //< pin for Enable line
|
||||
#endif
|
||||
*/
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
#define BOOTMAGIC_LITE_ROW 0
|
||||
#define BOOTMAGIC_LITE_COLUMN 2
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"keyboard_name": "J01",
|
||||
"url": "",
|
||||
"maintainer": "MechMerlin",
|
||||
"width": 19,
|
||||
"height": 5.25,
|
||||
"layouts": {
|
||||
"LAYOUT_ansi": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":14.5, "y":0}, {"x":15.5, "y":0}, {"x":16.5, "y":0}, {"x":18, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2.5, "y":1, "w":1.5}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":16, "y":1, "w":1.5}, {"x":18, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2.5, "y":2, "w":1.75}, {"x":4.25, "y":2}, {"x":5.25, "y":2}, {"x":6.25, "y":2}, {"x":7.25, "y":2}, {"x":8.25, "y":2}, {"x":9.25, "y":2}, {"x":10.25, "y":2}, {"x":11.25, "y":2}, {"x":12.25, "y":2}, {"x":13.25, "y":2}, {"x":14.25, "y":2}, {"x":15.25, "y":2, "w":2.25}, {"x":18, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2.5, "y":3, "w":2.25}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3}, {"x":14.75, "y":3, "w":1.75}, {"x":16.75, "y":3.25}, {"x":18, "y":3}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":1.25}, {"x":5, "y":4, "w":1.25}, {"x":6.25, "y":4, "w":6.25}, {"x":12.5, "y":4, "w":1.5}, {"x":14, "y":4, "w":1.5}, {"x":15.75, "y":4.25}, {"x":16.75, "y":4.25}, {"x":17.75, "y":4.25}]
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,52 @@
|
||||
/* Copyright Maarten Dekkers <maartenwut@gmail.com>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "j01.h"
|
||||
|
||||
// Optional override functions below.
|
||||
// You can leave any or all of these undefined.
|
||||
// These are only required if you want to perform custom actions.
|
||||
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
setPinOutput(E6);
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
bool led_update_kb(led_t led_state) {
|
||||
if(led_update_user(led_state)) {
|
||||
writePin(E6, !led_state.caps_lock);
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
@@ -0,0 +1,46 @@
|
||||
/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* This is a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
|
||||
#define XXX KC_NO
|
||||
|
||||
#define LAYOUT_ansi( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k1f, k0g, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k2e, k1g, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2f, k2g, \
|
||||
k30, k31, k32, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g, \
|
||||
k42, k43, k44, k48, k4c, k4d, k4e, k4f, k4g \
|
||||
) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g}, \
|
||||
{k30, k31, k32, XXX, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3g}, \
|
||||
{XXX, XXX, k42, k43, k44, XXX, XXX, XXX, k48, XXX, XXX, XXX, k4c, k4d, k4e, k4f, k4g} \
|
||||
}
|
||||
|
||||
@@ -0,0 +1,35 @@
|
||||
/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_ansi(
|
||||
KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_DEL, \
|
||||
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \
|
||||
KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \
|
||||
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
[1] = LAYOUT_ansi(
|
||||
KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, \
|
||||
KC_TRNS, KC_TRNS, BL_BRTG, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
};
|
||||
|
||||
@@ -0,0 +1 @@
|
||||
# The default keymap for j01
|
||||
@@ -0,0 +1,13 @@
|
||||
# J-01
|
||||
|
||||
A 65% with the arrow keys and right most column exploded away, with macro keys on the left hand side. Only 15 manufactured.
|
||||
|
||||
* Keyboard Maintainer: [Maartenwut](https://github.com/maartenwut)
|
||||
* Hardware Supported: J-01 PCB
|
||||
* Hardware Availability: Private Group Buy and [Charity Raffle](https://novelkeys.xyz/collections/frontpage/products/j-01-raffle-ticket)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make jae/j01:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -0,0 +1,32 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||
@@ -7,97 +7,280 @@
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label":"Esc", "x":0, "y":0},
|
||||
{"label":"F1", "x":2, "y":0},
|
||||
{"label":"F2", "x":3, "y":0},
|
||||
{"label":"F3", "x":4, "y":0},
|
||||
{"label":"F4", "x":5, "y":0},
|
||||
{"label":"F5", "x":6.5, "y":0},
|
||||
{"label":"F6", "x":7.5, "y":0},
|
||||
{"label":"F7", "x":8.5, "y":0},
|
||||
{"label":"F8", "x":9.5, "y":0},
|
||||
{"label":"F9", "x":11, "y":0},
|
||||
{"label":"F10", "x":12, "y":0},
|
||||
{"label":"F11", "x":13, "y":0},
|
||||
{"label":"F12", "x":14, "y":0},
|
||||
{"label":"PrtSc", "x":15.25, "y":0},
|
||||
{"label":"Scroll Lock", "x":16.25, "y":0},
|
||||
{"label":"Pause", "x":17.25, "y":0},
|
||||
{"label":"~", "x":0, "y":1.25},
|
||||
{"label":"!", "x":1, "y":1.25},
|
||||
{"label":"@", "x":2, "y":1.25},
|
||||
{"label":"#", "x":3, "y":1.25},
|
||||
{"label":"$", "x":4, "y":1.25},
|
||||
{"label":"%", "x":5, "y":1.25},
|
||||
{"label":"^", "x":6, "y":1.25},
|
||||
{"label":"&", "x":7, "y":1.25},
|
||||
{"label":"*", "x":8, "y":1.25},
|
||||
{"label":"(", "x":9, "y":1.25},
|
||||
{"label":")", "x":10, "y":1.25},
|
||||
{"label":"_", "x":11, "y":1.25},
|
||||
{"label":"+", "x":12, "y":1.25},
|
||||
{"label":"Back Space", "x":13, "y":1.25},
|
||||
{"label":"Delete", "x":14, "y":1.25},
|
||||
{"label":"Insert", "x":15.25, "y":1.25},
|
||||
{"label":"Home", "x":16.25, "y":1.25},
|
||||
{"label":"PgUp", "x":17.25, "y":1.25},
|
||||
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
|
||||
{"label":"Q", "x":1.5, "y":2.25},
|
||||
{"label":"W", "x":2.5, "y":2.25},
|
||||
{"label":"E", "x":3.5, "y":2.25},
|
||||
{"label":"R", "x":4.5, "y":2.25},
|
||||
{"label":"T", "x":5.5, "y":2.25},
|
||||
{"label":"Y", "x":6.5, "y":2.25},
|
||||
{"label":"U", "x":7.5, "y":2.25},
|
||||
{"label":"I", "x":8.5, "y":2.25},
|
||||
{"label":"O", "x":9.5, "y":2.25},
|
||||
{"label":"P", "x":10.5, "y":2.25},
|
||||
{"label":"{", "x":11.5, "y":2.25},
|
||||
{"label":"}", "x":12.5, "y":2.25},
|
||||
{"label":"|", "x":13.5, "y":2.25, "w":1.5},
|
||||
{"label":"Delete", "x":15.25, "y":2.25},
|
||||
{"label":"End", "x":16.25, "y":2.25},
|
||||
{"label":"PgDn", "x":17.25, "y":2.25},
|
||||
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
|
||||
{"label":"A", "x":1.75, "y":3.25},
|
||||
{"label":"S", "x":2.75, "y":3.25},
|
||||
{"label":"D", "x":3.75, "y":3.25},
|
||||
{"label":"F", "x":4.75, "y":3.25},
|
||||
{"label":"G", "x":5.75, "y":3.25},
|
||||
{"label":"H", "x":6.75, "y":3.25},
|
||||
{"label":"J", "x":7.75, "y":3.25},
|
||||
{"label":"K", "x":8.75, "y":3.25},
|
||||
{"label":"L", "x":9.75, "y":3.25},
|
||||
{"label":":", "x":10.75, "y":3.25},
|
||||
{"label":"\"", "x":11.75, "y":3.25},
|
||||
{"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
|
||||
{"label":"Shift", "x":0, "y":4.25, "w":1.25},
|
||||
{"label":"|", "x":1.25, "y":4.25},
|
||||
{"label":"Z", "x":2.25, "y":4.25},
|
||||
{"label":"X", "x":3.25, "y":4.25},
|
||||
{"label":"C", "x":4.25, "y":4.25},
|
||||
{"label":"V", "x":5.25, "y":4.25},
|
||||
{"label":"B", "x":6.25, "y":4.25},
|
||||
{"label":"N", "x":7.25, "y":4.25},
|
||||
{"label":"M", "x":8.25, "y":4.25},
|
||||
{"label":"<", "x":9.25, "y":4.25},
|
||||
{"label":">", "x":10.25, "y":4.25},
|
||||
{"label":"?", "x":11.25, "y":4.25},
|
||||
{"label":"Shift", "x":12.25, "y":4.25, "w":1.75},
|
||||
{"label":"Fn", "x":14, "y":4.25},
|
||||
{"label":"\u2191", "x":16.25, "y":4.25},
|
||||
{"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
|
||||
{"label":"Win", "x":1.25, "y":5.25, "w":1.25},
|
||||
{"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
|
||||
{"x":3.75, "y":5.25, "w":6.25},
|
||||
{"label":"Alt", "x":10, "y":5.25, "w":1.25},
|
||||
{"label":"Win", "x":11.25, "y":5.25, "w":1.25},
|
||||
{"label":"Menu", "x":12.5, "y":5.25, "w":1.25},
|
||||
{"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25},
|
||||
{"label":"\u2190", "x":15.25, "y":5.25},
|
||||
{"label":"\u2193", "x":16.25, "y":5.25},
|
||||
{"label":"\u2192", "x":17.25, "y":5.25}
|
||||
]
|
||||
{"label":"Esc", "x":0, "y":0},
|
||||
{"label":"F1", "x":2, "y":0},
|
||||
{"label":"F2", "x":3, "y":0},
|
||||
{"label":"F3", "x":4, "y":0},
|
||||
{"label":"F4", "x":5, "y":0},
|
||||
{"label":"F5", "x":6.5, "y":0},
|
||||
{"label":"F6", "x":7.5, "y":0},
|
||||
{"label":"F7", "x":8.5, "y":0},
|
||||
{"label":"F8", "x":9.5, "y":0},
|
||||
{"label":"F9", "x":11, "y":0},
|
||||
{"label":"F10", "x":12, "y":0},
|
||||
{"label":"F11", "x":13, "y":0},
|
||||
{"label":"F12", "x":14, "y":0},
|
||||
{"label":"PrtSc", "x":15.25, "y":0},
|
||||
{"label":"Scroll Lock", "x":16.25, "y":0},
|
||||
{"label":"Pause", "x":17.25, "y":0},
|
||||
{"label":"~", "x":0, "y":1.25},
|
||||
{"label":"!", "x":1, "y":1.25},
|
||||
{"label":"@", "x":2, "y":1.25},
|
||||
{"label":"#", "x":3, "y":1.25},
|
||||
{"label":"$", "x":4, "y":1.25},
|
||||
{"label":"%", "x":5, "y":1.25},
|
||||
{"label":"^", "x":6, "y":1.25},
|
||||
{"label":"&", "x":7, "y":1.25},
|
||||
{"label":"*", "x":8, "y":1.25},
|
||||
{"label":"(", "x":9, "y":1.25},
|
||||
{"label":")", "x":10, "y":1.25},
|
||||
{"label":"_", "x":11, "y":1.25},
|
||||
{"label":"+", "x":12, "y":1.25},
|
||||
{"label":"Back Space", "x":13, "y":1.25},
|
||||
{"label":"Delete", "x":14, "y":1.25},
|
||||
{"label":"Insert", "x":15.25, "y":1.25},
|
||||
{"label":"Home", "x":16.25, "y":1.25},
|
||||
{"label":"PgUp", "x":17.25, "y":1.25},
|
||||
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
|
||||
{"label":"Q", "x":1.5, "y":2.25},
|
||||
{"label":"W", "x":2.5, "y":2.25},
|
||||
{"label":"E", "x":3.5, "y":2.25},
|
||||
{"label":"R", "x":4.5, "y":2.25},
|
||||
{"label":"T", "x":5.5, "y":2.25},
|
||||
{"label":"Y", "x":6.5, "y":2.25},
|
||||
{"label":"U", "x":7.5, "y":2.25},
|
||||
{"label":"I", "x":8.5, "y":2.25},
|
||||
{"label":"O", "x":9.5, "y":2.25},
|
||||
{"label":"P", "x":10.5, "y":2.25},
|
||||
{"label":"{", "x":11.5, "y":2.25},
|
||||
{"label":"}", "x":12.5, "y":2.25},
|
||||
{"label":"|", "x":13.5, "y":2.25, "w":1.5},
|
||||
{"label":"Delete", "x":15.25, "y":2.25},
|
||||
{"label":"End", "x":16.25, "y":2.25},
|
||||
{"label":"PgDn", "x":17.25, "y":2.25},
|
||||
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
|
||||
{"label":"A", "x":1.75, "y":3.25},
|
||||
{"label":"S", "x":2.75, "y":3.25},
|
||||
{"label":"D", "x":3.75, "y":3.25},
|
||||
{"label":"F", "x":4.75, "y":3.25},
|
||||
{"label":"G", "x":5.75, "y":3.25},
|
||||
{"label":"H", "x":6.75, "y":3.25},
|
||||
{"label":"J", "x":7.75, "y":3.25},
|
||||
{"label":"K", "x":8.75, "y":3.25},
|
||||
{"label":"L", "x":9.75, "y":3.25},
|
||||
{"label":":", "x":10.75, "y":3.25},
|
||||
{"label":"\"", "x":11.75, "y":3.25},
|
||||
{"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
|
||||
{"label":"Shift", "x":0, "y":4.25, "w":1.25},
|
||||
{"label":"|", "x":1.25, "y":4.25},
|
||||
{"label":"Z", "x":2.25, "y":4.25},
|
||||
{"label":"X", "x":3.25, "y":4.25},
|
||||
{"label":"C", "x":4.25, "y":4.25},
|
||||
{"label":"V", "x":5.25, "y":4.25},
|
||||
{"label":"B", "x":6.25, "y":4.25},
|
||||
{"label":"N", "x":7.25, "y":4.25},
|
||||
{"label":"M", "x":8.25, "y":4.25},
|
||||
{"label":"<", "x":9.25, "y":4.25},
|
||||
{"label":">", "x":10.25, "y":4.25},
|
||||
{"label":"?", "x":11.25, "y":4.25},
|
||||
{"label":"Shift", "x":12.25, "y":4.25, "w":1.75},
|
||||
{"label":"Fn", "x":14, "y":4.25},
|
||||
{"label":"\u2191", "x":16.25, "y":4.25},
|
||||
{"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
|
||||
{"label":"Win", "x":1.25, "y":5.25, "w":1.25},
|
||||
{"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
|
||||
{"x":3.75, "y":5.25, "w":6.25},
|
||||
{"label":"Alt", "x":10, "y":5.25, "w":1.25},
|
||||
{"label":"Win", "x":11.25, "y":5.25, "w":1.25},
|
||||
{"label":"Menu", "x":12.5, "y":5.25, "w":1.25},
|
||||
{"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25},
|
||||
{"label":"\u2190", "x":15.25, "y":5.25},
|
||||
{"label":"\u2193", "x":16.25, "y":5.25},
|
||||
{"label":"\u2192", "x":17.25, "y":5.25}
|
||||
]
|
||||
},
|
||||
"LAYOUT_tkl_ansi": {
|
||||
"layout": [
|
||||
{"label":"Esc", "x":0, "y":0},
|
||||
{"label":"F1", "x":2, "y":0},
|
||||
{"label":"F2", "x":3, "y":0},
|
||||
{"label":"F3", "x":4, "y":0},
|
||||
{"label":"F4", "x":5, "y":0},
|
||||
{"label":"F5", "x":6.5, "y":0},
|
||||
{"label":"F6", "x":7.5, "y":0},
|
||||
{"label":"F7", "x":8.5, "y":0},
|
||||
{"label":"F8", "x":9.5, "y":0},
|
||||
{"label":"F9", "x":11, "y":0},
|
||||
{"label":"F10", "x":12, "y":0},
|
||||
{"label":"F11", "x":13, "y":0},
|
||||
{"label":"F12", "x":14, "y":0},
|
||||
{"label":"PrtSc", "x":15.25, "y":0},
|
||||
{"label":"Scroll Lock", "x":16.25, "y":0},
|
||||
{"label":"Pause", "x":17.25, "y":0},
|
||||
{"label":"~", "x":0, "y":1.25},
|
||||
{"label":"!", "x":1, "y":1.25},
|
||||
{"label":"@", "x":2, "y":1.25},
|
||||
{"label":"#", "x":3, "y":1.25},
|
||||
{"label":"$", "x":4, "y":1.25},
|
||||
{"label":"%", "x":5, "y":1.25},
|
||||
{"label":"^", "x":6, "y":1.25},
|
||||
{"label":"&", "x":7, "y":1.25},
|
||||
{"label":"*", "x":8, "y":1.25},
|
||||
{"label":"(", "x":9, "y":1.25},
|
||||
{"label":")", "x":10, "y":1.25},
|
||||
{"label":"_", "x":11, "y":1.25},
|
||||
{"label":"+", "x":12, "y":1.25},
|
||||
{"label":"Backspace", "x":13, "y":1.25, "w":2},
|
||||
{"label":"Insert", "x":15.25, "y":1.25},
|
||||
{"label":"Home", "x":16.25, "y":1.25},
|
||||
{"label":"PgUp", "x":17.25, "y":1.25},
|
||||
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
|
||||
{"label":"Q", "x":1.5, "y":2.25},
|
||||
{"label":"W", "x":2.5, "y":2.25},
|
||||
{"label":"E", "x":3.5, "y":2.25},
|
||||
{"label":"R", "x":4.5, "y":2.25},
|
||||
{"label":"T", "x":5.5, "y":2.25},
|
||||
{"label":"Y", "x":6.5, "y":2.25},
|
||||
{"label":"U", "x":7.5, "y":2.25},
|
||||
{"label":"I", "x":8.5, "y":2.25},
|
||||
{"label":"O", "x":9.5, "y":2.25},
|
||||
{"label":"P", "x":10.5, "y":2.25},
|
||||
{"label":"{", "x":11.5, "y":2.25},
|
||||
{"label":"}", "x":12.5, "y":2.25},
|
||||
{"label":"|", "x":13.5, "y":2.25, "w":1.5},
|
||||
{"label":"Delete", "x":15.25, "y":2.25},
|
||||
{"label":"End", "x":16.25, "y":2.25},
|
||||
{"label":"PgDn", "x":17.25, "y":2.25},
|
||||
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
|
||||
{"label":"A", "x":1.75, "y":3.25},
|
||||
{"label":"S", "x":2.75, "y":3.25},
|
||||
{"label":"D", "x":3.75, "y":3.25},
|
||||
{"label":"F", "x":4.75, "y":3.25},
|
||||
{"label":"G", "x":5.75, "y":3.25},
|
||||
{"label":"H", "x":6.75, "y":3.25},
|
||||
{"label":"J", "x":7.75, "y":3.25},
|
||||
{"label":"K", "x":8.75, "y":3.25},
|
||||
{"label":"L", "x":9.75, "y":3.25},
|
||||
{"label":":", "x":10.75, "y":3.25},
|
||||
{"label":"\"", "x":11.75, "y":3.25},
|
||||
{"label":"Enter", "x":12.75, "y":3.25, "w":2.25},
|
||||
{"label":"Shift", "x":0, "y":4.25, "w":2.25},
|
||||
{"label":"Z", "x":2.25, "y":4.25},
|
||||
{"label":"X", "x":3.25, "y":4.25},
|
||||
{"label":"C", "x":4.25, "y":4.25},
|
||||
{"label":"V", "x":5.25, "y":4.25},
|
||||
{"label":"B", "x":6.25, "y":4.25},
|
||||
{"label":"N", "x":7.25, "y":4.25},
|
||||
{"label":"M", "x":8.25, "y":4.25},
|
||||
{"label":"<", "x":9.25, "y":4.25},
|
||||
{"label":">", "x":10.25, "y":4.25},
|
||||
{"label":"?", "x":11.25, "y":4.25},
|
||||
{"label":"Shift", "x":12.25, "y":4.25, "w":2.75},
|
||||
{"label":"Up", "x":16.25, "y":4.25},
|
||||
{"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
|
||||
{"label":"GUI", "x":1.25, "y":5.25, "w":1.25},
|
||||
{"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
|
||||
{"label":"Space", "x":3.75, "y":5.25, "w":6.25},
|
||||
{"label":"Alt", "x":10, "y":5.25, "w":1.25},
|
||||
{"label":"GUI", "x":11.25, "y":5.25, "w":1.25},
|
||||
{"label":"Menu", "x":12.5, "y":5.25, "w":1.25},
|
||||
{"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25},
|
||||
{"label":"Left", "x":15.25, "y":5.25},
|
||||
{"label":"Down", "x":16.25, "y":5.25},
|
||||
{"label":"Right", "x":17.25, "y":5.25}
|
||||
]
|
||||
},
|
||||
"LAYOUT_tkl_iso": {
|
||||
"layout": [
|
||||
{"label":"Esc", "x":0, "y":0},
|
||||
{"label":"F1", "x":2, "y":0},
|
||||
{"label":"F2", "x":3, "y":0},
|
||||
{"label":"F3", "x":4, "y":0},
|
||||
{"label":"F4", "x":5, "y":0},
|
||||
{"label":"F5", "x":6.5, "y":0},
|
||||
{"label":"F6", "x":7.5, "y":0},
|
||||
{"label":"F7", "x":8.5, "y":0},
|
||||
{"label":"F8", "x":9.5, "y":0},
|
||||
{"label":"F9", "x":11, "y":0},
|
||||
{"label":"F10", "x":12, "y":0},
|
||||
{"label":"F11", "x":13, "y":0},
|
||||
{"label":"F12", "x":14, "y":0},
|
||||
{"label":"PrtSc", "x":15.25, "y":0},
|
||||
{"label":"Scroll Lock", "x":16.25, "y":0},
|
||||
{"label":"Pause", "x":17.25, "y":0},
|
||||
{"label":"\u00ac", "x":0, "y":1.25},
|
||||
{"label":"!", "x":1, "y":1.25},
|
||||
{"label":"\"", "x":2, "y":1.25},
|
||||
{"label":"\u00a3", "x":3, "y":1.25},
|
||||
{"label":"$", "x":4, "y":1.25},
|
||||
{"label":"%", "x":5, "y":1.25},
|
||||
{"label":"^", "x":6, "y":1.25},
|
||||
{"label":"&", "x":7, "y":1.25},
|
||||
{"label":"*", "x":8, "y":1.25},
|
||||
{"label":"(", "x":9, "y":1.25},
|
||||
{"label":")", "x":10, "y":1.25},
|
||||
{"label":"_", "x":11, "y":1.25},
|
||||
{"label":"+", "x":12, "y":1.25},
|
||||
{"label":"Backspace", "x":13, "y":1.25, "w":2},
|
||||
{"label":"Insert", "x":15.25, "y":1.25},
|
||||
{"label":"Home", "x":16.25, "y":1.25},
|
||||
{"label":"PgUp", "x":17.25, "y":1.25},
|
||||
{"label":"Tab", "x":0, "y":2.25, "w":1.5},
|
||||
{"label":"Q", "x":1.5, "y":2.25},
|
||||
{"label":"W", "x":2.5, "y":2.25},
|
||||
{"label":"E", "x":3.5, "y":2.25},
|
||||
{"label":"R", "x":4.5, "y":2.25},
|
||||
{"label":"T", "x":5.5, "y":2.25},
|
||||
{"label":"Y", "x":6.5, "y":2.25},
|
||||
{"label":"U", "x":7.5, "y":2.25},
|
||||
{"label":"I", "x":8.5, "y":2.25},
|
||||
{"label":"O", "x":9.5, "y":2.25},
|
||||
{"label":"P", "x":10.5, "y":2.25},
|
||||
{"label":"{", "x":11.5, "y":2.25},
|
||||
{"label":"}", "x":12.5, "y":2.25},
|
||||
{"label":"Delete", "x":15.25, "y":2.25},
|
||||
{"label":"End", "x":16.25, "y":2.25},
|
||||
{"label":"PgDn", "x":17.25, "y":2.25},
|
||||
{"label":"Caps Lock", "x":0, "y":3.25, "w":1.75},
|
||||
{"label":"A", "x":1.75, "y":3.25},
|
||||
{"label":"S", "x":2.75, "y":3.25},
|
||||
{"label":"D", "x":3.75, "y":3.25},
|
||||
{"label":"F", "x":4.75, "y":3.25},
|
||||
{"label":"G", "x":5.75, "y":3.25},
|
||||
{"label":"H", "x":6.75, "y":3.25},
|
||||
{"label":"J", "x":7.75, "y":3.25},
|
||||
{"label":"K", "x":8.75, "y":3.25},
|
||||
{"label":"L", "x":9.75, "y":3.25},
|
||||
{"label":":", "x":10.75, "y":3.25},
|
||||
{"label":"@", "x":11.75, "y":3.25},
|
||||
{"label":"~", "x":12.75, "y":3.25},
|
||||
{"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2},
|
||||
{"label":"Shift", "x":0, "y":4.25, "w":1.25},
|
||||
{"label":"|", "x":1.25, "y":4.25},
|
||||
{"label":"Z", "x":2.25, "y":4.25},
|
||||
{"label":"X", "x":3.25, "y":4.25},
|
||||
{"label":"C", "x":4.25, "y":4.25},
|
||||
{"label":"V", "x":5.25, "y":4.25},
|
||||
{"label":"B", "x":6.25, "y":4.25},
|
||||
{"label":"N", "x":7.25, "y":4.25},
|
||||
{"label":"M", "x":8.25, "y":4.25},
|
||||
{"label":"<", "x":9.25, "y":4.25},
|
||||
{"label":">", "x":10.25, "y":4.25},
|
||||
{"label":"?", "x":11.25, "y":4.25},
|
||||
{"label":"Shift", "x":12.25, "y":4.25, "w":2.75},
|
||||
{"label":"Up", "x":16.25, "y":4.25},
|
||||
{"label":"Ctrl", "x":0, "y":5.25, "w":1.25},
|
||||
{"label":"GUI", "x":1.25, "y":5.25, "w":1.25},
|
||||
{"label":"Alt", "x":2.5, "y":5.25, "w":1.25},
|
||||
{"label":"Space", "x":3.75, "y":5.25, "w":6.25},
|
||||
{"label":"AltGr", "x":10, "y":5.25, "w":1.25},
|
||||
{"label":"GUI", "x":11.25, "y":5.25, "w":1.25},
|
||||
{"label":"Menu", "x":12.5, "y":5.25, "w":1.25},
|
||||
{"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25},
|
||||
{"label":"Left", "x":15.25, "y":5.25},
|
||||
{"label":"Down", "x":16.25, "y":5.25},
|
||||
{"label":"Right", "x":17.25, "y":5.25}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -48,4 +48,48 @@
|
||||
{ K110, KC_NO, KC_NO, KC_NO, KC_NO, K115, K116, K117, KC_NO } \
|
||||
}
|
||||
|
||||
#define LAYOUT_tkl_ansi( \
|
||||
K000, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \
|
||||
K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027, K037, K028, \
|
||||
K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K047, K057, K048, \
|
||||
K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K076, \
|
||||
K080, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K097, \
|
||||
K100, K110, K101, K103, K105, K115, K106, K116, K107, K117, K108 \
|
||||
) \
|
||||
{ \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \
|
||||
{ KC_NO, K011, K012, K013, K014, K015, K016, K017, KC_NO }, \
|
||||
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \
|
||||
{ K030, K031, K032, K033, K034, K035, K036, K037, KC_NO }, \
|
||||
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \
|
||||
{ K050, K051, K052, K053, K054, K055, K056, K057, KC_NO }, \
|
||||
{ K060, K061, K062, K063, K064, K065, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K070, K071, K072, K073, K074, K075, K076, KC_NO, KC_NO }, \
|
||||
{ K080, K081, K082, K083, K084, K085, K086, KC_NO, KC_NO }, \
|
||||
{ KC_NO, K091, K092, K093, K094, K095, KC_NO, K097, KC_NO }, \
|
||||
{ K100, K101, KC_NO, K103, KC_NO, K105, K106, K107, K108 }, \
|
||||
{ K110, KC_NO, KC_NO, KC_NO, KC_NO, K115, K116, K117, KC_NO } \
|
||||
}
|
||||
|
||||
#define LAYOUT_tkl_iso( \
|
||||
K000, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \
|
||||
K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K027, K037, K028, \
|
||||
K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K047, K057, K048, \
|
||||
K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K056, K076, \
|
||||
K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K097, \
|
||||
K100, K110, K101, K103, K105, K115, K106, K116, K107, K117, K108 \
|
||||
) \
|
||||
{ \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \
|
||||
{ KC_NO, K011, K012, K013, K014, K015, K016, K017, KC_NO }, \
|
||||
{ K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \
|
||||
{ K030, K031, K032, K033, K034, K035, K036, K037, KC_NO }, \
|
||||
{ K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \
|
||||
{ K050, K051, K052, K053, K054, K055, K056, K057, KC_NO }, \
|
||||
{ K060, K061, K062, K063, K064, K065, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K070, K071, K072, K073, K074, K075, K076, KC_NO, KC_NO }, \
|
||||
{ K080, K081, K082, K083, K084, K085, K086, KC_NO, KC_NO }, \
|
||||
{ K090, K091, K092, K093, K094, K095, KC_NO, K097, KC_NO }, \
|
||||
{ K100, K101, KC_NO, K103, KC_NO, K105, K106, K107, K108 }, \
|
||||
{ K110, KC_NO, KC_NO, KC_NO, KC_NO, K115, K116, K117, KC_NO } \
|
||||
}
|
||||
|
||||
@@ -1,44 +0,0 @@
|
||||
/* Copyright 2019 Ryota Goto
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT( /* Base */
|
||||
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
|
||||
),
|
||||
};
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
return true;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
@@ -1,3 +0,0 @@
|
||||
# The ANSI 6.25U keymap for KBD8X MKII
|
||||
|
||||
A typical setup for the 1.25/6.25U bottom row.
|
||||
@@ -0,0 +1,27 @@
|
||||
/* Copyright 2019 Ryota Goto
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_tkl_ansi( /* Base */
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
|
||||
),
|
||||
};
|
||||
@@ -0,0 +1,3 @@
|
||||
# The ANSI 6.25U keymap for KBD8X MKII
|
||||
|
||||
A typical ANSI setup for the 1.25/6.25U bottom row.
|
||||
@@ -0,0 +1,27 @@
|
||||
/* Copyright 2019 Ryota Goto
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_tkl_iso( /* Base */
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
|
||||
),
|
||||
};
|
||||
@@ -0,0 +1,3 @@
|
||||
# The ISO 6.25U keymap for KBD8X MKII
|
||||
|
||||
A typical ISO setup for the 1.25/6.25U bottom row.
|
||||
@@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
@@ -25,9 +25,11 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||
MIDI_ENABLE = no # MIDI support
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||
|
||||
LAYOUTS = tkl_ansi tkl_iso
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
# jhelvy Keymap for [Iris Rev 2](https://docs.keeb.io/iris-build-guide/)
|
||||
|
||||
## Keymap
|
||||
|
||||
This is a custom keymap with the following layout:
|
||||
|
||||
<img src="https://github.com/jhelvy/qmkJsonConverter/raw/master/keymaps/keebio_iris_rev2_jhelvy.png" width="800">
|
||||
@@ -0,0 +1,33 @@
|
||||
/*
|
||||
Copyright 2017 Danny Nguyen <danny@keeb.io>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// #define USE_I2C
|
||||
#define EE_HANDS
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 12
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#define TAPPING_FORCE_HOLD
|
||||
#undef TAPPING_TERM
|
||||
#define TAPPING_TERM 200
|
||||
#define AUTO_SHIFT_TIMEOUT 150
|
||||
@@ -0,0 +1,54 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
LOWER,
|
||||
RAISE,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = LAYOUT( \
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, \
|
||||
KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, \
|
||||
KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_NO, KC_NO, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, \
|
||||
LALT(KC_A),KC_LGUI, MO(1), KC_SPC, MO(2), KC_PGDN),
|
||||
|
||||
[_LOWER] = LAYOUT( \
|
||||
KC_ESC,LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5), KC_SCLN, KC_PIPE, KC_COLN,LCTL(KC_9),LCTL(KC_0), KC_F12, \
|
||||
LCTL(KC_TAB),LGUI(KC_Q),LGUI(KC_W), KC_ESC,LGUI(KC_R),LGUI(KC_T), LCTL(KC_Y),LGUI(KC_LEFT), KC_UP,LGUI(KC_RGHT), KC_TILD, KC_F11, \
|
||||
LGUI(KC_BSPC),MO(2),LGUI(KC_S),LGUI(KC_C),LGUI(KC_V),LGUI(KC_X), KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_GRV, KC_ENT, \
|
||||
KC_F15,LGUI(KC_A),LGUI(KC_D), KC_F13,LGUI(KC_Z),LGUI(KC_Y), KC_NO, KC_NO,KC_BSPC,LGUI(KC_F), SGUI(KC_G),LGUI(KC_G), KC_BSLS, KC_F23, \
|
||||
KC_LALT,KC_LGUI, KC_TRNS, KC_SPC,KC_RGUI, KC_PGUP),
|
||||
|
||||
[_RAISE] = LAYOUT( \
|
||||
KC_VOLU,LGUI(LALT(KC_1)),LGUI(LALT(KC_2)), KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PLUS, \
|
||||
KC_VOLD, KC_NO, KC_NO, KC_NO,SGUI(KC_R), KC_F14, SGUI(KC_K),SGUI(KC_LEFT),LSFT(KC_UP),SGUI(KC_RGHT), KC_F18, KC_UNDS, \
|
||||
KC_MUTE,KC_TRNS, KC_NO, KC_LBRC, KC_RBRC, KC_TAB, KC_F21,LSFT(KC_LEFT),LSFT(KC_DOWN),LSFT(KC_RGHT), KC_F20, KC_F16, \
|
||||
KC_LSPO,KC_ASTG, KC_NO, KC_LCBR, KC_RCBR,LCTL(KC_U), KC_NO, KC_NO,KC_F22,LCTL(LGUI(KC_A)),LALT(LSFT(KC_LEFT)),LALT(LSFT(KC_RIGHT)), KC_F17, KC_F19, \
|
||||
KC_CAPS,LALT(KC_SPC), KC_LGUI, KC_SPC,KC_TRNS, KC_NO)
|
||||
|
||||
};
|
||||
|
||||
void encoder_update_user(uint8_t index, bool clockwise) {
|
||||
if (index == 0) {
|
||||
if (clockwise) {
|
||||
tap_code(KC_VOLU);
|
||||
} else {
|
||||
tap_code(KC_VOLD);
|
||||
}
|
||||
}
|
||||
else if (index == 1) {
|
||||
if (clockwise) {
|
||||
tap_code(KC_PGDN);
|
||||
} else {
|
||||
tap_code(KC_PGUP);
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,3 @@
|
||||
AUTO_SHIFT_ENABLE = yes # Autoshift by holding down a key
|
||||
RGBLIGHT_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = yes
|
||||
@@ -78,14 +78,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#ifdef USE_Link_Time_Optimization
|
||||
// LTO has issues with macros (action_get_macro) and "functions" (fn_actions),
|
||||
// so just disable them
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
|
||||
#define DISABLE_LEADER
|
||||
#endif // USE_Link_Time_Optimization
|
||||
|
||||
@@ -2,4 +2,4 @@ BACKLIGHT_ENABLE = no
|
||||
AUDIO_ENABLE = yes
|
||||
RGBLIGHT_ENABLE = yes #Don't enable this along with I2C
|
||||
|
||||
EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
|
||||
LTO_ENABLE = yes
|
||||
|
||||
@@ -0,0 +1,7 @@
|
||||
# jhelvy Keymap for [Lily58 Pro](https://github.com/kata0510/Lily58)
|
||||
|
||||
## Keymap
|
||||
|
||||
This is a custom keymap with the following layout:
|
||||
|
||||
<img src="https://github.com/jhelvy/qmkJsonConverter/raw/master/keymaps/lily58_rev1_jhelvy.png" width="800">
|
||||
@@ -0,0 +1,55 @@
|
||||
/*
|
||||
This is the c configuration file for the keymap
|
||||
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2015 Jack Humbert
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
//#define USE_MATRIX_I2C
|
||||
|
||||
/* Select hand configuration */
|
||||
|
||||
#define MASTER_LEFT
|
||||
// #define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#define SSD1306OLED
|
||||
|
||||
#define USE_SERIAL_PD2
|
||||
|
||||
#define TAPPING_FORCE_HOLD
|
||||
#undef TAPPING_TERM
|
||||
#define TAPPING_TERM 200
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 27
|
||||
#define RGBLIGHT_LIMIT_VAL 120
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
||||
#define AUTO_SHIFT_TIMEOUT 150
|
||||
|
||||
// Underglow
|
||||
/*
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLED_NUM 14 // Number of LEDs
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLIGHT_SLEEP
|
||||
*/
|
||||
@@ -0,0 +1,112 @@
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#ifdef PROTOCOL_LUFA
|
||||
#include "lufa.h"
|
||||
#include "split_util.h"
|
||||
#endif
|
||||
#ifdef SSD1306OLED
|
||||
#include "ssd1306.h"
|
||||
#endif
|
||||
|
||||
|
||||
extern uint8_t is_master;
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _UPPER 2
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
LOWER,
|
||||
UPPER,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = LAYOUT( \
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, \
|
||||
KC_BSPC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, \
|
||||
KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, \
|
||||
LALT(KC_A), KC_LCTL,KC_LGUI, MO(1), KC_SPC, MO(2), KC_PGDN, KC_NO),
|
||||
|
||||
[_LOWER] = LAYOUT( \
|
||||
KC_ESC,LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5), KC_SCLN,LSFT(KC_BSLS), KC_NO,LCTL(KC_9),LCTL(KC_0), KC_F12, \
|
||||
LCTL(KC_TAB),LGUI(KC_Q),LGUI(KC_W), KC_ESC,LGUI(KC_R),LGUI(KC_T), LCTL(KC_Y),LGUI(KC_LEFT), KC_UP,LGUI(KC_RGHT),LSFT(KC_GRV), KC_F11, \
|
||||
LGUI(KC_BSPC),MO(2),LGUI(KC_S),LGUI(KC_C),LGUI(KC_V),LGUI(KC_X), KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_GRV,LSFT(KC_SCLN), \
|
||||
KC_F15,LGUI(KC_A),LGUI(KC_D), KC_F13,LGUI(KC_Z),LGUI(KC_Y),LSFT(KC_LBRC),LSFT(KC_RBRC),KC_BSPC,LGUI(KC_F), SGUI(KC_G),LGUI(KC_G), KC_BSLS, KC_F23, \
|
||||
KC_NO, KC_NO,KC_NO,KC_TRNS, KC_NO, KC_RGUI, KC_PGUP, KC_NO),
|
||||
|
||||
[_UPPER] = LAYOUT( \
|
||||
KC__VOLUP,LGUI(LALT(KC_1)),LGUI(LALT(KC_2)), KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,LSFT(KC_EQL), \
|
||||
KC_VOLD, KC_NO, KC_NO, KC_NO,SGUI(KC_R), KC_F14, SGUI(KC_K),SGUI(KC_LEFT),LSFT(KC_UP),SGUI(KC_RGHT), KC_F18,LSFT(KC_MINS), \
|
||||
KC_MUTE,KC_TRNS, KC_NO, KC_LGUI, KC_TAB, KC_F21, KC_NO,LSFT(KC_LEFT),LSFT(KC_DOWN),LSFT(KC_RGHT), KC_F20, KC_F16, \
|
||||
KC_ASTG, KC_NO, KC_NO, KC_NO, KC_F22,LCTL(KC_U),LGUI(KC_LBRC),LGUI(KC_RBRC),LGUI(KC_N), KC_NO,LALT(LSFT(KC_LEFT)),LALT(LSFT(KC_RIGHT)), KC_F17, KC_F19, \
|
||||
KC_NO, KC_NO,KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO)
|
||||
|
||||
};
|
||||
|
||||
void matrix_init_user(void) {
|
||||
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
iota_gfx_init(!has_usb()); // turns on the display
|
||||
#endif
|
||||
}
|
||||
|
||||
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
|
||||
#ifdef SSD1306OLED
|
||||
|
||||
// When add source files to SRC in rules.mk, you can use functions.
|
||||
const char *read_layer_state(void);
|
||||
const char *read_logo(void);
|
||||
void set_keylog(uint16_t keycode, keyrecord_t *record);
|
||||
const char *read_keylog(void);
|
||||
const char *read_keylogs(void);
|
||||
|
||||
// const char *read_mode_icon(bool swap);
|
||||
// const char *read_host_led_state(void);
|
||||
// void set_timelog(void);
|
||||
// const char *read_timelog(void);
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
iota_gfx_task();
|
||||
}
|
||||
|
||||
void matrix_render_user(struct CharacterMatrix *matrix) {
|
||||
if (is_master) {
|
||||
// If you want to change the display of OLED, you need to change here
|
||||
matrix_write_ln(matrix, read_layer_state());
|
||||
matrix_write_ln(matrix, read_keylog());
|
||||
matrix_write_ln(matrix, read_keylogs());
|
||||
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
|
||||
//matrix_write_ln(matrix, read_host_led_state());
|
||||
//matrix_write_ln(matrix, read_timelog());
|
||||
} else {
|
||||
matrix_write(matrix, read_logo());
|
||||
}
|
||||
}
|
||||
|
||||
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
|
||||
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
|
||||
memcpy(dest->display, source->display, sizeof(dest->display));
|
||||
dest->dirty = true;
|
||||
}
|
||||
}
|
||||
|
||||
void iota_gfx_task_user(void) {
|
||||
struct CharacterMatrix matrix;
|
||||
matrix_clear(&matrix);
|
||||
matrix_render_user(&matrix);
|
||||
matrix_update(&display, &matrix);
|
||||
}
|
||||
#endif//SSD1306OLED
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
#ifdef SSD1306OLED
|
||||
set_keylog(keycode, record);
|
||||
#endif
|
||||
// set_timelog();
|
||||
}
|
||||
return true;
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
AUTO_SHIFT_ENABLE = yes # Autoshift by holding down a key
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
|
||||
# If you want to change the display of OLED, you need to change here
|
||||
SRC += ./lib/glcdfont.c \
|
||||
./lib/rgb_state_reader.c \
|
||||
./lib/layer_state_reader.c \
|
||||
./lib/logo_reader.c \
|
||||
./lib/keylogger.c \
|
||||
# ./lib/mode_icon_reader.c \
|
||||
# ./lib/host_led_state_reader.c \
|
||||
# ./lib/timelogger.c \
|
||||
@@ -0,0 +1,131 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* This file has been automatically generated using ChibiStudio board
|
||||
* generator plugin. Do not edit manually.
|
||||
*/
|
||||
|
||||
#include "hal.h"
|
||||
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
const PALConfig pal_default_config = {
|
||||
#if STM32_HAS_GPIOA
|
||||
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
|
||||
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOB
|
||||
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
|
||||
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOC
|
||||
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
|
||||
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOD
|
||||
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
|
||||
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOE
|
||||
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
|
||||
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOF
|
||||
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
|
||||
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOG
|
||||
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
|
||||
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOH
|
||||
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
|
||||
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
|
||||
#endif
|
||||
#if STM32_HAS_GPIOI
|
||||
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
|
||||
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
void enter_bootloader_mode_if_requested(void);
|
||||
|
||||
/**
|
||||
* @brief Early initialization code.
|
||||
* @details This initialization must be performed just after stack setup
|
||||
* and before any other initialization.
|
||||
*/
|
||||
void __early_init(void) {
|
||||
enter_bootloader_mode_if_requested();
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
#if HAL_USE_SDC || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief SDC card detection.
|
||||
*/
|
||||
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
|
||||
|
||||
(void)sdcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief SDC card write protection detection.
|
||||
*/
|
||||
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
|
||||
|
||||
(void)sdcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif /* HAL_USE_SDC */
|
||||
|
||||
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
|
||||
/**
|
||||
* @brief MMC_SPI card detection.
|
||||
*/
|
||||
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return true;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief MMC_SPI card write protection detection.
|
||||
*/
|
||||
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
|
||||
|
||||
(void)mmcp;
|
||||
/* TODO: Fill the implementation.*/
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Board-specific initialization code.
|
||||
* @todo Add your board-specific code, if any.
|
||||
*/
|
||||
void boardInit(void) {
|
||||
}
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,5 @@
|
||||
# List of all the board related files.
|
||||
BOARDSRC = $(BOARD_PATH)/boards/noah_bd/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(BOARD_PATH)/boards/noah_bd
|
||||
@@ -0,0 +1,7 @@
|
||||
/* Address for jumping to bootloader on STM32 chips. */
|
||||
/* It is chip dependent, the correct number can be looked up here:
|
||||
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
* This also requires a patch to chibios:
|
||||
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
*/
|
||||
#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000
|
||||
@@ -0,0 +1,527 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/chconf.h
|
||||
* @brief Configuration file template.
|
||||
* @details A copy of this file must be placed in each project directory, it
|
||||
* contains the application specific kernel settings.
|
||||
*
|
||||
* @addtogroup config
|
||||
* @details Kernel related settings and hooks.
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef CHCONF_H
|
||||
#define CHCONF_H
|
||||
|
||||
#define _CHIBIOS_RT_CONF_
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name System timers settings
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief System time counter resolution.
|
||||
* @note Allowed values are 16 or 32 bits.
|
||||
*/
|
||||
#define CH_CFG_ST_RESOLUTION 32
|
||||
|
||||
/**
|
||||
* @brief System tick frequency.
|
||||
* @details Frequency of the system timer that drives the system ticks. This
|
||||
* setting also defines the system tick time unit.
|
||||
*/
|
||||
#define CH_CFG_ST_FREQUENCY 10000
|
||||
|
||||
/**
|
||||
* @brief Time delta constant for the tick-less mode.
|
||||
* @note If this value is zero then the system uses the classic
|
||||
* periodic tick. This value represents the minimum number
|
||||
* of ticks that is safe to specify in a timeout directive.
|
||||
* The value one is not valid, timeouts are rounded up to
|
||||
* this value.
|
||||
*/
|
||||
#define CH_CFG_ST_TIMEDELTA 2
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel parameters and options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Round robin interval.
|
||||
* @details This constant is the number of system ticks allowed for the
|
||||
* threads before preemption occurs. Setting this value to zero
|
||||
* disables the preemption for threads with equal priority and the
|
||||
* round robin becomes cooperative. Note that higher priority
|
||||
* threads can still preempt, the kernel is always preemptive.
|
||||
* @note Disabling the round robin preemption makes the kernel more compact
|
||||
* and generally faster.
|
||||
* @note The round robin preemption is not supported in tickless mode and
|
||||
* must be set to zero in that case.
|
||||
*/
|
||||
#define CH_CFG_TIME_QUANTUM 0
|
||||
|
||||
/**
|
||||
* @brief Managed RAM size.
|
||||
* @details Size of the RAM area to be managed by the OS. If set to zero
|
||||
* then the whole available RAM is used. The core memory is made
|
||||
* available to the heap allocator and/or can be used directly through
|
||||
* the simplified core memory allocator.
|
||||
*
|
||||
* @note In order to let the OS manage the whole RAM the linker script must
|
||||
* provide the @p __heap_base__ and @p __heap_end__ symbols.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE.
|
||||
*/
|
||||
#define CH_CFG_MEMCORE_SIZE 0
|
||||
|
||||
/**
|
||||
* @brief Idle thread automatic spawn suppression.
|
||||
* @details When this option is activated the function @p chSysInit()
|
||||
* does not spawn the idle thread. The application @p main()
|
||||
* function becomes the idle thread and must implement an
|
||||
* infinite loop.
|
||||
*/
|
||||
#define CH_CFG_NO_IDLE_THREAD FALSE
|
||||
|
||||
|
||||
/* Use __WFI in the idle thread for waiting. Does lower the power
|
||||
* consumption. */
|
||||
#define CORTEX_ENABLE_WFI_IDLE TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Performance options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief OS optimization.
|
||||
* @details If enabled then time efficient rather than space efficient code
|
||||
* is used when two possible implementations exist.
|
||||
*
|
||||
* @note This is not related to the compiler optimization options.
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_OPTIMIZE_SPEED TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Subsystem options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Time Measurement APIs.
|
||||
* @details If enabled then the time measurement APIs are included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_TM TRUE
|
||||
|
||||
/**
|
||||
* @brief Threads registry APIs.
|
||||
* @details If enabled then the registry APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_REGISTRY TRUE
|
||||
|
||||
/**
|
||||
* @brief Threads synchronization APIs.
|
||||
* @details If enabled then the @p chThdWait() function is included in
|
||||
* the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_WAITEXIT TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores APIs.
|
||||
* @details If enabled then the Semaphores APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES TRUE
|
||||
|
||||
/**
|
||||
* @brief Semaphores queuing mode.
|
||||
* @details If enabled then the threads are enqueued on semaphores by
|
||||
* priority rather than in FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mutexes APIs.
|
||||
* @details If enabled then the mutexes APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Enables recursive behavior on mutexes.
|
||||
* @note Recursive mutexes are heavier and have an increased
|
||||
* memory footprint.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs.
|
||||
* @details If enabled then the conditional variables APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MUTEXES.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS TRUE
|
||||
|
||||
/**
|
||||
* @brief Conditional Variables APIs with timeout.
|
||||
* @details If enabled then the conditional variables APIs with timeout
|
||||
* specification are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_CONDVARS.
|
||||
*/
|
||||
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs.
|
||||
* @details If enabled then the event flags APIs are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS TRUE
|
||||
|
||||
/**
|
||||
* @brief Events Flags APIs with timeout.
|
||||
* @details If enabled then the events APIs with timeout specification
|
||||
* are included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_EVENTS.
|
||||
*/
|
||||
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages APIs.
|
||||
* @details If enabled then the synchronous messages APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES TRUE
|
||||
|
||||
/**
|
||||
* @brief Synchronous Messages queuing mode.
|
||||
* @details If enabled then messages are served by priority rather than in
|
||||
* FIFO order.
|
||||
*
|
||||
* @note The default is @p FALSE. Enable this if you have special
|
||||
* requirements.
|
||||
* @note Requires @p CH_CFG_USE_MESSAGES.
|
||||
*/
|
||||
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
|
||||
|
||||
/**
|
||||
* @brief Mailboxes APIs.
|
||||
* @details If enabled then the asynchronous messages (mailboxes) APIs are
|
||||
* included in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_SEMAPHORES.
|
||||
*/
|
||||
#define CH_CFG_USE_MAILBOXES TRUE
|
||||
|
||||
/**
|
||||
* @brief Core Memory Manager APIs.
|
||||
* @details If enabled then the core memory manager APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMCORE TRUE
|
||||
|
||||
/**
|
||||
* @brief Heap Allocator APIs.
|
||||
* @details If enabled then the memory heap allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
|
||||
* @p CH_CFG_USE_SEMAPHORES.
|
||||
* @note Mutexes are recommended.
|
||||
*/
|
||||
#define CH_CFG_USE_HEAP TRUE
|
||||
|
||||
/**
|
||||
* @brief Memory Pools Allocator APIs.
|
||||
* @details If enabled then the memory pools allocator APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
*/
|
||||
#define CH_CFG_USE_MEMPOOLS TRUE
|
||||
|
||||
/**
|
||||
* @brief Dynamic Threads APIs.
|
||||
* @details If enabled then the dynamic threads creation APIs are included
|
||||
* in the kernel.
|
||||
*
|
||||
* @note The default is @p TRUE.
|
||||
* @note Requires @p CH_CFG_USE_WAITEXIT.
|
||||
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
|
||||
*/
|
||||
#define CH_CFG_USE_DYNAMIC TRUE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Debug options
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Debug option, kernel statistics.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_STATISTICS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, system state check.
|
||||
* @details If enabled the correct call protocol for system APIs is checked
|
||||
* at runtime.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_SYSTEM_STATE_CHECK FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, parameters checks.
|
||||
* @details If enabled then the checks on the API functions input
|
||||
* parameters are activated.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_CHECKS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, consistency checks.
|
||||
* @details If enabled then all the assertions in the kernel code are
|
||||
* activated. This includes consistency checks inside the kernel,
|
||||
* runtime anomalies and port-defined checks.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_ASSERTS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, trace buffer.
|
||||
* @details If enabled then the trace buffer is activated.
|
||||
*
|
||||
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
|
||||
|
||||
/**
|
||||
* @brief Trace buffer entries.
|
||||
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
|
||||
* different from @p CH_DBG_TRACE_MASK_DISABLED.
|
||||
*/
|
||||
#define CH_DBG_TRACE_BUFFER_SIZE 128
|
||||
|
||||
/**
|
||||
* @brief Debug option, stack checks.
|
||||
* @details If enabled then a runtime stack check is performed.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note The stack check is performed in a architecture/port dependent way.
|
||||
* It may not be implemented or some ports.
|
||||
* @note The default failure mode is to halt the system with the global
|
||||
* @p panic_msg variable set to @p NULL.
|
||||
*/
|
||||
#define CH_DBG_ENABLE_STACK_CHECK FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, stacks initialization.
|
||||
* @details If enabled then the threads working area is filled with a byte
|
||||
* value when a thread is created. This can be useful for the
|
||||
* runtime measurement of the used stack.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
*/
|
||||
#define CH_DBG_FILL_THREADS FALSE
|
||||
|
||||
/**
|
||||
* @brief Debug option, threads profiling.
|
||||
* @details If enabled then a field is added to the @p thread_t structure that
|
||||
* counts the system ticks occurred while executing the thread.
|
||||
*
|
||||
* @note The default is @p FALSE.
|
||||
* @note This debug option is not currently compatible with the
|
||||
* tickless mode.
|
||||
*/
|
||||
#define CH_DBG_THREADS_PROFILING FALSE
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/**
|
||||
* @name Kernel hooks
|
||||
* @{
|
||||
*/
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Threads descriptor structure extension.
|
||||
* @details User fields added to the end of the @p thread_t structure.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXTRA_FIELDS \
|
||||
/* Add threads custom fields here.*/
|
||||
|
||||
/**
|
||||
* @brief Threads initialization hook.
|
||||
* @details User initialization code added to the @p chThdInit() API.
|
||||
*
|
||||
* @note It is invoked from within @p chThdInit() and implicitly from all
|
||||
* the threads creation APIs.
|
||||
*/
|
||||
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
|
||||
/* Add threads initialization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Threads finalization hook.
|
||||
* @details User finalization code added to the @p chThdExit() API.
|
||||
*/
|
||||
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
|
||||
/* Add threads finalization code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Context switch hook.
|
||||
* @details This hook is invoked just before switching between threads.
|
||||
*/
|
||||
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
|
||||
/* Context switch code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR enter hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
|
||||
/* IRQ prologue code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief ISR exit hook.
|
||||
*/
|
||||
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
|
||||
/* IRQ epilogue code here.*/ \
|
||||
}
|
||||
|
||||
#define ARM_WFI_IMPL __WFI
|
||||
|
||||
/**
|
||||
* @brief Idle thread enter hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to activate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_ENTER_HOOK() { \
|
||||
/* Idle-enter code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle thread leave hook.
|
||||
* @note This hook is invoked within a critical zone, no OS functions
|
||||
* should be invoked from here.
|
||||
* @note This macro can be used to deactivate a power saving mode.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LEAVE_HOOK() { \
|
||||
/* Idle-leave code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Idle Loop hook.
|
||||
* @details This hook is continuously invoked by the idle thread loop.
|
||||
*/
|
||||
#define CH_CFG_IDLE_LOOP_HOOK() { \
|
||||
/* Idle loop code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System tick event hook.
|
||||
* @details This hook is invoked in the system tick handler immediately
|
||||
* after processing the virtual timers queue.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_TICK_HOOK() { \
|
||||
/* System tick event code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief System halt hook.
|
||||
* @details This hook is invoked in case to a system halting error before
|
||||
* the system is halted.
|
||||
*/
|
||||
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
|
||||
/* System halt code here.*/ \
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Trace hook.
|
||||
* @details This hook is invoked each time a new record is written in the
|
||||
* trace buffer.
|
||||
*/
|
||||
#define CH_CFG_TRACE_HOOK(tep) { \
|
||||
/* Trace code here.*/ \
|
||||
}
|
||||
|
||||
/** @} */
|
||||
|
||||
/*===========================================================================*/
|
||||
/* Port-specific settings (override port settings defaulted in chcore.h). */
|
||||
/*===========================================================================*/
|
||||
|
||||
#endif /* CHCONF_H */
|
||||
|
||||
/** @} */
|
||||
@@ -0,0 +1,54 @@
|
||||
/**
|
||||
* config.h
|
||||
*
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4D58 // MX
|
||||
#define PRODUCT_ID 0x0065 // noah 65
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER matrix
|
||||
#define PRODUCT NOAH
|
||||
#define DESCRIPTION 65% keybaord of the Matrix abel family
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
// i2c setting
|
||||
#define USE_I2CV1
|
||||
#define I2C1_SCL 8
|
||||
#define I2C1_SDA 9
|
||||
#define I2C1_CLOCK_SPEED 400000
|
||||
#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2
|
||||
#define PAL_MODE_STM32_ALTERNATE_OPENDRAIN (PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN)
|
||||
|
||||
// rgb matrix setting
|
||||
#define DRIVER_ADDR_1 0b1110100
|
||||
#define DRIVER_ADDR_2 0b1110110
|
||||
#define DRIVER_COUNT 2
|
||||
#define DRIVER_1_LED_TOTAL 36
|
||||
#define DRIVER_2_LED_TOTAL 36
|
||||
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
|
||||
|
||||
/* indicator rgb */
|
||||
#define WS2812_LED_N 7
|
||||
#define RGBLED_NUM WS2812_LED_N
|
||||
#define WS2812_TIM_N 3
|
||||
#define WS2812_TIM_CH 3
|
||||
#define PORT_WS2812 GPIOB
|
||||
#define PIN_WS2812 1
|
||||
#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
|
||||
#define WS2812_DMA_CHANNEL 5 // DMA channel for TIMx_UP
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
//#define WS2812_EXTERNAL_PULLUP
|
||||
|
||||
// tapping setting
|
||||
#define TAPPING_TERM 200
|
||||
#define RETRO_TAPPING
|
||||
#define PERMISSIVE_HOLD
|
||||
@@ -0,0 +1,822 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file EEPROM/EEPROM_Emulation/src/eeprom.c
|
||||
* @author MCD Application Team
|
||||
* @brief This file provides all the EEPROM emulation firmware functions.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright � 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/** @addtogroup EEPROM_Emulation
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "eeprom_f4.h"
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/* Private macro -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
|
||||
/* Global variable used to store variable value in read sequence */
|
||||
uint16_t DataVar = 0;
|
||||
|
||||
/* Virtual address defined by the user: 0xFFFF value is prohibited */
|
||||
extern uint16_t VirtAddVarTab[NB_OF_VAR];
|
||||
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
static HAL_StatusTypeDef EE_Format(void);
|
||||
static uint16_t EE_FindValidPage(uint8_t Operation);
|
||||
static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data);
|
||||
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data);
|
||||
static uint16_t EE_VerifyPageFullyErased(uint32_t Address);
|
||||
|
||||
/**
|
||||
* @brief Restore the pages to a known good state in case of page's status
|
||||
* corruption after a power loss.
|
||||
* @param None.
|
||||
* @retval - Flash error code: on write Flash error
|
||||
* - FLASH_COMPLETE: on success
|
||||
*/
|
||||
uint16_t EE_Init(void)
|
||||
{
|
||||
uint16_t PageStatus0 = 6, PageStatus1 = 6;
|
||||
uint16_t VarIdx = 0;
|
||||
uint16_t EepromStatus = 0, ReadStatus = 0;
|
||||
int16_t x = -1;
|
||||
HAL_StatusTypeDef FlashStatus;
|
||||
|
||||
FLASH_UnlockF4();
|
||||
|
||||
/* Get Page0 status */
|
||||
PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS);
|
||||
/* Get Page1 status */
|
||||
PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS);
|
||||
|
||||
/* Check for invalid header states and repair if necessary */
|
||||
switch (PageStatus0)
|
||||
{
|
||||
case ERASED:
|
||||
if (PageStatus1 == VALID_PAGE) /* Page0 erased, Page1 valid */
|
||||
{
|
||||
/* Erase Page0 */
|
||||
if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS))
|
||||
{
|
||||
FlashStatus = FLASH_EraseSectorF4(PAGE0_ID);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
else if (PageStatus1 == RECEIVE_DATA) /* Page0 erased, Page1 receive */
|
||||
{
|
||||
/* Erase Page0 */
|
||||
if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS))
|
||||
{
|
||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
/* Mark Page1 as valid */
|
||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE1_BASE_ADDRESS, VALID_PAGE);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
else /* First EEPROM access (Page0&1 are erased) or invalid state -> format EEPROM */
|
||||
{
|
||||
/* Erase both Page0 and Page1 and set Page0 as valid page */
|
||||
FlashStatus = EE_Format();
|
||||
/* If erase/program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case RECEIVE_DATA:
|
||||
if (PageStatus1 == VALID_PAGE) /* Page0 receive, Page1 valid */
|
||||
{
|
||||
/* Transfer data from Page1 to Page0 */
|
||||
for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++)
|
||||
{
|
||||
if (( *(__IO uint16_t*)(PAGE0_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx])
|
||||
{
|
||||
x = VarIdx;
|
||||
}
|
||||
if (VarIdx != x)
|
||||
{
|
||||
/* Read the last variables' updates */
|
||||
ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
|
||||
/* In case variable corresponding to the virtual address was found */
|
||||
if (ReadStatus != 0x1)
|
||||
{
|
||||
/* Transfer the variable to the Page0 */
|
||||
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (EepromStatus != HAL_OK)
|
||||
{
|
||||
return EepromStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
/* Mark Page0 as valid */
|
||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
/* Erase Page1 */
|
||||
if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS))
|
||||
{
|
||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
else if (PageStatus1 == ERASED) /* Page0 receive, Page1 erased */
|
||||
{
|
||||
/* Erase Page1 */
|
||||
if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS))
|
||||
{
|
||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
/* Mark Page0 as valid */
|
||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
else /* Invalid state -> format eeprom */
|
||||
{
|
||||
/* Erase both Page0 and Page1 and set Page0 as valid page */
|
||||
FlashStatus = EE_Format();
|
||||
/* If erase/program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case VALID_PAGE:
|
||||
if (PageStatus1 == VALID_PAGE) /* Invalid state -> format eeprom */
|
||||
{
|
||||
/* Erase both Page0 and Page1 and set Page0 as valid page */
|
||||
FlashStatus = EE_Format();
|
||||
/* If erase/program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
else if (PageStatus1 == ERASED) /* Page0 valid, Page1 erased */
|
||||
{
|
||||
/* Erase Page1 */
|
||||
if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS))
|
||||
{
|
||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
else /* Page0 valid, Page1 receive */
|
||||
{
|
||||
/* Transfer data from Page0 to Page1 */
|
||||
for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++)
|
||||
{
|
||||
if ((*(__IO uint16_t*)(PAGE1_BASE_ADDRESS + 6)) == VirtAddVarTab[VarIdx])
|
||||
{
|
||||
x = VarIdx;
|
||||
}
|
||||
if (VarIdx != x)
|
||||
{
|
||||
/* Read the last variables' updates */
|
||||
ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
|
||||
/* In case variable corresponding to the virtual address was found */
|
||||
if (ReadStatus != 0x1)
|
||||
{
|
||||
/* Transfer the variable to the Page1 */
|
||||
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (EepromStatus != HAL_OK)
|
||||
{
|
||||
return EepromStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
/* Mark Page1 as valid */
|
||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE1_BASE_ADDRESS, VALID_PAGE);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
/* Erase Page0 */
|
||||
if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS))
|
||||
{
|
||||
FlashStatus = FLASH_EraseSectorF4(PAGE0_ID);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
default: /* Any other state -> format eeprom */
|
||||
/* Erase both Page0 and Page1 and set Page0 as valid page */
|
||||
FlashStatus = EE_Format();
|
||||
/* If erase/program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Verify if specified page is fully erased.
|
||||
* @param Address: page address
|
||||
* This parameter can be one of the following values:
|
||||
* @arg PAGE0_BASE_ADDRESS: Page0 base address
|
||||
* @arg PAGE1_BASE_ADDRESS: Page1 base address
|
||||
* @retval page fully erased status:
|
||||
* - 0: if Page not erased
|
||||
* - 1: if Page erased
|
||||
*/
|
||||
uint16_t EE_VerifyPageFullyErased(uint32_t Address)
|
||||
{
|
||||
uint32_t ReadStatus = 1;
|
||||
uint16_t AddressValue = 0x5555;
|
||||
|
||||
/* Check each active page address starting from end */
|
||||
while (Address <= PAGE0_END_ADDRESS)
|
||||
{
|
||||
/* Get the current location content to be compared with virtual address */
|
||||
AddressValue = (*(__IO uint16_t*)Address);
|
||||
|
||||
/* Compare the read address with the virtual address */
|
||||
if (AddressValue != ERASED)
|
||||
{
|
||||
|
||||
/* In case variable value is read, reset ReadStatus flag */
|
||||
ReadStatus = 0;
|
||||
|
||||
break;
|
||||
}
|
||||
/* Next address location */
|
||||
Address = Address + 4;
|
||||
}
|
||||
|
||||
/* Return ReadStatus value: (0: Page not erased, 1: Sector erased) */
|
||||
return ReadStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Returns the last stored variable data, if found, which correspond to
|
||||
* the passed virtual address
|
||||
* @param VirtAddress: Variable virtual address
|
||||
* @param Data: Global variable contains the read variable value
|
||||
* @retval Success or error status:
|
||||
* - 0: if variable was found
|
||||
* - 1: if the variable was not found
|
||||
* - NO_VALID_PAGE: if no valid page was found.
|
||||
*/
|
||||
uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data)
|
||||
{
|
||||
uint16_t ValidPage = PAGE0;
|
||||
uint16_t AddressValue = 0x5555, ReadStatus = 1;
|
||||
uint32_t Address = EEPROM_START_ADDRESS, PageStartAddress = EEPROM_START_ADDRESS;
|
||||
|
||||
/* Get active Page for read operation */
|
||||
ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
|
||||
|
||||
/* Check if there is no valid page */
|
||||
if (ValidPage == NO_VALID_PAGE)
|
||||
{
|
||||
return NO_VALID_PAGE;
|
||||
}
|
||||
|
||||
/* Get the valid Page start Address */
|
||||
PageStartAddress = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE));
|
||||
|
||||
/* Get the valid Page end Address */
|
||||
Address = (uint32_t)((EEPROM_START_ADDRESS - 2) + (uint32_t)((1 + ValidPage) * PAGE_SIZE));
|
||||
|
||||
/* Check each active page address starting from end */
|
||||
while (Address > (PageStartAddress + 2))
|
||||
{
|
||||
/* Get the current location content to be compared with virtual address */
|
||||
AddressValue = (*(__IO uint16_t*)Address);
|
||||
|
||||
/* Compare the read address with the virtual address */
|
||||
if (AddressValue == VirtAddress)
|
||||
{
|
||||
/* Get content of Address-2 which is variable value */
|
||||
*Data = (*(__IO uint16_t*)(Address - 2));
|
||||
|
||||
/* In case variable value is read, reset ReadStatus flag */
|
||||
ReadStatus = 0;
|
||||
|
||||
break;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Next address location */
|
||||
Address = Address - 4;
|
||||
}
|
||||
}
|
||||
|
||||
/* Return ReadStatus value: (0: variable exist, 1: variable doesn't exist) */
|
||||
return ReadStatus;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Writes/upadtes variable data in EEPROM.
|
||||
* @param VirtAddress: Variable virtual address
|
||||
* @param Data: 16 bit data to be written
|
||||
* @retval Success or error status:
|
||||
* - FLASH_COMPLETE: on success
|
||||
* - PAGE_FULL: if valid page is full
|
||||
* - NO_VALID_PAGE: if no valid page was found
|
||||
* - Flash error code: on write Flash error
|
||||
*/
|
||||
uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data)
|
||||
{
|
||||
uint16_t Status = 0;
|
||||
|
||||
/* Write the variable virtual address and value in the EEPROM */
|
||||
Status = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
|
||||
|
||||
/* In case the EEPROM active page is full */
|
||||
if (Status == PAGE_FULL)
|
||||
{
|
||||
/* Perform Page transfer */
|
||||
Status = EE_PageTransfer(VirtAddress, Data);
|
||||
}
|
||||
|
||||
/* Return last operation status */
|
||||
return Status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Erases PAGE and PAGE1 and writes VALID_PAGE header to PAGE
|
||||
* @param None
|
||||
* @retval Status of the last operation (Flash write or erase) done during
|
||||
* EEPROM formating
|
||||
*/
|
||||
static HAL_StatusTypeDef EE_Format(void)
|
||||
{
|
||||
HAL_StatusTypeDef FlashStatus = HAL_OK;
|
||||
|
||||
/* Erase Page0 */
|
||||
if(!EE_VerifyPageFullyErased(PAGE0_BASE_ADDRESS))
|
||||
{
|
||||
FlashStatus = FLASH_EraseSectorF4(PAGE0_ID);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
/* Set Page0 as valid page: Write VALID_PAGE at Page0 base address */
|
||||
FlashStatus = FLASH_ProgramHalfWordF4(PAGE0_BASE_ADDRESS, VALID_PAGE);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
|
||||
/* Erase Page1 */
|
||||
if(!EE_VerifyPageFullyErased(PAGE1_BASE_ADDRESS))
|
||||
{
|
||||
FlashStatus = FLASH_EraseSectorF4(PAGE1_ID);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
}
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Find valid Page for write or read operation
|
||||
* @param Operation: operation to achieve on the valid page.
|
||||
* This parameter can be one of the following values:
|
||||
* @arg READ_FROM_VALID_PAGE: read operation from valid page
|
||||
* @arg WRITE_IN_VALID_PAGE: write operation from valid page
|
||||
* @retval Valid page number (PAGE or PAGE1) or NO_VALID_PAGE in case
|
||||
* of no valid page was found
|
||||
*/
|
||||
static uint16_t EE_FindValidPage(uint8_t Operation)
|
||||
{
|
||||
uint16_t PageStatus0 = 6, PageStatus1 = 6;
|
||||
|
||||
/* Get Page0 actual status */
|
||||
PageStatus0 = (*(__IO uint16_t*)PAGE0_BASE_ADDRESS);
|
||||
|
||||
/* Get Page1 actual status */
|
||||
PageStatus1 = (*(__IO uint16_t*)PAGE1_BASE_ADDRESS);
|
||||
|
||||
/* Write or read operation */
|
||||
switch (Operation)
|
||||
{
|
||||
case WRITE_IN_VALID_PAGE: /* ---- Write operation ---- */
|
||||
if (PageStatus1 == VALID_PAGE)
|
||||
{
|
||||
/* Page0 receiving data */
|
||||
if (PageStatus0 == RECEIVE_DATA)
|
||||
{
|
||||
return PAGE0; /* Page0 valid */
|
||||
}
|
||||
else
|
||||
{
|
||||
return PAGE1; /* Page1 valid */
|
||||
}
|
||||
}
|
||||
else if (PageStatus0 == VALID_PAGE)
|
||||
{
|
||||
/* Page1 receiving data */
|
||||
if (PageStatus1 == RECEIVE_DATA)
|
||||
{
|
||||
return PAGE1; /* Page1 valid */
|
||||
}
|
||||
else
|
||||
{
|
||||
return PAGE0; /* Page0 valid */
|
||||
}
|
||||
}
|
||||
else
|
||||
{
|
||||
return NO_VALID_PAGE; /* No valid Page */
|
||||
}
|
||||
|
||||
case READ_FROM_VALID_PAGE: /* ---- Read operation ---- */
|
||||
if (PageStatus0 == VALID_PAGE)
|
||||
{
|
||||
return PAGE0; /* Page0 valid */
|
||||
}
|
||||
else if (PageStatus1 == VALID_PAGE)
|
||||
{
|
||||
return PAGE1; /* Page1 valid */
|
||||
}
|
||||
else
|
||||
{
|
||||
return NO_VALID_PAGE ; /* No valid Page */
|
||||
}
|
||||
|
||||
default:
|
||||
return PAGE0; /* Page0 valid */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Verify if active page is full and Writes variable in EEPROM.
|
||||
* @param VirtAddress: 16 bit virtual address of the variable
|
||||
* @param Data: 16 bit data to be written as variable value
|
||||
* @retval Success or error status:
|
||||
* - FLASH_COMPLETE: on success
|
||||
* - PAGE_FULL: if valid page is full
|
||||
* - NO_VALID_PAGE: if no valid page was found
|
||||
* - Flash error code: on write Flash error
|
||||
*/
|
||||
static uint16_t EE_VerifyPageFullWriteVariable(uint16_t VirtAddress, uint16_t Data)
|
||||
{
|
||||
HAL_StatusTypeDef FlashStatus = HAL_OK;
|
||||
uint16_t ValidPage = PAGE0;
|
||||
uint32_t Address = EEPROM_START_ADDRESS, PageEndAddress = EEPROM_START_ADDRESS+PAGE_SIZE;
|
||||
|
||||
/* Get valid Page for write operation */
|
||||
ValidPage = EE_FindValidPage(WRITE_IN_VALID_PAGE);
|
||||
|
||||
/* Check if there is no valid page */
|
||||
if (ValidPage == NO_VALID_PAGE)
|
||||
{
|
||||
return NO_VALID_PAGE;
|
||||
}
|
||||
|
||||
/* Get the valid Page start Address */
|
||||
Address = (uint32_t)(EEPROM_START_ADDRESS + (uint32_t)(ValidPage * PAGE_SIZE));
|
||||
|
||||
/* Get the valid Page end Address */
|
||||
PageEndAddress = (uint32_t)((EEPROM_START_ADDRESS - 1) + (uint32_t)((ValidPage + 1) * PAGE_SIZE));
|
||||
|
||||
/* Check each active page address starting from begining */
|
||||
while (Address < PageEndAddress)
|
||||
{
|
||||
/* Verify if Address and Address+2 contents are 0xFFFFFFFF */
|
||||
if ((*(__IO uint32_t*)Address) == 0xFFFFFFFF)
|
||||
{
|
||||
/* Set variable data */
|
||||
FlashStatus = FLASH_ProgramHalfWordF4(Address, Data);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
/* Set variable virtual address */
|
||||
FlashStatus = FLASH_ProgramHalfWordF4(Address + 2, VirtAddress);
|
||||
/* Return program operation status */
|
||||
return FlashStatus;
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Next address location */
|
||||
Address = Address + 4;
|
||||
}
|
||||
}
|
||||
|
||||
/* Return PAGE_FULL in case the valid page is full */
|
||||
return PAGE_FULL;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Transfers last updated variables data from the full Page to
|
||||
* an empty one.
|
||||
* @param VirtAddress: 16 bit virtual address of the variable
|
||||
* @param Data: 16 bit data to be written as variable value
|
||||
* @retval Success or error status:
|
||||
* - FLASH_COMPLETE: on success
|
||||
* - PAGE_FULL: if valid page is full
|
||||
* - NO_VALID_PAGE: if no valid page was found
|
||||
* - Flash error code: on write Flash error
|
||||
*/
|
||||
static uint16_t EE_PageTransfer(uint16_t VirtAddress, uint16_t Data)
|
||||
{
|
||||
HAL_StatusTypeDef FlashStatus = HAL_OK;
|
||||
uint32_t NewPageAddress = EEPROM_START_ADDRESS;
|
||||
uint16_t OldPageId=0;
|
||||
uint16_t ValidPage = PAGE0, VarIdx = 0;
|
||||
uint16_t EepromStatus = 0, ReadStatus = 0;
|
||||
|
||||
/* Get active Page for read operation */
|
||||
ValidPage = EE_FindValidPage(READ_FROM_VALID_PAGE);
|
||||
|
||||
if (ValidPage == PAGE1) /* Page1 valid */
|
||||
{
|
||||
/* New page address where variable will be moved to */
|
||||
NewPageAddress = PAGE0_BASE_ADDRESS;
|
||||
|
||||
/* Old page ID where variable will be taken from */
|
||||
OldPageId = PAGE1_ID;
|
||||
}
|
||||
else if (ValidPage == PAGE0) /* Page0 valid */
|
||||
{
|
||||
/* New page address where variable will be moved to */
|
||||
NewPageAddress = PAGE1_BASE_ADDRESS;
|
||||
|
||||
/* Old page ID where variable will be taken from */
|
||||
OldPageId = PAGE0_ID;
|
||||
}
|
||||
else
|
||||
{
|
||||
return NO_VALID_PAGE; /* No valid Page */
|
||||
}
|
||||
|
||||
/* Set the new Page status to RECEIVE_DATA status */
|
||||
FlashStatus = FLASH_ProgramHalfWordF4(NewPageAddress, RECEIVE_DATA);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
|
||||
/* Write the variable passed as parameter in the new active page */
|
||||
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddress, Data);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (EepromStatus != HAL_OK)
|
||||
{
|
||||
return EepromStatus;
|
||||
}
|
||||
|
||||
/* Transfer process: transfer variables from old to the new active page */
|
||||
for (VarIdx = 0; VarIdx < NB_OF_VAR; VarIdx++)
|
||||
{
|
||||
if (VirtAddVarTab[VarIdx] != VirtAddress) /* Check each variable except the one passed as parameter */
|
||||
{
|
||||
/* Read the other last variable updates */
|
||||
ReadStatus = EE_ReadVariable(VirtAddVarTab[VarIdx], &DataVar);
|
||||
/* In case variable corresponding to the virtual address was found */
|
||||
if (ReadStatus != 0x1)
|
||||
{
|
||||
/* Transfer the variable to the new active page */
|
||||
EepromStatus = EE_VerifyPageFullWriteVariable(VirtAddVarTab[VarIdx], DataVar);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (EepromStatus != HAL_OK)
|
||||
{
|
||||
return EepromStatus;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* Erase the old Page: Set old Page status to ERASED status */
|
||||
FlashStatus = FLASH_EraseSectorF4(OldPageId);
|
||||
/* If erase operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
|
||||
/* Set new Page status to VALID_PAGE status */
|
||||
FlashStatus = FLASH_ProgramHalfWordF4(NewPageAddress, VALID_PAGE);
|
||||
/* If program operation was failed, a Flash error code is returned */
|
||||
if (FlashStatus != HAL_OK)
|
||||
{
|
||||
return FlashStatus;
|
||||
}
|
||||
|
||||
/* Return last operation flash status */
|
||||
return FlashStatus;
|
||||
}
|
||||
|
||||
/* flash operation */
|
||||
|
||||
#define EraseTimeout ((uint32_t)0x00000FFF)
|
||||
#define ProgramTimeout ((uint32_t)0x0000001F)
|
||||
|
||||
#define FLASH_PSIZE_BYTE 0
|
||||
#define FLASH_PSIZE_HFWORD FLASH_CR_PSIZE_0
|
||||
#define FLASH_PSIZE_WORD FLASH_CR_PSIZE_1
|
||||
#define FLASH_CR_SNB_Pos 3
|
||||
#define FLASH_KEY1_F4 0x45670123
|
||||
#define FLASH_KEY2_F4 0xCDEF89AB
|
||||
|
||||
#define ASSERT(exp) (void)((0))
|
||||
|
||||
static void Flash_Delay(void)
|
||||
{
|
||||
__IO uint32_t i = 0;
|
||||
for(i = 0xFF; i != 0; i--) { }
|
||||
}
|
||||
|
||||
static HAL_StatusTypeDef FLASH_GetStatus(void)
|
||||
{
|
||||
if ((FLASH->SR & FLASH_SR_BSY) == FLASH_SR_BSY)
|
||||
return HAL_BUSY;
|
||||
|
||||
if ((FLASH->SR & (FLASH_SR_PGSERR|FLASH_SR_PGPERR|FLASH_SR_PGAERR)) != 0)
|
||||
return HAL_ERROR;
|
||||
|
||||
if ((FLASH->SR & FLASH_SR_WRPERR) != 0 )
|
||||
return HAL_ERROR;
|
||||
|
||||
if ((FLASH->SR & FLASH_SR_SOP) != 0 )
|
||||
return HAL_ERROR;
|
||||
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
static HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t timeout)
|
||||
{
|
||||
/* Check for the Flash Status */
|
||||
HAL_StatusTypeDef status = FLASH_GetStatus();
|
||||
/* Wait for a Flash operation to complete or a TIMEOUT to occur */
|
||||
while ((status == HAL_BUSY) && (timeout != 0x00))
|
||||
{
|
||||
Flash_Delay();
|
||||
status = FLASH_GetStatus();
|
||||
timeout--;
|
||||
}
|
||||
if (timeout == 0)
|
||||
status = HAL_TIMEOUT;
|
||||
|
||||
return status;
|
||||
}
|
||||
HAL_StatusTypeDef FLASH_UnlockF4(void)
|
||||
{
|
||||
FLASH->KEYR = FLASH_KEY1_F4;
|
||||
FLASH->KEYR = FLASH_KEY2_F4;
|
||||
return HAL_OK;
|
||||
}
|
||||
|
||||
HAL_StatusTypeDef FLASH_EraseSectorF4(uint32_t sector)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_OK;
|
||||
/* Wait for last operation to be completed */
|
||||
status = FLASH_WaitForLastOperation(EraseTimeout);
|
||||
|
||||
if(status == HAL_OK) {
|
||||
/* if the previous operation is completed, proceed to erase the page */
|
||||
CLEAR_BIT(FLASH->CR, FLASH_CR_PSIZE);
|
||||
FLASH->CR |= FLASH_PSIZE_WORD;
|
||||
CLEAR_BIT(FLASH->CR, FLASH_CR_SNB);
|
||||
FLASH->CR |= FLASH_CR_SER | (sector << FLASH_CR_SNB_Pos);
|
||||
FLASH->CR |= FLASH_CR_STRT;
|
||||
|
||||
/* Wait for last operation to be completed */
|
||||
status = FLASH_WaitForLastOperation(EraseTimeout);
|
||||
if(status != HAL_TIMEOUT)
|
||||
{
|
||||
/* if the erase operation is completed, disable the PER Bit */
|
||||
FLASH->CR &= ~FLASH_CR_SNB;
|
||||
FLASH->CR &= ~FLASH_CR_SER;
|
||||
}
|
||||
|
||||
FLASH->SR = (FLASH_SR_EOP | FLASH_SR_SOP | FLASH_SR_WRPERR);
|
||||
}
|
||||
/* Return the Erase Status */
|
||||
return status;
|
||||
}
|
||||
|
||||
HAL_StatusTypeDef FLASH_ProgramHalfWordF4(uint32_t address, uint16_t data)
|
||||
{
|
||||
HAL_StatusTypeDef status = HAL_ERROR;
|
||||
|
||||
if (IS_FLASH_ADDRESS(address))
|
||||
{
|
||||
/* Wait for last operation to be completed */
|
||||
status = FLASH_WaitForLastOperation(ProgramTimeout);
|
||||
if(status == HAL_OK) {
|
||||
// set size to byte
|
||||
FLASH->CR &= ~FLASH_CR_PSIZE;
|
||||
FLASH->CR |= FLASH_PSIZE_HFWORD;
|
||||
FLASH->CR |= FLASH_CR_PG;
|
||||
|
||||
*(__IO uint16_t*)address = data;
|
||||
/* Wait for last operation to be completed */
|
||||
status = FLASH_WaitForLastOperation(ProgramTimeout);
|
||||
if(status != HAL_TIMEOUT)
|
||||
{
|
||||
/* if the program operation is completed, disable the PG Bit */
|
||||
FLASH->CR &= ~FLASH_CR_PG;
|
||||
}
|
||||
FLASH->SR = (FLASH_SR_EOP | FLASH_SR_SOP | FLASH_SR_PGSERR | FLASH_SR_PGPERR | FLASH_SR_PGAERR | FLASH_SR_WRPERR);
|
||||
}
|
||||
}
|
||||
return status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/******************* (C) COPYRIGHT 2017 STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,130 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file EEPROM/EEPROM_Emulation/inc/eeprom.h
|
||||
* @author MCD Application Team
|
||||
* @brief This file contains all the functions prototypes for the EEPROM
|
||||
* emulation firmware library.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright � 2017 STMicroelectronics International N.V.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted, provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistribution of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of other
|
||||
* contributors to this software may be used to endorse or promote products
|
||||
* derived from this software without specific written permission.
|
||||
* 4. This software, including modifications and/or derivative works of this
|
||||
* software, must execute solely and exclusively on microcontroller or
|
||||
* microprocessor devices manufactured by or for STMicroelectronics.
|
||||
* 5. Redistribution and use of this software other than as permitted under
|
||||
* this license is void and will automatically terminate your rights under
|
||||
* this license.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
||||
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
||||
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
||||
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
||||
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
||||
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
||||
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
||||
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
||||
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __EEPROM_H
|
||||
#define __EEPROM_H
|
||||
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "hal.h"
|
||||
|
||||
typedef enum
|
||||
{
|
||||
HAL_OK = 0x00U,
|
||||
HAL_ERROR = 0x01U,
|
||||
HAL_BUSY = 0x02U,
|
||||
HAL_TIMEOUT = 0x03U
|
||||
} HAL_StatusTypeDef;
|
||||
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
/* EEPROM emulation firmware error codes */
|
||||
#define EE_OK (uint32_t)HAL_OK
|
||||
#define EE_ERROR (uint32_t)HAL_ERROR
|
||||
#define EE_BUSY (uint32_t)HAL_BUSY
|
||||
#define EE_TIMEOUT (uint32_t)HAL_TIMEOUT
|
||||
|
||||
/* Define the size of the sectors to be used */
|
||||
#define PAGE_SIZE (uint32_t)0x4000 /* Page size = 16KByte */
|
||||
|
||||
/* Device voltage range supposed to be [2.7V to 3.6V], the operation will
|
||||
be done by word */
|
||||
#define VOLTAGE_RANGE (uint8_t)VOLTAGE_RANGE_3
|
||||
|
||||
/* EEPROM start address in Flash */
|
||||
#define EEPROM_START_ADDRESS ((uint32_t)0x08008000) /* EEPROM emulation start address:
|
||||
from sector2 : after 16KByte of used
|
||||
Flash memory */
|
||||
|
||||
/* Pages 0 and 1 base and end addresses */
|
||||
#define PAGE0_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x0000))
|
||||
#define PAGE0_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (PAGE_SIZE - 1)))
|
||||
#define PAGE0_ID 2//FLASH_SECTOR_2
|
||||
|
||||
#define PAGE1_BASE_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + 0x4000))
|
||||
#define PAGE1_END_ADDRESS ((uint32_t)(EEPROM_START_ADDRESS + (2 * PAGE_SIZE - 1)))
|
||||
#define PAGE1_ID 3//FLASH_SECTOR_3
|
||||
|
||||
/* Used Flash pages for EEPROM emulation */
|
||||
#define PAGE0 ((uint16_t)0x0000)
|
||||
#define PAGE1 ((uint16_t)0x0001) /* Page nb between PAGE0_BASE_ADDRESS & PAGE1_BASE_ADDRESS*/
|
||||
|
||||
/* No valid page define */
|
||||
#define NO_VALID_PAGE ((uint16_t)0x00AB)
|
||||
|
||||
/* Page status definitions */
|
||||
#define ERASED ((uint16_t)0xFFFF) /* Page is empty */
|
||||
#define RECEIVE_DATA ((uint16_t)0xEEEE) /* Page is marked to receive data */
|
||||
#define VALID_PAGE ((uint16_t)0x0000) /* Page containing valid data */
|
||||
|
||||
/* Valid pages in read and write defines */
|
||||
#define READ_FROM_VALID_PAGE ((uint8_t)0x00)
|
||||
#define WRITE_IN_VALID_PAGE ((uint8_t)0x01)
|
||||
|
||||
/* Page full define */
|
||||
#define PAGE_FULL ((uint8_t)0x80)
|
||||
|
||||
/* Variables' number */
|
||||
#define NB_OF_VAR ((uint8_t)0x16)
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
|
||||
HAL_StatusTypeDef FLASH_UnlockF4(void);
|
||||
HAL_StatusTypeDef FLASH_EraseSectorF4(uint32_t sector);
|
||||
HAL_StatusTypeDef FLASH_ProgramHalfWordF4(uint32_t address, uint16_t data);
|
||||
|
||||
uint16_t EE_Init(void);
|
||||
uint16_t EE_ReadVariable(uint16_t VirtAddress, uint16_t* Data);
|
||||
uint16_t EE_WriteVariable(uint16_t VirtAddress, uint16_t Data);
|
||||
|
||||
#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= EEPROM_START_ADDRESS) && ((ADDRESS) < PAGE1_END_ADDRESS))
|
||||
#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) >= PAGE0_ID) && ((SECTOR) <= PAGE1_ID))
|
||||
|
||||
#endif /* __EEPROM_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,388 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/**
|
||||
* @file templates/halconf.h
|
||||
* @brief HAL configuration header.
|
||||
* @details HAL configuration file, this file allows to enable or disable the
|
||||
* various device drivers from your application. You may also use
|
||||
* this file in order to override the device drivers default settings.
|
||||
*
|
||||
* @addtogroup HAL_CONF
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef HALCONF_H
|
||||
#define HALCONF_H
|
||||
|
||||
#include "mcuconf.h"
|
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PAL TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ADC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_CAN FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_DAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_EXT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_GPT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2C TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_I2S FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_ICU FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MAC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_MMC_SPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_PWM TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the QSPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_QSPI FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_RTC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SDC FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SERIAL_USB FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_SPI TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_UART FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_USB TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem.
|
||||
*/
|
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
|
||||
#define HAL_USE_WDG FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* ADC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* CAN driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch.
|
||||
*/
|
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
|
||||
#define CAN_USE_SLEEP_MODE TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* I2C driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus.
|
||||
*/
|
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MAC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_ZERO_COPY FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets.
|
||||
*/
|
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
|
||||
#define MAC_USE_EVENTS TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* MMC_SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
* This option is recommended also if the SPI driver does not
|
||||
* use a DMA channel and heavily loads the CPU.
|
||||
*/
|
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define MMC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SDC driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card.
|
||||
* @note Attempts are performed at 10mS intervals.
|
||||
*/
|
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
|
||||
#define SDC_INIT_RETRY 100
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards.
|
||||
* @note MMC support is not yet implemented so this option must be kept
|
||||
* at @p FALSE.
|
||||
*/
|
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
|
||||
#define SDC_MMC_SUPPORT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Delays insertions.
|
||||
* @details If enabled this options inserts delays into the MMC waiting
|
||||
* routines releasing some extra CPU time for the threads with
|
||||
* lower priority, this may slow down the driver a bit however.
|
||||
*/
|
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
|
||||
#define SDC_NICE_WAITING TRUE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Default bit rate.
|
||||
* @details Configuration parameter, this is the baud rate selected for the
|
||||
* default configuration.
|
||||
*/
|
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_DEFAULT_BITRATE 38400
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial buffers size.
|
||||
* @details Configuration parameter, you can change the depth of the queue
|
||||
* buffers depending on the requirements of your application.
|
||||
* @note The default is 16 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_BUFFERS_SIZE 16
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SERIAL_USB driver related setting. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size.
|
||||
* @details Configuration parameter, the buffer size must be a multiple of
|
||||
* the USB data endpoint maximum packet size.
|
||||
* @note The default is 256 bytes for both the transmission and receive
|
||||
* buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_SIZE 256
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Serial over USB number of buffers.
|
||||
* @note The default is 2 buffers.
|
||||
*/
|
||||
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
|
||||
#define SERIAL_USB_BUFFERS_NUMBER 2
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* SPI driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define SPI_USE_MUTUAL_EXCLUSION FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* UART driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define UART_USE_WAIT FALSE
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
|
||||
#define UART_USE_MUTUAL_EXCLUSION FALSE
|
||||
#endif
|
||||
|
||||
/*===========================================================================*/
|
||||
/* USB driver related settings. */
|
||||
/*===========================================================================*/
|
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs.
|
||||
* @note Disabling this option saves both code and data space.
|
||||
*/
|
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
|
||||
#define USB_USE_WAIT TRUE
|
||||
#endif
|
||||
|
||||
#endif /* HALCONF_H */
|
||||
|
||||
/** @} */
|
||||
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,20 @@
|
||||
/**
|
||||
* keymap.c
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_default(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
|
||||
KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
|
||||
KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT),
|
||||
[1] = LAYOUT_default(
|
||||
KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______,
|
||||
RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______,_______, _______, _______, _______),
|
||||
};
|
||||
@@ -0,0 +1,20 @@
|
||||
/**
|
||||
* keymap.c
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_iso(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PSCR,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP,
|
||||
KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGDN,
|
||||
KC_LSFT, KC_LGUI, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
|
||||
KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN,KC_RIGHT),
|
||||
[1] = LAYOUT_iso(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
|
||||
RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______),
|
||||
};
|
||||
@@ -0,0 +1,20 @@
|
||||
/**
|
||||
* keymap.c
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_default_splitspace(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
|
||||
KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
|
||||
KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT),
|
||||
[1] = LAYOUT_default_splitspace(
|
||||
KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______,
|
||||
RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______),
|
||||
};
|
||||
@@ -0,0 +1,20 @@
|
||||
/**
|
||||
* keymap.c
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_wkl(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
|
||||
KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
|
||||
KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT),
|
||||
[1] = LAYOUT_wkl(
|
||||
KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______,
|
||||
RESET, RGB_TOG, RGB_MOD, _______, KC_F13, KC_F14, KC_F24, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______),
|
||||
};
|
||||
@@ -0,0 +1,85 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32F411xE memory setup.
|
||||
*/
|
||||
MEMORY
|
||||
{
|
||||
flash0 : org = 0x08020000, len = 512k-128k
|
||||
flash1 : org = 0x00000000, len = 0
|
||||
flash2 : org = 0x00000000, len = 0
|
||||
flash3 : org = 0x00000000, len = 0
|
||||
flash4 : org = 0x00000000, len = 0
|
||||
flash5 : org = 0x00000000, len = 0
|
||||
flash6 : org = 0x00000000, len = 0
|
||||
flash7 : org = 0x00000000, len = 0
|
||||
ram0 : org = 0x20000000, len = 128k
|
||||
ram1 : org = 0x00000000, len = 0
|
||||
ram2 : org = 0x00000000, len = 0
|
||||
ram3 : org = 0x00000000, len = 0
|
||||
ram4 : org = 0x00000000, len = 0
|
||||
ram5 : org = 0x00000000, len = 0
|
||||
ram6 : org = 0x00000000, len = 0
|
||||
ram7 : org = 0x00000000, len = 0
|
||||
}
|
||||
|
||||
/* For each data/text section two region are defined, a virtual region
|
||||
and a load region (_LMA suffix).*/
|
||||
|
||||
/* Flash region to be used for exception vectors.*/
|
||||
REGION_ALIAS("VECTORS_FLASH", flash0);
|
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
|
||||
|
||||
/* Flash region to be used for constructors and destructors.*/
|
||||
REGION_ALIAS("XTORS_FLASH", flash0);
|
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash0);
|
||||
|
||||
/* Flash region to be used for code text.*/
|
||||
REGION_ALIAS("TEXT_FLASH", flash0);
|
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash0);
|
||||
|
||||
/* Flash region to be used for read only data.*/
|
||||
REGION_ALIAS("RODATA_FLASH", flash0);
|
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash0);
|
||||
|
||||
/* Flash region to be used for various.*/
|
||||
REGION_ALIAS("VARIOUS_FLASH", flash0);
|
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
|
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/
|
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
|
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing
|
||||
of all exceptions and interrupts.*/
|
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by
|
||||
the main() function.*/
|
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for data segment.*/
|
||||
REGION_ALIAS("DATA_RAM", ram0);
|
||||
REGION_ALIAS("DATA_RAM_LMA", flash0);
|
||||
|
||||
/* RAM region to be used for BSS segment.*/
|
||||
REGION_ALIAS("BSS_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the default heap.*/
|
||||
REGION_ALIAS("HEAP_RAM", ram0);
|
||||
|
||||
/* Generic rules inclusion.*/
|
||||
INCLUDE rules.ld
|
||||
@@ -0,0 +1,166 @@
|
||||
/**
|
||||
* matrix.c
|
||||
*/
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <string.h>
|
||||
#include "hal.h"
|
||||
#include "quantum.h"
|
||||
#include "timer.h"
|
||||
#include "wait.h"
|
||||
#include "printf.h"
|
||||
#include "matrix.h"
|
||||
|
||||
/**
|
||||
*
|
||||
* Row pins are input with internal pull-down.
|
||||
* Column pins are output and strobe with high.
|
||||
* Key is high or 1 when it turns on.
|
||||
*
|
||||
*/
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
static matrix_row_t matrix_debouncing[MATRIX_COLS];
|
||||
static bool debouncing = false;
|
||||
static uint16_t debouncing_time = 0;
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
//debug_enable = true;
|
||||
palSetLineMode(LINE_COL_1, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_2, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_3, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_4, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_5, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_6, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_7, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_8, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_9, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_10, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_11, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_12, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_13, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_14, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
palSetLineMode(LINE_COL_15, PAL_MODE_OUTPUT_PUSHPULL);
|
||||
|
||||
palSetLineMode(LINE_ROW_1, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetLineMode(LINE_ROW_2, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetLineMode(LINE_ROW_3, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetLineMode(LINE_ROW_4, PAL_MODE_INPUT_PULLDOWN);
|
||||
palSetLineMode(LINE_ROW_5, PAL_MODE_INPUT_PULLDOWN);
|
||||
|
||||
palClearLine(LINE_COL_1);
|
||||
palClearLine(LINE_COL_2);
|
||||
palClearLine(LINE_COL_3);
|
||||
palClearLine(LINE_COL_4);
|
||||
palClearLine(LINE_COL_5);
|
||||
palClearLine(LINE_COL_6);
|
||||
palClearLine(LINE_COL_7);
|
||||
palClearLine(LINE_COL_8);
|
||||
palClearLine(LINE_COL_9);
|
||||
palClearLine(LINE_COL_10);
|
||||
palClearLine(LINE_COL_11);
|
||||
palClearLine(LINE_COL_12);
|
||||
palClearLine(LINE_COL_13);
|
||||
palClearLine(LINE_COL_14);
|
||||
palClearLine(LINE_COL_15);
|
||||
|
||||
memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t));
|
||||
memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t));
|
||||
|
||||
matrix_init_quantum();
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
for (int col = 0; col < MATRIX_COLS; col++) {
|
||||
matrix_row_t data = 0;
|
||||
switch (col) {
|
||||
case 0: palSetLine(LINE_COL_1); break;
|
||||
case 1: palSetLine(LINE_COL_2); break;
|
||||
case 2: palSetLine(LINE_COL_3); break;
|
||||
case 3: palSetLine(LINE_COL_4); break;
|
||||
case 4: palSetLine(LINE_COL_5); break;
|
||||
case 5: palSetLine(LINE_COL_6); break;
|
||||
case 6: palSetLine(LINE_COL_7); break;
|
||||
case 7: palSetLine(LINE_COL_8); break;
|
||||
case 8: palSetLine(LINE_COL_9); break;
|
||||
case 9: palSetLine(LINE_COL_10); break;
|
||||
case 10: palSetLine(LINE_COL_11); break;
|
||||
case 11: palSetLine(LINE_COL_12); break;
|
||||
case 12: palSetLine(LINE_COL_13); break;
|
||||
case 13: palSetLine(LINE_COL_14); break;
|
||||
case 14: palSetLine(LINE_COL_15); break;
|
||||
}
|
||||
|
||||
// need wait to settle pin state
|
||||
wait_us(20);
|
||||
|
||||
data = (
|
||||
(palReadLine(LINE_ROW_1) << 0 ) |
|
||||
(palReadLine(LINE_ROW_2) << 1 ) |
|
||||
(palReadLine(LINE_ROW_3) << 2 ) |
|
||||
(palReadLine(LINE_ROW_4) << 3 ) |
|
||||
(palReadLine(LINE_ROW_5) << 4 )
|
||||
);
|
||||
|
||||
switch (col) {
|
||||
case 0: palClearLine(LINE_COL_1); break;
|
||||
case 1: palClearLine(LINE_COL_2); break;
|
||||
case 2: palClearLine(LINE_COL_3); break;
|
||||
case 3: palClearLine(LINE_COL_4); break;
|
||||
case 4: palClearLine(LINE_COL_5); break;
|
||||
case 5: palClearLine(LINE_COL_6); break;
|
||||
case 6: palClearLine(LINE_COL_7); break;
|
||||
case 7: palClearLine(LINE_COL_8); break;
|
||||
case 8: palClearLine(LINE_COL_9); break;
|
||||
case 9: palClearLine(LINE_COL_10); break;
|
||||
case 10: palClearLine(LINE_COL_11); break;
|
||||
case 11: palClearLine(LINE_COL_12); break;
|
||||
case 12: palClearLine(LINE_COL_13); break;
|
||||
case 13: palClearLine(LINE_COL_14); break;
|
||||
case 14: palClearLine(LINE_COL_15); break;
|
||||
}
|
||||
|
||||
if (matrix_debouncing[col] != data) {
|
||||
matrix_debouncing[col] = data;
|
||||
debouncing = true;
|
||||
debouncing_time = timer_read();
|
||||
}
|
||||
}
|
||||
|
||||
if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCING_DELAY) {
|
||||
for (int row = 0; row < MATRIX_ROWS; row++) {
|
||||
matrix[row] = 0;
|
||||
for (int col = 0; col < MATRIX_COLS; col++) {
|
||||
matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col);
|
||||
}
|
||||
}
|
||||
debouncing = false;
|
||||
}
|
||||
|
||||
matrix_scan_quantum();
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1<<col)); }
|
||||
|
||||
matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
printf("\nr/c 01234567\n");
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
printf("%X0: ", row);
|
||||
matrix_row_t data = matrix_get_row(row);
|
||||
for (int col = 0; col < MATRIX_COLS; col++) {
|
||||
if (data & (1<<col))
|
||||
printf("1");
|
||||
else
|
||||
printf("0");
|
||||
}
|
||||
printf("\n");
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,268 @@
|
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef MCUCONF_H
|
||||
#define MCUCONF_H
|
||||
|
||||
/*
|
||||
* STM32F4xx drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the whole
|
||||
* driver is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
#define STM32F4xx_MCUCONF
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED TRUE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_CLOCK48_REQUIRED TRUE
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PLLM_VALUE 8
|
||||
#define STM32_PLLN_VALUE 192
|
||||
#define STM32_PLLP_VALUE 2
|
||||
#define STM32_PLLQ_VALUE 4
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2
|
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI
|
||||
#define STM32_RTCPRE_VALUE 8
|
||||
#define STM32_MCO1SEL STM32_MCO1SEL_HSI
|
||||
#define STM32_MCO1PRE STM32_MCO1PRE_DIV1
|
||||
#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK
|
||||
#define STM32_MCO2PRE STM32_MCO2PRE_DIV5
|
||||
#define STM32_I2SSRC STM32_I2SSRC_PLLI2S
|
||||
#define STM32_PLLI2SN_VALUE 192
|
||||
#define STM32_PLLI2SR_VALUE 2
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
#define STM32_BKPRAM_ENABLE FALSE
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4
|
||||
#define STM32_ADC_USE_ADC1 FALSE
|
||||
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
|
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
||||
#define STM32_ADC_IRQ_PRIORITY 6
|
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6
|
||||
|
||||
/*
|
||||
* EXT driver system settings.
|
||||
*/
|
||||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 15
|
||||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
|
||||
#define STM32_EXT_EXTI22_IRQ_PRIORITY 15
|
||||
|
||||
/*
|
||||
* GPT driver system settings.
|
||||
*/
|
||||
#define STM32_GPT_USE_TIM1 FALSE
|
||||
#define STM32_GPT_USE_TIM2 FALSE
|
||||
#define STM32_GPT_USE_TIM3 FALSE
|
||||
#define STM32_GPT_USE_TIM4 TRUE
|
||||
#define STM32_GPT_USE_TIM5 FALSE
|
||||
#define STM32_GPT_USE_TIM9 FALSE
|
||||
#define STM32_GPT_USE_TIM11 FALSE
|
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM9_IRQ_PRIORITY 7
|
||||
#define STM32_GPT_TIM11_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* I2C driver system settings.
|
||||
*/
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
#define STM32_I2C_USE_I2C2 FALSE
|
||||
#define STM32_I2C_USE_I2C3 FALSE
|
||||
#define STM32_I2C_BUSY_TIMEOUT 50
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
|
||||
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C3_IRQ_PRIORITY 5
|
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
||||
#define STM32_I2C_I2C3_DMA_PRIORITY 3
|
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* I2S driver system settings.
|
||||
*/
|
||||
#define STM32_I2S_USE_SPI2 FALSE
|
||||
#define STM32_I2S_USE_SPI3 FALSE
|
||||
#define STM32_I2S_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_I2S_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_I2S_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_I2S_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ICU driver system settings.
|
||||
*/
|
||||
#define STM32_ICU_USE_TIM1 FALSE
|
||||
#define STM32_ICU_USE_TIM2 FALSE
|
||||
#define STM32_ICU_USE_TIM3 FALSE
|
||||
#define STM32_ICU_USE_TIM4 FALSE
|
||||
#define STM32_ICU_USE_TIM5 FALSE
|
||||
#define STM32_ICU_USE_TIM9 FALSE
|
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_ICU_TIM9_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define STM32_PWM_USE_ADVANCED FALSE
|
||||
#define STM32_PWM_USE_TIM1 TRUE
|
||||
#define STM32_PWM_USE_TIM2 FALSE
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
#define STM32_PWM_USE_TIM4 FALSE
|
||||
#define STM32_PWM_USE_TIM5 FALSE
|
||||
#define STM32_PWM_USE_TIM9 FALSE
|
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
|
||||
#define STM32_PWM_TIM9_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define STM32_SERIAL_USE_USART1 FALSE
|
||||
#define STM32_SERIAL_USE_USART2 FALSE
|
||||
#define STM32_SERIAL_USE_USART3 FALSE
|
||||
#define STM32_SERIAL_USE_USART6 FALSE
|
||||
#define STM32_SERIAL_USART1_PRIORITY 12
|
||||
#define STM32_SERIAL_USART2_PRIORITY 12
|
||||
#define STM32_SERIAL_USART3_PRIORITY 12
|
||||
#define STM32_SERIAL_USART6_PRIORITY 12
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define STM32_SPI_USE_SPI1 TRUE
|
||||
#define STM32_SPI_USE_SPI2 FALSE
|
||||
#define STM32_SPI_USE_SPI3 FALSE
|
||||
#define STM32_SPI_USE_SPI4 FALSE
|
||||
#define STM32_SPI_USE_SPI5 FALSE
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
|
||||
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
|
||||
#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
|
||||
#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
|
||||
#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1)
|
||||
#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
|
||||
#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6)
|
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI4_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI5_DMA_PRIORITY 1
|
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI4_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_SPI5_IRQ_PRIORITY 10
|
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* ST driver system settings.
|
||||
*/
|
||||
#define STM32_ST_IRQ_PRIORITY 8
|
||||
#define STM32_ST_USE_TIMER 2
|
||||
|
||||
/*
|
||||
* UART driver system settings.
|
||||
*/
|
||||
#define STM32_UART_USE_USART1 FALSE
|
||||
#define STM32_UART_USE_USART2 FALSE
|
||||
#define STM32_UART_USE_USART3 FALSE
|
||||
#define STM32_UART_USE_USART6 FALSE
|
||||
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5)
|
||||
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
|
||||
#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
|
||||
#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2)
|
||||
#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
|
||||
#define STM32_UART_USART1_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART2_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART3_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART6_IRQ_PRIORITY 12
|
||||
#define STM32_UART_USART1_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART2_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART3_DMA_PRIORITY 0
|
||||
#define STM32_UART_USART6_DMA_PRIORITY 0
|
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_OTG1 TRUE
|
||||
#define STM32_USB_OTG1_IRQ_PRIORITY 14
|
||||
#define STM32_USB_OTG1_RX_FIFO_SIZE 512
|
||||
#define STM32_USB_OTG_THREAD_PRIO LOWPRIO
|
||||
#define STM32_USB_OTG_THREAD_STACK_SIZE 128
|
||||
#define STM32_USB_OTGFIFO_FILL_BASEPRI 0
|
||||
|
||||
/*
|
||||
* WDG driver system settings.
|
||||
*/
|
||||
#define STM32_WDG_USE_IWDG FALSE
|
||||
|
||||
#endif /* MCUCONF_H */
|
||||
@@ -0,0 +1,243 @@
|
||||
/**
|
||||
* noah.c
|
||||
*/
|
||||
|
||||
#include "noah.h"
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#include <string.h>
|
||||
#include "rgblight.h"
|
||||
#include "ws2812_f4.h"
|
||||
extern rgblight_config_t rgblight_config;
|
||||
|
||||
// led 0 for caps lock, led 1 for scroll lock, led 3 for num lock
|
||||
// led 4 for layer 1, led 5 for layer 2, led 6 for layer 3, led 7 for layer 4
|
||||
#if RGBLED_NUM < 7
|
||||
#error "MUST set the RGBLED_NUM bigger than 7"
|
||||
#endif
|
||||
LED_TYPE noah_leds[RGBLED_NUM];
|
||||
static bool noah_led_mode = false;
|
||||
void rgblight_set(void) {
|
||||
memset(&noah_leds[0], 0, sizeof(noah_leds));
|
||||
if (!rgblight_config.enable) {
|
||||
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
|
||||
led[i].r = 0;
|
||||
led[i].g = 0;
|
||||
led[i].b = 0;
|
||||
}
|
||||
}
|
||||
if (noah_led_mode) {
|
||||
uint8_t ind_led = host_keyboard_leds();
|
||||
if (IS_LED_ON(ind_led, USB_LED_CAPS_LOCK)) {
|
||||
noah_leds[0] = led[0];
|
||||
}
|
||||
if (IS_LED_ON(ind_led, USB_LED_SCROLL_LOCK)) {
|
||||
noah_leds[1] = led[1];
|
||||
}
|
||||
if (IS_LED_ON(ind_led, USB_LED_NUM_LOCK)) {
|
||||
noah_leds[2] = led[2];
|
||||
}
|
||||
for (int32_t i = 0; i < 4; i++) {
|
||||
if(layer_state_is(i+1)) {
|
||||
noah_leds[i + 3] = led[i + 3];
|
||||
}
|
||||
}
|
||||
} else {
|
||||
memcpy(&noah_leds[0], &led[0], sizeof(noah_leds));
|
||||
}
|
||||
|
||||
ws2812_setleds(noah_leds, RGBLED_NUM);
|
||||
}
|
||||
#endif
|
||||
|
||||
void matrix_scan_kb(void) { matrix_scan_user(); }
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
}
|
||||
__attribute__((weak))
|
||||
void matrix_init_user(void) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
ws2812_init();
|
||||
rgblight_enable();
|
||||
#endif
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
rgb_matrix_disable();
|
||||
#endif
|
||||
}
|
||||
|
||||
__attribute__((weak))
|
||||
void matrix_scan_user(void) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
rgblight_task();
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
|
||||
/* Refer to IS31 manual for these locations
|
||||
* driver
|
||||
* | R location
|
||||
* | | G location
|
||||
* | | | B location
|
||||
* | | | | */
|
||||
|
||||
// left CB
|
||||
{0, C1_9, C3_10, C4_10},
|
||||
{0, C1_10, C2_10, C4_11},
|
||||
{0, C1_11, C2_11, C3_11},
|
||||
{0, C1_12, C2_12, C3_12},
|
||||
{0, C1_13, C2_13, C3_13},
|
||||
{0, C1_14, C2_14, C3_14},
|
||||
{0, C1_15, C2_15, C3_15},
|
||||
{0, C1_16, C2_16, C3_16},
|
||||
|
||||
{0, C5_9, C4_9, C6_9},
|
||||
{0, C5_16, C4_16, C6_16},
|
||||
|
||||
{0, C9_9, C8_9, C7_9},
|
||||
{0, C9_10, C8_10, C7_10},
|
||||
{0, C9_11, C8_11, C7_11},
|
||||
{0, C9_12, C8_12, C7_12},
|
||||
{0, C9_13, C8_13, C7_13},
|
||||
{0, C9_14, C8_14, C7_14},
|
||||
{0, C9_15, C8_15, C6_14},
|
||||
{0, C9_16, C7_15, C6_15},
|
||||
|
||||
// left CA
|
||||
{0, C1_1, C3_2, C4_2},
|
||||
{0, C1_2, C2_2, C4_3},
|
||||
{0, C1_3, C2_3, C3_3},
|
||||
{0, C1_4, C2_4, C3_4},
|
||||
{0, C1_5, C2_5, C3_5},
|
||||
{0, C1_6, C2_6, C3_6},
|
||||
{0, C1_7, C2_7, C3_7},
|
||||
{0, C1_8, C2_8, C3_8},
|
||||
|
||||
{0, C5_1, C4_1, C6_1},
|
||||
{0, C5_8, C4_8, C6_8},
|
||||
|
||||
{0, C9_1, C8_1, C7_1},
|
||||
{0, C9_2, C8_2, C7_2},
|
||||
{0, C9_3, C8_3, C7_3},
|
||||
{0, C9_4, C8_4, C7_4},
|
||||
{0, C9_5, C8_5, C7_5},
|
||||
{0, C9_6, C8_6, C7_6},
|
||||
{0, C9_7, C8_7, C6_6},
|
||||
{0, C9_8, C7_7, C6_7},
|
||||
|
||||
// right CA
|
||||
{1, C1_1, C3_2, C4_2},
|
||||
{1, C1_2, C2_2, C4_3},
|
||||
{1, C1_3, C2_3, C3_3},
|
||||
{1, C1_4, C2_4, C3_4},
|
||||
{1, C1_5, C2_5, C3_5},
|
||||
{1, C1_6, C2_6, C3_6},
|
||||
{1, C1_7, C2_7, C3_7},
|
||||
{1, C1_8, C2_8, C3_8},
|
||||
|
||||
{1, C5_1, C4_1, C6_1},
|
||||
{1, C5_8, C4_8, C6_8},
|
||||
|
||||
{1, C9_1, C8_1, C7_1},
|
||||
{1, C9_2, C8_2, C7_2},
|
||||
{1, C9_3, C8_3, C7_3},
|
||||
{1, C9_4, C8_4, C7_4},
|
||||
{1, C9_5, C8_5, C7_5},
|
||||
{1, C9_6, C8_6, C7_6},
|
||||
{1, C9_7, C8_7, C6_6},
|
||||
{1, C9_8, C7_7, C6_7},
|
||||
// right CB
|
||||
{1, C1_9, C3_10, C4_10},
|
||||
{1, C1_10, C2_10, C4_11},
|
||||
{1, C1_11, C2_11, C3_11},
|
||||
{1, C1_12, C2_12, C3_12},
|
||||
{1, C1_13, C2_13, C3_13},
|
||||
{1, C1_14, C2_14, C3_14},
|
||||
{1, C1_15, C2_15, C3_15},
|
||||
{1, C1_16, C2_16, C3_16},
|
||||
|
||||
{1, C5_9, C4_9, C6_9},
|
||||
{1, C5_16, C4_16, C6_16},
|
||||
|
||||
{1, C9_9, C8_9, C7_9},
|
||||
{1, C9_10, C8_10, C7_10},
|
||||
{1, C9_11, C8_11, C7_11},
|
||||
{1, C9_12, C8_12, C7_12},
|
||||
{1, C9_13, C8_13, C7_13},
|
||||
{1, C9_14, C8_14, C7_14},
|
||||
{1, C9_15, C8_15, C6_14},
|
||||
{1, C9_16, C7_15, C6_15},
|
||||
};
|
||||
|
||||
led_config_t g_led_config = {
|
||||
{
|
||||
{ 1, 2, 3, 4, 5, 6, 7, 36, 37, 38, 39, 40, NO_LED, 41},
|
||||
{ 0, 8, 10, 11, 12, 13, 14, 44, 46, 47, 48, 49, 50, 51},
|
||||
{ 30, 18, 26, 9, 19, 15, 16, 17, 55, 56, 57, 58, 59, 60},
|
||||
{ 29, 31, 32, 33, 20, 21, 23, 22, 54, 62, 64, 65, 66, 63},
|
||||
{ 34, 35, 27, 25, 67, 68, 69, 70, 71, 61, 53, 45, 42, 43},
|
||||
},
|
||||
{
|
||||
{ 0, 16},{ 0, 0},{ 15, 0},{ 30, 0},{ 45, 0},{ 60, 0},{ 75, 0},{ 90, 0},
|
||||
{ 20, 16},{ 42, 32},
|
||||
{ 45, 16},{ 50, 16},{ 65, 16},{ 80, 16},{ 95, 16},{ 70, 32},{ 84, 32},{ 98, 32},
|
||||
|
||||
{ 14, 32},{ 56, 32},{ 50, 48},{ 80, 48},{110, 48},{ 95, 48},{100, 64},{112, 64},
|
||||
{ 42, 32},{ 38, 64},
|
||||
{ 0, 32},{ 10, 48},{ 0, 48},{ 20, 48},{ 35, 48},{ 65, 48},{ 0, 64},{ 19, 64},
|
||||
|
||||
{105, 0},{120, 0},{135, 0},{150, 0},{165, 0},{180, 0},{202, 0},{224, 0},
|
||||
{110, 16},{224, 16},
|
||||
{125, 16},{140, 16},{155, 16},{172, 16},{187, 16},{202, 16},{210, 32},{224, 32},
|
||||
|
||||
{125, 48},{112, 32},{126, 32},{140, 32},{154, 32},{168, 32},{182, 32},{224, 48},
|
||||
{140, 48},{200, 48},
|
||||
{155, 48},{170, 48},{185, 48},{150, 64},{173, 64},{195, 64},{210, 64},{224, 64}
|
||||
},
|
||||
{
|
||||
1, 1, 4, 4, 4, 4, 4, 4,
|
||||
4, 4,
|
||||
4, 4, 4, 4, 4, 4, 4, 4,
|
||||
|
||||
4, 4, 4, 4, 4, 4, 4, 4,
|
||||
4, 4,
|
||||
1, 1, 1, 4, 4, 4, 1, 1,
|
||||
|
||||
4, 4, 4, 4, 4, 4, 1, 1,
|
||||
4, 1,
|
||||
4, 4, 4, 4, 4, 4, 4, 1,
|
||||
|
||||
4, 4, 4, 4, 4, 4, 4, 1,
|
||||
4, 4,
|
||||
4, 4, 4, 1, 1, 1, 1, 1,
|
||||
}
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
if (record->event.pressed) {
|
||||
switch(keycode) {
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
case KC_F24: // switch the led mode on or off
|
||||
noah_led_mode = !noah_led_mode;
|
||||
return false;
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
case KC_F13: // toggle rgb matrix
|
||||
rgb_matrix_toggle();
|
||||
return false;
|
||||
case KC_F14:
|
||||
rgb_matrix_step();
|
||||
return false;
|
||||
#endif
|
||||
#endif
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
return true;
|
||||
}
|
||||
@@ -0,0 +1,63 @@
|
||||
/**
|
||||
* noah.h
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_default( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
|
||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k48) \
|
||||
{ \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \
|
||||
{k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
|
||||
{k40, k41, k42,KC_NO,k43,KC_NO,k44, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \
|
||||
}
|
||||
|
||||
#define LAYOUT_wkl( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
|
||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k43, k45, k46, k47, k48 \
|
||||
) { \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \
|
||||
{k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
|
||||
{k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \
|
||||
}
|
||||
|
||||
#define LAYOUT_iso( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k43, k45, k46, k47, k48 \
|
||||
) { \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c,KC_NO, k0e}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,KC_NO, KC_NO}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO}, \
|
||||
{k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
|
||||
{k40, k41, k42,KC_NO,k43,KC_NO,KC_NO, k45, k46, k47, k48, k1e, k2e, k3e, k0f} \
|
||||
}
|
||||
|
||||
#define LAYOUT_default_splitspace( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \
|
||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a \
|
||||
) { \
|
||||
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \
|
||||
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO}, \
|
||||
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b,KC_NO,k2d, KC_NO}, \
|
||||
{k30,KC_NO,k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO}, \
|
||||
{k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k1e, k2e, k3e, k0f} \
|
||||
}
|
||||
@@ -0,0 +1,19 @@
|
||||
# NOAH 65 keyboard
|
||||
|
||||
|
||||
This was the first 65% keyboard made by the Matrix team, it had the following features:
|
||||
|
||||
- per key rgb led
|
||||
- 7 RGB led for caps, scroll , num lock and layer state indicator, or just play light animation effects
|
||||
- ansi and iso layouts, and split spacebar supported
|
||||
- pre-programmed bootloader which emulated usb stick to ease firmware updating
|
||||
|
||||
Keyboard Maintainer: [astro](https://github.com/yulei)
|
||||
Hardware Supported: Matrix NOAH keyboard
|
||||
Hardware Availability: [NOAH Keybaord](https://geekhack.org/index.php?topic=102300.0)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make matrix/noah:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
@@ -0,0 +1,57 @@
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F4xx
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = noah_boot
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f4xx
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = noah_bd
|
||||
|
||||
# Cortex version
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
|
||||
USE_FPU = yes
|
||||
|
||||
# Vector table for application
|
||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
||||
OPT_DEFS =
|
||||
|
||||
# Options to pass to dfu-util when flashing
|
||||
#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
|
||||
#DFU_SUFFIX_ARGS = -p DF11 -v 0483
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in
|
||||
|
||||
CUSTOM_MATRIX = yes
|
||||
RGB_MATRIX_ENABLE = yes
|
||||
|
||||
RGBLIGHT_ENABLE = yes
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes
|
||||
|
||||
# project specific files
|
||||
SRC += \
|
||||
matrix.c \
|
||||
ws2812_f4.c \
|
||||
eeprom_f4.c
|
||||
@@ -0,0 +1,272 @@
|
||||
/**
|
||||
* @file ws2812.c
|
||||
* @author Austin Glaser <austin.glaser@gmail.com>, Joerg Wangemann <joerg.wangemann@gmail.com>
|
||||
* @brief WS2812 LED driver
|
||||
*
|
||||
* Copyright (C) 2016 Austin Glaser, 2017 Joerg Wangemann
|
||||
*
|
||||
* This software may be modified and distributed under the terms
|
||||
* of the MIT license. See the LICENSE file for details.
|
||||
*
|
||||
* @todo Put in names and descriptions of variables which need to be defined to use this file
|
||||
*
|
||||
* @addtogroup WS2812
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* --- PRIVATE DEPENDENCIES ------------------------------------------------- */
|
||||
|
||||
// This Driver
|
||||
#include "ws2812_f4.h"
|
||||
|
||||
// Standard
|
||||
#include <stdint.h>
|
||||
|
||||
// ChibiOS
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
|
||||
#include "wait.h"
|
||||
// Application
|
||||
//#include "board.h"
|
||||
|
||||
// TODO: Add these #define's to the headers of your project.
|
||||
// Pin, timer and dma are all connected, check them all if you change one.
|
||||
// Tested with STM32F4, working at 144 or 168 MHz.
|
||||
//#define WS2812_LED_N 2 // Number of LEDs
|
||||
//#define PORT_WS2812 GPIOB
|
||||
//#define PIN_WS2812 9
|
||||
//#define WS2812_TIM_N 4 // timer, 1-11
|
||||
//#define WS2812_TIM_CH 3 // timer channel, 0-3
|
||||
//#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA stream for TIMx_UP (look up in reference manual under DMA Channel selection)
|
||||
//#define WS2812_DMA_CHANNEL 6 // DMA channel for TIMx_UP
|
||||
// The WS2812 expects 5V signal level (or at least 0.7 * VDD). Sometimes it works
|
||||
// with a 3V signal level, otherwise the easiest way to get the signal level to 5V
|
||||
// is to add an external pullup resistor from the DI pin to 5V (10k will do) and
|
||||
// configure the pin as open drain.
|
||||
// (An SMD resistor is easily solders on the connections of a light strip)
|
||||
// Uncomment the next line if an external pullup resistor is used.
|
||||
//#define WS2812_EXTERNAL_PULLUP
|
||||
|
||||
/* --- CONFIGURATION CHECK -------------------------------------------------- */
|
||||
|
||||
#if !defined(WS2812_LED_N)
|
||||
#error WS2812 LED chain length not specified
|
||||
#elif WS2812_LED_N <= 0
|
||||
#error WS2812 LED chain length set to invalid value
|
||||
#endif
|
||||
|
||||
#if !defined(WS2812_TIM_N)
|
||||
#error WS2812 timer not specified
|
||||
#endif
|
||||
#if defined(STM32F2XX) || defined(STM32F4XX) || defined(STM32F7XX)
|
||||
#if WS2812_TIM_N <= 2
|
||||
#define WS2812_AF 1
|
||||
#elif WS2812_TIM_N <= 5
|
||||
#define WS2812_AF 2
|
||||
#elif WS2812_TIM_N <= 11
|
||||
#define WS2812_AF 3
|
||||
#endif
|
||||
#elif !defined(WS2812_AF)
|
||||
#error WS2812_AF timer alternate function not specified
|
||||
#endif
|
||||
|
||||
#if !defined(WS2812_TIM_CH)
|
||||
#error WS2812 timer channel not specified
|
||||
#elif WS2812_TIM_CH >= 4
|
||||
#error WS2812 timer channel set to invalid value
|
||||
#endif
|
||||
|
||||
/* --- PRIVATE CONSTANTS ---------------------------------------------------- */
|
||||
|
||||
#define WS2812_PWM_FREQUENCY (STM32_SYSCLK/2) /**< Clock frequency of PWM, must be valid with respect to system clock! */
|
||||
#define WS2812_PWM_PERIOD (WS2812_PWM_FREQUENCY/800000) /**< Clock period in ticks. 1 / 800kHz = 1.25 uS (as per datasheet) */
|
||||
|
||||
/**
|
||||
* @brief Number of bit-periods to hold the data line low at the end of a frame
|
||||
*
|
||||
* The reset period for each frame must be at least 50 uS; so we add in 50 bit-times
|
||||
* of zeroes at the end. (50 bits)*(1.25 uS/bit) = 62.5 uS, which gives us some
|
||||
* slack in the timing requirements
|
||||
*/
|
||||
#define WS2812_RESET_BIT_N (50)
|
||||
#define WS2812_COLOR_BIT_N (WS2812_LED_N*24) /**< Number of data bits */
|
||||
#define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */
|
||||
|
||||
/**
|
||||
* @brief High period for a zero, in ticks
|
||||
*
|
||||
* Per the datasheet:
|
||||
* WS2812:
|
||||
* - T0H: 200 nS to 500 nS, inclusive
|
||||
* - T0L: 650 nS to 950 nS, inclusive
|
||||
* WS2812B:
|
||||
* - T0H: 200 nS to 500 nS, inclusive
|
||||
* - T0L: 750 nS to 1050 nS, inclusive
|
||||
*
|
||||
* The duty cycle is calculated for a high period of 350 nS.
|
||||
*/
|
||||
#define WS2812_DUTYCYCLE_0 (WS2812_PWM_FREQUENCY/(1000000000/450))
|
||||
|
||||
/**
|
||||
* @brief High period for a one, in ticks
|
||||
*
|
||||
* Per the datasheet:
|
||||
* WS2812:
|
||||
* - T1H: 550 nS to 850 nS, inclusive
|
||||
* - T1L: 450 nS to 750 nS, inclusive
|
||||
* WS2812B:
|
||||
* - T1H: 750 nS to 1050 nS, inclusive
|
||||
* - T1L: 200 nS to 500 nS, inclusive
|
||||
*
|
||||
* The duty cycle is calculated for a high period of 800 nS.
|
||||
* This is in the middle of the specifications of the WS2812 and WS2812B.
|
||||
*/
|
||||
#define WS2812_DUTYCYCLE_1 (WS2812_PWM_FREQUENCY/(1000000000/900))
|
||||
|
||||
/* --- PRIVATE MACROS ------------------------------------------------------- */
|
||||
|
||||
/**
|
||||
* @brief Generates a reference to a numbered PWM driver
|
||||
*
|
||||
* @param[in] n: The driver (timer) number
|
||||
*
|
||||
* @return A reference to the driver
|
||||
*/
|
||||
#define PWMD(n) CONCAT_EXPANDED_SYMBOLS(PWMD, n)
|
||||
|
||||
#define WS2812_PWMD PWMD(WS2812_TIM_N) /**< The PWM driver to use for the LED chain */
|
||||
|
||||
/**
|
||||
* @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given bit
|
||||
*
|
||||
* @param[in] led: The led index [0, @ref WS2812_LED_N)
|
||||
* @param[in] byte: The byte number [0, 2]
|
||||
* @param[in] bit: The bit number [0, 7]
|
||||
*
|
||||
* @return The bit index
|
||||
*/
|
||||
#define WS2812_BIT(led, byte, bit) (24*(led) + 8*(byte) + (7 - (bit)))
|
||||
|
||||
/**
|
||||
* @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given red bit
|
||||
*
|
||||
* @note The red byte is the middle byte in the color packet
|
||||
*
|
||||
* @param[in] led: The led index [0, @ref WS2812_LED_N)
|
||||
* @param[in] bit: The bit number [0, 7]
|
||||
*
|
||||
* @return The bit index
|
||||
*/
|
||||
#define WS2812_RED_BIT(led, bit) WS2812_BIT((led), 1, (bit))
|
||||
|
||||
/**
|
||||
* @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given green bit
|
||||
*
|
||||
* @note The green byte is the first byte in the color packet
|
||||
*
|
||||
* @param[in] led: The led index [0, @ref WS2812_LED_N)
|
||||
* @param[in] bit: The bit number [0, 7]
|
||||
*
|
||||
* @return The bit index
|
||||
*/
|
||||
#define WS2812_GREEN_BIT(led, bit) WS2812_BIT((led), 0, (bit))
|
||||
|
||||
/**
|
||||
* @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given blue bit
|
||||
*
|
||||
* @note The blue byte is the last byte in the color packet
|
||||
*
|
||||
* @param[in] led: The led index [0, @ref WS2812_LED_N)
|
||||
* @param[in] bit: The bit index [0, 7]
|
||||
*
|
||||
* @return The bit index
|
||||
*/
|
||||
#define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 2, (bit))
|
||||
|
||||
/* --- PRIVATE VARIABLES ---------------------------------------------------- */
|
||||
|
||||
static uint32_t ws2812_frame_buffer[WS2812_BIT_N + 1]; /**< Buffer for a frame */
|
||||
|
||||
/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */
|
||||
/*
|
||||
* Gedanke: Double-buffer type transactions: double buffer transfers using two memory pointers for
|
||||
the memory (while the DMA is reading/writing from/to a buffer, the application can
|
||||
write/read to/from the other buffer).
|
||||
*/
|
||||
|
||||
void ws2812_init(void)
|
||||
{
|
||||
// Initialize led frame buffer
|
||||
uint32_t i;
|
||||
for (i = 0; i < WS2812_COLOR_BIT_N; i++) ws2812_frame_buffer[i] = WS2812_DUTYCYCLE_0; // All color bits are zero duty cycle
|
||||
for (i = 0; i < WS2812_RESET_BIT_N; i++) ws2812_frame_buffer[i + WS2812_COLOR_BIT_N] = 0; // All reset bits are zero
|
||||
// Configure pin as AF output. If there's an external pull up resistor the signal level is brought to 5V using open drain mode.
|
||||
#ifdef WS2812_EXTERNAL_PULLUP
|
||||
palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(WS2812_AF) | PAL_STM32_OTYPE_OPENDRAIN);
|
||||
#else
|
||||
palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(WS2812_AF) | PAL_STM32_OTYPE_PUSHPULL); //PAL_MODE_STM32_ALTERNATE_PUSHPULL);
|
||||
#endif
|
||||
//palClearPad(PORT_WS2812, PIN_WS2812);
|
||||
//wait_ms(1);
|
||||
// PWM Configuration
|
||||
#pragma GCC diagnostic ignored "-Woverride-init" // Turn off override-init warning for this struct. We use the overriding ability to set a "default" channel config
|
||||
static const PWMConfig ws2812_pwm_config = {
|
||||
.frequency = WS2812_PWM_FREQUENCY,
|
||||
.period = WS2812_PWM_PERIOD, //Mit dieser Periode wird UDE-Event erzeugt und ein neuer Wert (Länge WS2812_BIT_N) vom DMA ins CCR geschrieben
|
||||
.callback = NULL,
|
||||
.channels = {
|
||||
[0 ... 3] = {.mode = PWM_OUTPUT_DISABLED, .callback = NULL}, // Channels default to disabled
|
||||
[WS2812_TIM_CH] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL}, // Turn on the channel we care about
|
||||
},
|
||||
.cr2 = 0,
|
||||
.dier = TIM_DIER_UDE, // DMA on update event for next period
|
||||
};
|
||||
#pragma GCC diagnostic pop // Restore command-line warning options
|
||||
|
||||
// Configure DMA
|
||||
//dmaInit(); // Joe added this
|
||||
dmaStreamAllocate(WS2812_DMA_STREAM, 10, NULL, NULL);
|
||||
dmaStreamSetPeripheral(WS2812_DMA_STREAM, &(WS2812_PWMD.tim->CCR[WS2812_TIM_CH])); // Ziel ist der An-Zeit im Cap-Comp-Register
|
||||
dmaStreamSetMemory0(WS2812_DMA_STREAM, ws2812_frame_buffer);
|
||||
dmaStreamSetTransactionSize(WS2812_DMA_STREAM, WS2812_BIT_N);
|
||||
dmaStreamSetMode(WS2812_DMA_STREAM,
|
||||
STM32_DMA_CR_CHSEL(WS2812_DMA_CHANNEL) | STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD | STM32_DMA_CR_MSIZE_WORD |
|
||||
STM32_DMA_CR_MINC | STM32_DMA_CR_CIRC | STM32_DMA_CR_PL(3));
|
||||
// M2P: Memory 2 Periph; PL: Priority Level
|
||||
|
||||
// Start DMA
|
||||
dmaStreamEnable(WS2812_DMA_STREAM);
|
||||
|
||||
// Configure PWM
|
||||
// NOTE: It's required that preload be enabled on the timer channel CCR register. This is currently enabled in the
|
||||
// ChibiOS driver code, so we don't have to do anything special to the timer. If we did, we'd have to start the timer,
|
||||
// disable counting, enable the channel, and then make whatever configuration changes we need.
|
||||
pwmStart(&WS2812_PWMD, &ws2812_pwm_config);
|
||||
pwmEnableChannel(&WS2812_PWMD, WS2812_TIM_CH, 0); // Initial period is 0; output will be low until first duty cycle is DMA'd in
|
||||
}
|
||||
|
||||
ws2812_err_t ws2812_write_led(uint32_t led_number, uint8_t r, uint8_t g, uint8_t b)
|
||||
{
|
||||
// Check for valid LED
|
||||
if (led_number > WS2812_LED_N) return WS2812_LED_INVALID;
|
||||
|
||||
// Write color to frame buffer
|
||||
for (uint32_t bit = 0; bit < 8; bit++) {
|
||||
ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)] = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
|
||||
ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
|
||||
ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0;
|
||||
}
|
||||
|
||||
// Success
|
||||
return WS2812_SUCCESS;
|
||||
}
|
||||
|
||||
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds)
|
||||
{
|
||||
for(int i = 0; i < number_of_leds; i++) {
|
||||
ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b);
|
||||
}
|
||||
}
|
||||
|
||||
/** @} addtogroup WS2812 */
|
||||
@@ -0,0 +1,102 @@
|
||||
/**
|
||||
* @file ws2812.h
|
||||
* @author Austin Glaser <austin.glaser@gmail.com>
|
||||
* @brief Interface to WS2812 LED driver
|
||||
*
|
||||
* Copyright (C) 2016 Austin Glaser
|
||||
*
|
||||
* This software may be modified and distributed under the terms
|
||||
* of the MIT license. See the LICENSE file for details.
|
||||
*
|
||||
* @todo Put in names and descriptions of variables which need to be defined to use this file
|
||||
*/
|
||||
|
||||
#ifndef WS2812_H_
|
||||
#define WS2812_H_
|
||||
|
||||
/**
|
||||
* @defgroup WS2812 WS2812 Driver
|
||||
* @{
|
||||
*
|
||||
* @brief DMA-based WS2812 LED driver
|
||||
*
|
||||
* A driver for WS2812 LEDs
|
||||
*/
|
||||
|
||||
/* --- PUBLIC DEPENDENCIES -------------------------------------------------- */
|
||||
|
||||
// Standard
|
||||
#include <stdint.h>
|
||||
#include "color.h"
|
||||
|
||||
/* --- PUBLIC MACROS -------------------------------------------------------- */
|
||||
|
||||
/**
|
||||
* @brief Concatenates two symbols s1 and s2 exactly, without expanding either
|
||||
*
|
||||
* @param[in] s1: The first symbol to concatenate
|
||||
* @param[in] s2: The second symbol to concatenate
|
||||
*
|
||||
* @return A single symbol containing s1 and s2 concatenated without expansion
|
||||
*/
|
||||
#define CONCAT_SYMBOLS(s1, s2) s1##s2
|
||||
|
||||
/**
|
||||
* @brief Concatenate the symbols s1 and s2, expanding both of them
|
||||
*
|
||||
* This is important because simply applying s1##s2 doesn't expand them if they're
|
||||
* preprocessor tokens themselves
|
||||
*
|
||||
* @param[in] s1: The first symbol to concatenate
|
||||
* @param[in] s2: The second symbol to concatenate
|
||||
*
|
||||
* @return A single symbol containing s1 expanded followed by s2 expanded
|
||||
*/
|
||||
#define CONCAT_EXPANDED_SYMBOLS(s1, s2) CONCAT_SYMBOLS(s1, s2)
|
||||
|
||||
/* --- PUBLIC CONSTANTS ----------------------------------------------------- */
|
||||
|
||||
/**
|
||||
* @brief Return codes from ws2812 interface functions
|
||||
*/
|
||||
typedef enum {
|
||||
WS2812_SUCCESS = 0x00, /**< Operation completeed successfully */
|
||||
WS2812_LED_INVALID, /**< Attempted to index an invalid LED (@ref WS2812_N_LEDS) */
|
||||
MAX_WS2812_ERR, /**< Total number of possible error codes */
|
||||
WS2812_ERR_INVALID /**< Invalid error value */
|
||||
} ws2812_err_t;
|
||||
|
||||
/* --- PUBLIC FUNCTIONS ----------------------------------------------------- */
|
||||
|
||||
/**
|
||||
* @brief Initialize the driver
|
||||
*
|
||||
* After this function is called, all necessary background tasks will be started.
|
||||
* The frame is initially dark.
|
||||
*/
|
||||
void ws2812_init(void);
|
||||
|
||||
/**
|
||||
* @brief Write the value of a single LED in the chain
|
||||
*
|
||||
* The color value is written to a frame buffer, and will not
|
||||
* be updated until the next frame is written. Frames are written
|
||||
* at the maximum possible speed -- the longest latency between a
|
||||
* call to this function and the value being displayed is
|
||||
* 1.25uS*(24*@ref WS2812_LED_N + 50)
|
||||
*
|
||||
* @param[in] led_number: The index of the LED to be written. Must be strictly less than
|
||||
* @ref WS2812_N_LEDS
|
||||
* @param[in] r: The red level of the LED
|
||||
* @param[in] g: The green level of the LED
|
||||
* @param[in] b: The blue level of the LED
|
||||
*
|
||||
* @retval WS2812_SUCCESS: The write was successful
|
||||
* @retval WS2812_LED_INVALID: The write was to an invalid LED index
|
||||
*/
|
||||
ws2812_err_t ws2812_write_led(uint32_t led_number, uint8_t r, uint8_t g, uint8_t b);
|
||||
|
||||
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
|
||||
/** @} defgroup WS2812 */
|
||||
|
||||
#endif // ifndef WS2812_H_
|
||||
@@ -63,16 +63,16 @@
|
||||
#define gbp A(KC_3)
|
||||
|
||||
#define down KC_DOWN
|
||||
#define home KC_HOME
|
||||
#define end KC_END
|
||||
#define home G(KC_LEFT)
|
||||
#define end G(KC_RGHT)
|
||||
#define up KC_UP
|
||||
#define pgdn KC_PGDN
|
||||
#define pgup KC_PGUP
|
||||
#define left KC_LEFT
|
||||
#define rght KC_RGHT
|
||||
|
||||
#define tabl S(C(KC_TAB))
|
||||
#define tabr C(KC_TAB)
|
||||
#define tabl G(S(KC_LBRC))
|
||||
#define tabr G(S(KC_RBRC))
|
||||
#define fwd G(KC_RBRC)
|
||||
#define back G(KC_LBRC)
|
||||
#define dtl C(KC_LEFT)
|
||||
@@ -162,8 +162,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[SYMB] = LAYOUT_planck_grid(
|
||||
esc, n7, n5, n3, n1, n9, n8, n0, n2, n4, n6, dash,
|
||||
del, bsls, hash, astr, eql, pipe, at, rprn, lprn, dlr, ampr, gbp,
|
||||
caps, grv, exlm, lbrc, rbrc, circ, tild, rcbr, lcbr, plus, perc, caps,
|
||||
del, at, dlr, eql, lprn, lbrc, rbrc, rprn, astr, hash, plus, gbp,
|
||||
caps, grv, pipe, bsls, lcbr, tild, circ, rcbr, ampr, exlm, perc, caps,
|
||||
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____
|
||||
),
|
||||
|
||||
|
||||
@@ -28,7 +28,7 @@ This is a layout for the grid planck, built with a few ideals in mind:
|
||||
|
||||
Layout rendered with [keyboard-layout-editor.com][]:
|
||||
|
||||
|
||||
|
||||
|
||||
The only behaviour not captured in this graphic is: pressing both cmd keys will
|
||||
send cmd+ctrl. See [keymap.c][] for details.
|
||||
|
||||
@@ -0,0 +1,22 @@
|
||||
/* Copyright 2018 Carlos Filoteo
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#define TAPPING_TERM 150
|
||||
#define PERMISSIVE_HOLD
|
||||
#define IGNORE_MOD_TAP_INTERRUPT
|
||||
|
||||
// place overrides here
|
||||
@@ -0,0 +1,99 @@
|
||||
/* Copyright 2018 Carlos Filoteo
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "hvp.c"
|
||||
|
||||
#define LT3_ESC LT(3, KC_ESC)
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Base Layer
|
||||
* ,-------------------------------------------------------------------------.
|
||||
* | Esc | Q | W | E | R | T | Y | U | I | O | P |Bspace |
|
||||
* |-------------------------------------------------------------------------+
|
||||
* |Tab/L3| A | S | D | F | G | H | J | K | L | ; | ' |
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | Shift | Z | X | C | V | B | N | M | , | . | / |Sh/En|
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | Ctrl| Alt | Gui | App | L2 | Space | L1 | Left| Down| Up |Right|
|
||||
* `-------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
LAYOUT(
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
|
||||
LT3_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, TD(TD1), TD(TD2),
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, TD(TD3), KC_SFTENT,
|
||||
KC_LCTL, KC_APP, KC_LGUI, KC_LALT, MO(2), MT(MOD_LSFT, KC_SPC), MO(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT
|
||||
),
|
||||
|
||||
/* FN Layer 1
|
||||
* ,-------------------------------------------------------------------------.
|
||||
* | ` ~ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Delete|
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | | | | | | | | - | = | [ | ] | \ |
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | | F11 | F12 | F13 | F14 | F15 | F16 | F17 | F18 | F19 | F20 | |
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | | | |Capsl| | | | Home| PgDn| PgUp| End |
|
||||
* `-------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
LAYOUT( /* Right */
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
|
||||
KC_DELETE, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||
_______, _______, _______, RGB_HUD, RGB_HUI, _______, _______, _______, _______, _______, _______, _______,
|
||||
KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
|
||||
),
|
||||
|
||||
/* FN Layer 2
|
||||
* ,-------------------------------------------------------------------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) |Delete|
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | | | | | | | | _ | + | { | } | | |
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | |
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | | | |Capsl| | | | Home| PgDn| PgUp| End |
|
||||
* `-------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
LAYOUT( /* Left */
|
||||
KC_TILDE, KC_EXCLAIM, KC_AT, KC_HASH, KC_DOLLAR, KC_PERCENT, KC_CIRCUMFLEX, KC_AMPERSAND, KC_ASTERISK, KC_LEFT_PAREN, KC_RIGHT_PAREN, KC_BSPC,
|
||||
KC_DELETE, _______, _______, _______, _______, _______, _______, KC_UNDERSCORE, KC_PLUS, KC_LEFT_CURLY_BRACE, KC_RIGHT_CURLY_BRACE, KC_PIPE,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END
|
||||
),
|
||||
|
||||
/* FN Layer 2
|
||||
* ,-------------------------------------------------------------------------.
|
||||
* | Esc | Calc|Webhm| Mail| Comp| | | | | |PrtSc| |
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | | | | | | | | | | | | |
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | | | | | | | | | | | | |
|
||||
* |-------------------------------------------------------------------------+
|
||||
* | | | | | | | |MousL|MousD|MousU|MousR|
|
||||
* `-------------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
LAYOUT( /* Tab */
|
||||
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
|
||||
_______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, KC_PSCR,
|
||||
_______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______,
|
||||
RESET, _______, _______, _______, KC_MUTE, KC_MPLY, KC_MSTP, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT
|
||||
),
|
||||
};
|
||||
@@ -0,0 +1,5 @@
|
||||
# UT47 default keymap
|
||||
|
||||
|
||||
|
||||
[KLE](http://www.keyboard-layout-editor.com/##@@_y:0%3B&=Esc&=Q&=W&=E&=R&=T&=Y&=U&=I&=O&=P&_w:1.5%3B&=Back%20Space&_x:0.25&a:4&f:4&w:4&h:4&d:true%3B&=%3Cb%3EGNAP!%3C%2F%2Fb%3E%3Cp%3E%3Cp%3EMinimum%20stagger%3Cp%3E47%20key%20layout%3B&@_a:7&f:3&w:1.25%3B&=Tab&=A&=S&=D&=F&=G&=H&=J&=K&=L&=%2F%3B&_w:1.25%3B&=%27%3B&@_w:1.5%3B&=Shift&=Z&=X&=C&=V&=B&=N&=M&=,&=.&=%2F%2F&=Return%3B&@=Ctrl&=Alt&=Super&=Menu&_w:1.25%3B&=%2F&dArr%2F%3B&_w:2%3B&=&_w:1.25%3B&=%2F&uArr%2F%3B&=%2F&larr%2F%3B&=%2F&darr%2F%3B&=%2F&uarr%2F%3B&=%2F&rarr%2F%3B%3B&=undefined)
|
||||
@@ -0,0 +1 @@
|
||||
TAP_DANCE_ENABLE = yes
|
||||
@@ -1,21 +1,19 @@
|
||||
"""Serve QMK documentation locally
|
||||
"""
|
||||
import http.server
|
||||
import os
|
||||
|
||||
from milc import cli
|
||||
|
||||
|
||||
class DocsHandler(http.server.SimpleHTTPRequestHandler):
|
||||
def __init__(self, *args, **kwargs):
|
||||
super().__init__(*args, directory='docs', **kwargs)
|
||||
|
||||
|
||||
@cli.argument('-p', '--port', default=8936, type=int, help='Port number to use.')
|
||||
@cli.subcommand('Run a local webserver for QMK documentation.')
|
||||
def docs(cli):
|
||||
"""Spin up a local HTTPServer instance for the QMK docs.
|
||||
"""
|
||||
with http.server.HTTPServer(('', cli.config.docs.port), DocsHandler) as httpd:
|
||||
os.chdir('docs')
|
||||
|
||||
with http.server.HTTPServer(('', cli.config.docs.port), http.server.SimpleHTTPRequestHandler) as httpd:
|
||||
cli.log.info("Serving QMK docs at http://localhost:%d/", cli.config.docs.port)
|
||||
cli.log.info("Press Control+C to exit.")
|
||||
|
||||
|
||||
@@ -39,7 +39,7 @@ def doctor(cli):
|
||||
ok = False
|
||||
|
||||
# Determine our OS and run platform specific tests
|
||||
OS = platform.system()
|
||||
OS = platform.system() # noqa (N806), uppercase name is ok in this instance
|
||||
|
||||
if OS == "Darwin":
|
||||
cli.log.info("Detected {fg_cyan}macOS.")
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
from qmk.errors import NoSuchKeyboardError
|
||||
|
||||
|
||||
def test_NoSuchKeyboardError():
|
||||
def test_nosuchkeyboarderror():
|
||||
try:
|
||||
raise NoSuchKeyboardError("test message")
|
||||
except NoSuchKeyboardError as e:
|
||||
|
||||
+11
-25
@@ -37,16 +37,15 @@ static pin_t encoders_pad_b[] = ENCODERS_PAD_B;
|
||||
|
||||
static int8_t encoder_LUT[] = {0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, 0};
|
||||
|
||||
static uint8_t encoder_state[NUMBER_OF_ENCODERS] = {0};
|
||||
static int8_t encoder_pulses[NUMBER_OF_ENCODERS] = {0};
|
||||
static uint8_t encoder_state[NUMBER_OF_ENCODERS] = {0};
|
||||
|
||||
#ifdef SPLIT_KEYBOARD
|
||||
// right half encoders come over as second set of encoders
|
||||
static uint8_t encoder_value[NUMBER_OF_ENCODERS * 2] = {0};
|
||||
static int8_t encoder_value[NUMBER_OF_ENCODERS * 2] = {0};
|
||||
// row offsets for each hand
|
||||
static uint8_t thisHand, thatHand;
|
||||
#else
|
||||
static uint8_t encoder_value[NUMBER_OF_ENCODERS] = {0};
|
||||
static int8_t encoder_value[NUMBER_OF_ENCODERS] = {0};
|
||||
#endif
|
||||
|
||||
__attribute__((weak)) void encoder_update_user(int8_t index, bool clockwise) {}
|
||||
@@ -79,16 +78,14 @@ void encoder_init(void) {
|
||||
}
|
||||
|
||||
static void encoder_update(int8_t index, uint8_t state) {
|
||||
encoder_pulses[index] += encoder_LUT[state & 0xF];
|
||||
if (encoder_pulses[index] >= ENCODER_RESOLUTION) {
|
||||
encoder_value[index]++;
|
||||
encoder_update_kb(index, true);
|
||||
}
|
||||
if (encoder_pulses[index] <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise
|
||||
encoder_value[index]--;
|
||||
encoder_value[index] += encoder_LUT[state & 0xF];
|
||||
if (encoder_value[index] >= ENCODER_RESOLUTION) {
|
||||
encoder_update_kb(index, false);
|
||||
}
|
||||
encoder_pulses[index] %= ENCODER_RESOLUTION;
|
||||
if (encoder_value[index] <= -ENCODER_RESOLUTION) { // direction is arbitrary here, but this clockwise
|
||||
encoder_update_kb(index, true);
|
||||
}
|
||||
encoder_value[index] %= ENCODER_RESOLUTION;
|
||||
}
|
||||
|
||||
void encoder_read(void) {
|
||||
@@ -104,22 +101,11 @@ void encoder_read(void) {
|
||||
}
|
||||
|
||||
#ifdef SPLIT_KEYBOARD
|
||||
void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, &encoder_value[thisHand], sizeof(uint8_t) * NUMBER_OF_ENCODERS); }
|
||||
void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, encoder_state, sizeof(encoder_state)); }
|
||||
|
||||
void encoder_update_raw(uint8_t* slave_state) {
|
||||
for (int i = 0; i < NUMBER_OF_ENCODERS; i++) {
|
||||
uint8_t index = i + thatHand;
|
||||
int8_t delta = slave_state[i] - encoder_value[index];
|
||||
while (delta > 0) {
|
||||
delta--;
|
||||
encoder_value[index]++;
|
||||
encoder_update_kb(index, true);
|
||||
}
|
||||
while (delta < 0) {
|
||||
delta++;
|
||||
encoder_value[index]--;
|
||||
encoder_update_kb(index, false);
|
||||
}
|
||||
encoder_update(i + thatHand, slave_state[i]);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
@@ -52,9 +52,6 @@ action_t action_for_key(uint8_t layer, keypos_t key) {
|
||||
uint8_t action_layer, when, mod;
|
||||
|
||||
switch (keycode) {
|
||||
case KC_FN0 ... KC_FN31:
|
||||
action.code = keymap_function_id_to_action(FN_INDEX(keycode));
|
||||
break;
|
||||
case KC_A ... KC_EXSEL:
|
||||
case KC_LCTRL ... KC_RGUI:
|
||||
action.code = ACTION_KEY(keycode);
|
||||
@@ -65,9 +62,11 @@ action_t action_for_key(uint8_t layer, keypos_t key) {
|
||||
case KC_AUDIO_MUTE ... KC_BRIGHTNESS_DOWN:
|
||||
action.code = ACTION_USAGE_CONSUMER(KEYCODE2CONSUMER(keycode));
|
||||
break;
|
||||
#ifdef MOUSEKEY_ENABLE
|
||||
case KC_MS_UP ... KC_MS_ACCEL2:
|
||||
action.code = ACTION_MOUSEKEY(keycode);
|
||||
break;
|
||||
#endif
|
||||
case KC_TRNS:
|
||||
action.code = ACTION_TRANSPARENT;
|
||||
break;
|
||||
@@ -76,17 +75,24 @@ action_t action_for_key(uint8_t layer, keypos_t key) {
|
||||
// Split it up
|
||||
action.code = ACTION_MODS_KEY(keycode >> 8, keycode & 0xFF); // adds modifier to key
|
||||
break;
|
||||
#ifndef NO_ACTION_FUNCTION
|
||||
case KC_FN0 ... KC_FN31:
|
||||
action.code = keymap_function_id_to_action(FN_INDEX(keycode));
|
||||
break;
|
||||
case QK_FUNCTION ... QK_FUNCTION_MAX:;
|
||||
// Is a shortcut for function action_layer, pull last 12bits
|
||||
// This means we have 4,096 FN macros at our disposal
|
||||
action.code = keymap_function_id_to_action((int)keycode & 0xFFF);
|
||||
break;
|
||||
#endif
|
||||
#ifndef NO_ACTION_MACRO
|
||||
case QK_MACRO ... QK_MACRO_MAX:
|
||||
if (keycode & 0x800) // tap macros have upper bit set
|
||||
action.code = ACTION_MACRO_TAP(keycode & 0xFF);
|
||||
else
|
||||
action.code = ACTION_MACRO(keycode & 0xFF);
|
||||
break;
|
||||
#endif
|
||||
case QK_LAYER_TAP ... QK_LAYER_TAP_MAX:
|
||||
action.code = ACTION_LAYER_TAP_KEY((keycode >> 0x8) & 0xF, keycode & 0xFF);
|
||||
break;
|
||||
|
||||
+137
-191
@@ -164,11 +164,6 @@ void reset_keyboard(void) {
|
||||
bootloader_jump();
|
||||
}
|
||||
|
||||
/* true if the last press of GRAVE_ESC was shifted (i.e. GUI or SHIFT were pressed), false otherwise.
|
||||
* Used to ensure that the correct keycode is released if the key is released.
|
||||
*/
|
||||
static bool grave_esc_was_shifted = false;
|
||||
|
||||
/* Convert record into usable keycode via the contained event. */
|
||||
uint16_t get_record_keycode(keyrecord_t *record) { return get_event_keycode(record->event); }
|
||||
|
||||
@@ -276,259 +271,213 @@ bool process_record_quantum(keyrecord_t *record) {
|
||||
return false;
|
||||
}
|
||||
|
||||
// Shift / paren setup
|
||||
|
||||
switch (keycode) {
|
||||
case RESET:
|
||||
if (record->event.pressed) {
|
||||
if (record->event.pressed) {
|
||||
switch (keycode) {
|
||||
case RESET:
|
||||
reset_keyboard();
|
||||
}
|
||||
return false;
|
||||
case DEBUG:
|
||||
if (record->event.pressed) {
|
||||
return false;
|
||||
#ifndef NO_DEBUG
|
||||
case DEBUG:
|
||||
debug_enable ^= 1;
|
||||
if (debug_enable) {
|
||||
print("DEBUG: enabled.\n");
|
||||
} else {
|
||||
print("DEBUG: disabled.\n");
|
||||
}
|
||||
}
|
||||
return false;
|
||||
case EEPROM_RESET:
|
||||
if (record->event.pressed) {
|
||||
eeconfig_init();
|
||||
}
|
||||
return false;
|
||||
#ifdef FAUXCLICKY_ENABLE
|
||||
case FC_TOG:
|
||||
if (record->event.pressed) {
|
||||
FAUXCLICKY_TOGGLE;
|
||||
}
|
||||
return false;
|
||||
case FC_ON:
|
||||
if (record->event.pressed) {
|
||||
FAUXCLICKY_ON;
|
||||
}
|
||||
return false;
|
||||
case FC_OFF:
|
||||
if (record->event.pressed) {
|
||||
FAUXCLICKY_OFF;
|
||||
}
|
||||
return false;
|
||||
#endif
|
||||
return false;
|
||||
case EEPROM_RESET:
|
||||
eeconfig_init();
|
||||
return false;
|
||||
#ifdef FAUXCLICKY_ENABLE
|
||||
case FC_TOG:
|
||||
FAUXCLICKY_TOGGLE;
|
||||
return false;
|
||||
case FC_ON:
|
||||
FAUXCLICKY_ON;
|
||||
return false;
|
||||
case FC_OFF:
|
||||
FAUXCLICKY_OFF;
|
||||
return false;
|
||||
#endif
|
||||
#ifdef VELOCIKEY_ENABLE
|
||||
case VLK_TOG:
|
||||
velocikey_toggle();
|
||||
return false;
|
||||
#endif
|
||||
#ifdef BLUETOOTH_ENABLE
|
||||
case OUT_AUTO:
|
||||
set_output(OUTPUT_AUTO);
|
||||
return false;
|
||||
case OUT_USB:
|
||||
set_output(OUTPUT_USB);
|
||||
return false;
|
||||
case OUT_BT:
|
||||
set_output(OUTPUT_BLUETOOTH);
|
||||
return false;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
|
||||
case RGB_TOG:
|
||||
// Split keyboards need to trigger on key-up for edge-case issue
|
||||
# ifndef SPLIT_KEYBOARD
|
||||
if (record->event.pressed) {
|
||||
if (record->event.pressed) {
|
||||
# else
|
||||
if (!record->event.pressed) {
|
||||
// Split keyboards need to trigger on key-up for edge-case issue
|
||||
if (!record->event.pressed) {
|
||||
# endif
|
||||
uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
|
||||
switch (keycode) {
|
||||
case RGB_TOG:
|
||||
rgblight_toggle();
|
||||
}
|
||||
return false;
|
||||
case RGB_MODE_FORWARD:
|
||||
if (record->event.pressed) {
|
||||
uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
|
||||
return false;
|
||||
case RGB_MODE_FORWARD:
|
||||
if (shifted) {
|
||||
rgblight_step_reverse();
|
||||
} else {
|
||||
rgblight_step();
|
||||
}
|
||||
}
|
||||
return false;
|
||||
case RGB_MODE_REVERSE:
|
||||
if (record->event.pressed) {
|
||||
uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT));
|
||||
return false;
|
||||
case RGB_MODE_REVERSE:
|
||||
if (shifted) {
|
||||
rgblight_step();
|
||||
} else {
|
||||
rgblight_step_reverse();
|
||||
}
|
||||
}
|
||||
return false;
|
||||
case RGB_HUI:
|
||||
// Split keyboards need to trigger on key-up for edge-case issue
|
||||
# ifndef SPLIT_KEYBOARD
|
||||
if (record->event.pressed) {
|
||||
# else
|
||||
if (!record->event.pressed) {
|
||||
# endif
|
||||
rgblight_increase_hue();
|
||||
}
|
||||
return false;
|
||||
case RGB_HUD:
|
||||
// Split keyboards need to trigger on key-up for edge-case issue
|
||||
# ifndef SPLIT_KEYBOARD
|
||||
if (record->event.pressed) {
|
||||
# else
|
||||
if (!record->event.pressed) {
|
||||
# endif
|
||||
rgblight_decrease_hue();
|
||||
}
|
||||
return false;
|
||||
case RGB_SAI:
|
||||
// Split keyboards need to trigger on key-up for edge-case issue
|
||||
# ifndef SPLIT_KEYBOARD
|
||||
if (record->event.pressed) {
|
||||
# else
|
||||
if (!record->event.pressed) {
|
||||
# endif
|
||||
rgblight_increase_sat();
|
||||
}
|
||||
return false;
|
||||
case RGB_SAD:
|
||||
// Split keyboards need to trigger on key-up for edge-case issue
|
||||
# ifndef SPLIT_KEYBOARD
|
||||
if (record->event.pressed) {
|
||||
# else
|
||||
if (!record->event.pressed) {
|
||||
# endif
|
||||
rgblight_decrease_sat();
|
||||
}
|
||||
return false;
|
||||
case RGB_VAI:
|
||||
// Split keyboards need to trigger on key-up for edge-case issue
|
||||
# ifndef SPLIT_KEYBOARD
|
||||
if (record->event.pressed) {
|
||||
# else
|
||||
if (!record->event.pressed) {
|
||||
# endif
|
||||
rgblight_increase_val();
|
||||
}
|
||||
return false;
|
||||
case RGB_VAD:
|
||||
// Split keyboards need to trigger on key-up for edge-case issue
|
||||
# ifndef SPLIT_KEYBOARD
|
||||
if (record->event.pressed) {
|
||||
# else
|
||||
if (!record->event.pressed) {
|
||||
# endif
|
||||
rgblight_decrease_val();
|
||||
}
|
||||
return false;
|
||||
case RGB_SPI:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_speed();
|
||||
}
|
||||
return false;
|
||||
case RGB_SPD:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_speed();
|
||||
}
|
||||
return false;
|
||||
case RGB_MODE_PLAIN:
|
||||
if (record->event.pressed) {
|
||||
return false;
|
||||
case RGB_HUI:
|
||||
if (shifted) {
|
||||
rgblight_decrease_hue();
|
||||
} else {
|
||||
rgblight_increase_hue();
|
||||
}
|
||||
return false;
|
||||
case RGB_HUD:
|
||||
if (shifted) {
|
||||
rgblight_increase_hue();
|
||||
} else {
|
||||
rgblight_decrease_hue();
|
||||
}
|
||||
return false;
|
||||
case RGB_SAI:
|
||||
if (shifted) {
|
||||
rgblight_decrease_sat();
|
||||
} else {
|
||||
rgblight_increase_sat();
|
||||
}
|
||||
return false;
|
||||
case RGB_SAD:
|
||||
if (shifted) {
|
||||
rgblight_increase_sat();
|
||||
} else {
|
||||
rgblight_decrease_sat();
|
||||
}
|
||||
return false;
|
||||
case RGB_VAI:
|
||||
if (shifted) {
|
||||
rgblight_decrease_val();
|
||||
} else {
|
||||
rgblight_increase_val();
|
||||
}
|
||||
return false;
|
||||
case RGB_VAD:
|
||||
if (shifted) {
|
||||
rgblight_increase_val();
|
||||
} else {
|
||||
rgblight_decrease_val();
|
||||
}
|
||||
return false;
|
||||
case RGB_SPI:
|
||||
if (shifted) {
|
||||
rgblight_decrease_speed();
|
||||
} else {
|
||||
rgblight_increase_speed();
|
||||
}
|
||||
return false;
|
||||
case RGB_SPD:
|
||||
if (shifted) {
|
||||
rgblight_increase_speed();
|
||||
} else {
|
||||
rgblight_decrease_speed();
|
||||
}
|
||||
return false;
|
||||
case RGB_MODE_PLAIN:
|
||||
rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT);
|
||||
}
|
||||
return false;
|
||||
case RGB_MODE_BREATHE:
|
||||
return false;
|
||||
case RGB_MODE_BREATHE:
|
||||
# ifdef RGBLIGHT_EFFECT_BREATHING
|
||||
if (record->event.pressed) {
|
||||
if ((RGBLIGHT_MODE_BREATHING <= rgblight_get_mode()) && (rgblight_get_mode() < RGBLIGHT_MODE_BREATHING_end)) {
|
||||
rgblight_step();
|
||||
} else {
|
||||
rgblight_mode(RGBLIGHT_MODE_BREATHING);
|
||||
}
|
||||
}
|
||||
# endif
|
||||
return false;
|
||||
return false;
|
||||
case RGB_MODE_RAINBOW:
|
||||
# ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
if (record->event.pressed) {
|
||||
if ((RGBLIGHT_MODE_RAINBOW_MOOD <= rgblight_get_mode()) && (rgblight_get_mode() < RGBLIGHT_MODE_RAINBOW_MOOD_end)) {
|
||||
rgblight_step();
|
||||
} else {
|
||||
rgblight_mode(RGBLIGHT_MODE_RAINBOW_MOOD);
|
||||
}
|
||||
}
|
||||
# endif
|
||||
return false;
|
||||
case RGB_MODE_SWIRL:
|
||||
case RGB_MODE_SWIRL:
|
||||
# ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
if (record->event.pressed) {
|
||||
if ((RGBLIGHT_MODE_RAINBOW_SWIRL <= rgblight_get_mode()) && (rgblight_get_mode() < RGBLIGHT_MODE_RAINBOW_SWIRL_end)) {
|
||||
rgblight_step();
|
||||
} else {
|
||||
rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL);
|
||||
}
|
||||
}
|
||||
# endif
|
||||
return false;
|
||||
case RGB_MODE_SNAKE:
|
||||
return false;
|
||||
case RGB_MODE_SNAKE:
|
||||
# ifdef RGBLIGHT_EFFECT_SNAKE
|
||||
if (record->event.pressed) {
|
||||
if ((RGBLIGHT_MODE_SNAKE <= rgblight_get_mode()) && (rgblight_get_mode() < RGBLIGHT_MODE_SNAKE_end)) {
|
||||
rgblight_step();
|
||||
} else {
|
||||
rgblight_mode(RGBLIGHT_MODE_SNAKE);
|
||||
}
|
||||
}
|
||||
# endif
|
||||
return false;
|
||||
case RGB_MODE_KNIGHT:
|
||||
return false;
|
||||
case RGB_MODE_KNIGHT:
|
||||
# ifdef RGBLIGHT_EFFECT_KNIGHT
|
||||
if (record->event.pressed) {
|
||||
if ((RGBLIGHT_MODE_KNIGHT <= rgblight_get_mode()) && (rgblight_get_mode() < RGBLIGHT_MODE_KNIGHT_end)) {
|
||||
rgblight_step();
|
||||
} else {
|
||||
rgblight_mode(RGBLIGHT_MODE_KNIGHT);
|
||||
}
|
||||
}
|
||||
# endif
|
||||
return false;
|
||||
case RGB_MODE_XMAS:
|
||||
return false;
|
||||
case RGB_MODE_XMAS:
|
||||
# ifdef RGBLIGHT_EFFECT_CHRISTMAS
|
||||
if (record->event.pressed) {
|
||||
rgblight_mode(RGBLIGHT_MODE_CHRISTMAS);
|
||||
}
|
||||
# endif
|
||||
return false;
|
||||
case RGB_MODE_GRADIENT:
|
||||
return false;
|
||||
case RGB_MODE_GRADIENT:
|
||||
# ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
if (record->event.pressed) {
|
||||
if ((RGBLIGHT_MODE_STATIC_GRADIENT <= rgblight_get_mode()) && (rgblight_get_mode() < RGBLIGHT_MODE_STATIC_GRADIENT_end)) {
|
||||
rgblight_step();
|
||||
} else {
|
||||
rgblight_mode(RGBLIGHT_MODE_STATIC_GRADIENT);
|
||||
}
|
||||
}
|
||||
# endif
|
||||
return false;
|
||||
case RGB_MODE_RGBTEST:
|
||||
return false;
|
||||
case RGB_MODE_RGBTEST:
|
||||
# ifdef RGBLIGHT_EFFECT_RGB_TEST
|
||||
if (record->event.pressed) {
|
||||
rgblight_mode(RGBLIGHT_MODE_RGB_TEST);
|
||||
}
|
||||
# endif
|
||||
return false;
|
||||
#endif // defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
|
||||
#ifdef VELOCIKEY_ENABLE
|
||||
case VLK_TOG:
|
||||
if (record->event.pressed) {
|
||||
velocikey_toggle();
|
||||
}
|
||||
return false;
|
||||
return false;
|
||||
#if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_BREATHING)
|
||||
case BL_BRTG:
|
||||
backlight_toggle_breathing();
|
||||
return false;
|
||||
#endif
|
||||
#ifdef PROTOCOL_LUFA
|
||||
case OUT_AUTO:
|
||||
if (record->event.pressed) {
|
||||
set_output(OUTPUT_AUTO);
|
||||
}
|
||||
return false;
|
||||
case OUT_USB:
|
||||
if (record->event.pressed) {
|
||||
set_output(OUTPUT_USB);
|
||||
}
|
||||
return false;
|
||||
# ifdef BLUETOOTH_ENABLE
|
||||
case OUT_BT:
|
||||
if (record->event.pressed) {
|
||||
set_output(OUTPUT_BLUETOOTH);
|
||||
}
|
||||
return false;
|
||||
# endif
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
// keycodes that depend on both pressed and non-pressed state
|
||||
switch (keycode) {
|
||||
case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_ALT_GUI:
|
||||
case MAGIC_SWAP_LCTL_LGUI ... MAGIC_EE_HANDS_RIGHT:
|
||||
if (record->event.pressed) {
|
||||
@@ -668,6 +617,11 @@ bool process_record_quantum(keyrecord_t *record) {
|
||||
break;
|
||||
|
||||
case GRAVE_ESC: {
|
||||
/* true if the last press of GRAVE_ESC was shifted (i.e. GUI or SHIFT were pressed), false otherwise.
|
||||
* Used to ensure that the correct keycode is released if the key is released.
|
||||
*/
|
||||
static bool grave_esc_was_shifted = false;
|
||||
|
||||
uint8_t shifted = get_mods() & ((MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)));
|
||||
|
||||
#ifdef GRAVE_ESC_ALT_OVERRIDE
|
||||
@@ -711,14 +665,6 @@ bool process_record_quantum(keyrecord_t *record) {
|
||||
return false;
|
||||
}
|
||||
|
||||
#if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_BREATHING)
|
||||
case BL_BRTG: {
|
||||
if (record->event.pressed) {
|
||||
backlight_toggle_breathing();
|
||||
}
|
||||
return false;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
return process_action_kb(record);
|
||||
|
||||
@@ -6,3 +6,4 @@ colorama
|
||||
hjson
|
||||
nose2
|
||||
flake8
|
||||
pep8-naming
|
||||
|
||||
@@ -6,7 +6,14 @@
|
||||
#define KC_NP KC_NO // key is not present
|
||||
#define KC_NA KC_NO // present but not available for use
|
||||
#define KC_NU KC_NO // available but not used
|
||||
|
||||
// non-KC_ keycodes
|
||||
#define KC_RST RESET
|
||||
#define KC_TOG RGB_TOG
|
||||
#define KC_MOD RGB_MOD
|
||||
#define KC_HUI RGB_HUI
|
||||
#define KC_SAI RGB_SAI
|
||||
#define KC_VAI RGB_VAI
|
||||
|
||||
enum layers { BASE, MEDR, NAVR, MOUR, NSSL, NSL, FUNL };
|
||||
|
||||
@@ -30,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
KC_NP, KC_NP, KC_NA, KC_NA, KC_NA, KC_BTN3, KC_BTN1, KC_BTN2, KC_NP, KC_NP
|
||||
),
|
||||
[MEDR] = LAYOUT_miryoku(
|
||||
KC_RST, KC_NA, KC_NA, KC_NA, KC_NA, KC_NU, KC_NU, KC_NU, KC_NU, KC_NU,
|
||||
KC_RST, KC_NA, KC_NA, KC_NA, KC_NA, KC_TOG, KC_MOD, KC_HUI, KC_SAI, KC_VAI,
|
||||
KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_NA, KC_NU, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT,
|
||||
KC_NA, KC_ALGR, KC_NA, KC_NA, KC_NA, KC_NU, KC_NU, KC_NU, KC_NU, KC_NU,
|
||||
KC_NP, KC_NP, KC_NA, KC_NA, KC_NA, KC_MSTP, KC_MPLY, KC_MUTE, KC_NP, KC_NP
|
||||
|
||||
@@ -134,11 +134,12 @@ the home position. Unused keys are available for other related functions.
|
||||
*** Media (MEDR)
|
||||
|
||||
Tertiary RH layer is media control, with volume up / down and next / prev
|
||||
mirroring the navigation keys. Pause, stop and mute are on thumbs. Unused keys
|
||||
are available for other related functions.
|
||||
mirroring the navigation keys. Pause, stop and mute are on thumbs. RGB control
|
||||
is on the top row (combine with shift to invert). Unused keys are available for
|
||||
other related functions.
|
||||
|
||||
#+NAME: medr
|
||||
| | | | | |
|
||||
| TOG | MOD | HUI | SAI | VAI |
|
||||
| | MPRV | VOLD | VOLU | MNXT |
|
||||
| | | | | |
|
||||
| MSTP | MPLY | MUTE | NP | NP |
|
||||
@@ -413,7 +414,14 @@ Contains the keymap. Included from keymap.c
|
||||
#define KC_NP KC_NO // key is not present
|
||||
#define KC_NA KC_NO // present but not available for use
|
||||
#define KC_NU KC_NO // available but not used
|
||||
|
||||
// non-KC_ keycodes
|
||||
#define KC_RST RESET
|
||||
#define KC_TOG RGB_TOG
|
||||
#define KC_MOD RGB_MOD
|
||||
#define KC_HUI RGB_HUI
|
||||
#define KC_SAI RGB_SAI
|
||||
#define KC_VAI RGB_VAI
|
||||
|
||||
<<table-enums()>>
|
||||
|
||||
@@ -464,6 +472,7 @@ Build options. Automatically included.
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
|
||||
|
||||
#+END_SRC
|
||||
|
||||
|
||||
@@ -561,11 +570,12 @@ To use the keymap on a keyboard which does not support the layouts feature,
|
||||
LAYOUT_miryoku is defined as a macro mapping onto the keyboard's own LAYOUT
|
||||
macro, leaving the unused keys as KC_NO. The userspace keymap is then included.
|
||||
|
||||
|
||||
*** crkbd
|
||||
|
||||
The outer columns are unused.
|
||||
|
||||
**** keymap.c
|
||||
|
||||
[[../../keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c][keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c]]
|
||||
#+BEGIN_SRC C :noweb yes :tangle ../../keyboards/crkbd/keymaps/manna-harbour_miryoku/keymap.c
|
||||
|
||||
@@ -588,10 +598,48 @@ KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_
|
||||
|
||||
#+END_SRC
|
||||
|
||||
|
||||
**** config.h
|
||||
|
||||
[[../../keyboards/crkbd/keymaps/manna-harbour_miryoku/config.h][keyboards/crkbd/keymaps/manna-harbour_miryoku/config.h]]
|
||||
#+BEGIN_SRC C :noweb yes :tangle ../../keyboards/crkbd/keymaps/manna-harbour_miryoku/config.h
|
||||
|
||||
// <<header>>
|
||||
|
||||
#pragma once
|
||||
|
||||
#define EE_HANDS
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses
|
||||
#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
|
||||
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
||||
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
|
||||
#define RGB_MATRIX_HUE_STEP 8
|
||||
#define RGB_MATRIX_SAT_STEP 8
|
||||
#define RGB_MATRIX_VAL_STEP 8
|
||||
#define RGB_MATRIX_SPD_STEP 10
|
||||
#endif
|
||||
|
||||
#+END_SRC
|
||||
|
||||
|
||||
**** rules.mk
|
||||
|
||||
[[../../keyboards/crkbd/keymaps/manna-harbour_miryoku/rules.mk][keyboards/crkbd/keymaps/manna-harbour_miryoku/rules.mk]]
|
||||
#+BEGIN_SRC C :noweb yes :tangle ../../keyboards/crkbd/keymaps/manna-harbour_miryoku/rules.mk
|
||||
|
||||
# <<header>>
|
||||
|
||||
RGB_MATRIX_ENABLE = WS2812
|
||||
|
||||
#+END_SRC
|
||||
|
||||
|
||||
To build for this keyboard,
|
||||
|
||||
#+BEGIN_SRC sh :tangle no
|
||||
cd ../.. && make crkbd:manna-harbour_miryoku:avrdude
|
||||
cd ../.. && make crkbd:manna-harbour_miryoku:flash
|
||||
#+END_SRC
|
||||
|
||||
|
||||
|
||||
@@ -56,26 +56,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (!record->event.pressed) {
|
||||
uint8_t mods = get_mods();
|
||||
clear_mods();
|
||||
send_string_with_delay_P(PSTR("make " QMK_KEYBOARD ":" QMK_KEYMAP), 10);
|
||||
send_string_with_delay_P(PSTR("qmk compile -kb " QMK_KEYBOARD " -km " QMK_KEYMAP "\n"), 10); //New way
|
||||
if (mods & MOD_MASK_SHIFT) {
|
||||
//RESET board for flashing if SHIFT held or tapped with KC_MAKE
|
||||
#if defined(__arm__)
|
||||
send_string_with_delay_P(PSTR(":dfu-util"), 10);
|
||||
#elif defined(BOOTLOADER_DFU)
|
||||
send_string_with_delay_P(PSTR(":dfu"), 10);
|
||||
#elif defined(BOOTLOADER_HALFKAY)
|
||||
send_string_with_delay_P(PSTR(":teensy"), 10);
|
||||
#elif defined(BOOTLOADER_CATERINA)
|
||||
send_string_with_delay_P(PSTR(":avrdude"), 10);
|
||||
#endif // bootloader options
|
||||
send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), 10);
|
||||
send_string(SS_LGUI());
|
||||
send_string("qmk toolbox\n");
|
||||
reset_keyboard();
|
||||
}
|
||||
if (mods & MOD_MASK_CTRL) {
|
||||
send_string_with_delay_P(PSTR(" -j8 --output-sync"), 10);
|
||||
}
|
||||
send_string_with_delay_P(PSTR(SS_TAP(X_ENTER)), 10);
|
||||
set_mods(mods);
|
||||
set_mods(mods);
|
||||
}
|
||||
break;
|
||||
case KC_RDP: //Opens Windows RDP
|
||||
|
||||
@@ -5,6 +5,7 @@ function export_variables {
|
||||
export PATH=$PATH:$util_dir
|
||||
export PATH=$PATH:$util_dir/dfu-programmer
|
||||
export PATH=$PATH:$util_dir/dfu-util-0.9-win64
|
||||
export PATH=$PATH:$util_dir/bootloadHID.2012-12-08/commandline
|
||||
export PATH=$PATH:$util_dir/flip/bin
|
||||
export PATH=$PATH:$util_dir/avr8-gnu-toolchain/bin
|
||||
export PATH=$PATH:$util_dir/gcc-arm-none-eabi/bin
|
||||
|
||||
@@ -7,6 +7,7 @@ function export_variables {
|
||||
export DFU_PROGRAMMER=$download_dir/dfu-programmer/dfu-programmer.exe
|
||||
export DFU_UTIL=$download_dir/dfu-util-0.9-win64/dfu-util.exe
|
||||
export TEENSY_LOADER_CLI=$download_dir/teensy_loader_cli.exe
|
||||
export BOOTLOADHID_PROGRAMMER=$download_dir/bootloadHID.2012-12-08/commandline/bootloadHID.exe
|
||||
export BATCHISP=batchisp.exe
|
||||
}
|
||||
|
||||
|
||||
@@ -51,6 +51,7 @@ dir=$(pwd -W 2>/dev/null) || dir=$PWD # Use Windows path if on Windows
|
||||
|
||||
# Run container and build firmware
|
||||
docker run --rm -it $usb_args \
|
||||
--user $(id -u):$(id -g) \
|
||||
-w /qmk_firmware \
|
||||
-v "$dir":/qmk_firmware \
|
||||
-e ALT_GET_KEYBOARDS=true \
|
||||
|
||||
@@ -10,6 +10,16 @@ SOLUS_INFO="Your tools are now installed. To start using them, open new terminal
|
||||
|
||||
util_dir=$(dirname "$0")
|
||||
|
||||
# For those distros that do not package bootloadHID
|
||||
install_bootloadhid() {
|
||||
wget https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.tar.gz -O - | tar -xz -C /tmp
|
||||
cd /tmp/bootloadHID.2012-12-08/commandline/
|
||||
if make; then
|
||||
sudo cp bootloadHID /usr/local/bin
|
||||
fi
|
||||
cd -
|
||||
}
|
||||
|
||||
if grep ID /etc/os-release | grep -qE "fedora"; then
|
||||
sudo dnf install \
|
||||
arm-none-eabi-binutils-cs \
|
||||
@@ -28,6 +38,7 @@ if grep ID /etc/os-release | grep -qE "fedora"; then
|
||||
glibc-headers \
|
||||
kernel-devel \
|
||||
kernel-headers \
|
||||
libusb-devel \
|
||||
make \
|
||||
perl \
|
||||
python3 \
|
||||
@@ -54,7 +65,9 @@ elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then
|
||||
gcc-avr \
|
||||
git \
|
||||
libnewlib-arm-none-eabi \
|
||||
libusb-dev \
|
||||
python3 \
|
||||
python3-pip \
|
||||
unzip \
|
||||
wget \
|
||||
zip
|
||||
@@ -70,12 +83,14 @@ elif grep ID /etc/os-release | grep -q 'arch\|manjaro'; then
|
||||
avr-libc \
|
||||
avr-gcc \
|
||||
base-devel \
|
||||
bootloadhid \
|
||||
clang \
|
||||
dfu-programmer \
|
||||
dfu-util \
|
||||
diffutils \
|
||||
gcc \
|
||||
git \
|
||||
libusb-compat \
|
||||
python \
|
||||
python-pip \
|
||||
unzip \
|
||||
@@ -138,6 +153,7 @@ elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then
|
||||
dfu-tool \
|
||||
dfu-programmer \
|
||||
gcc \
|
||||
libusb-devel \
|
||||
python3 \
|
||||
unzip \
|
||||
wget \
|
||||
@@ -177,6 +193,7 @@ elif grep ID /etc/os-release | grep -q solus; then
|
||||
avrdude \
|
||||
dfu-util \
|
||||
dfu-programmer \
|
||||
libusb-devel \
|
||||
python3 \
|
||||
git \
|
||||
wget \
|
||||
@@ -214,4 +231,5 @@ else
|
||||
fi
|
||||
|
||||
# Global install tasks
|
||||
install_bootloadhid
|
||||
pip3 install --user -r ${util_dir}/../requirements.txt
|
||||
|
||||
@@ -24,6 +24,9 @@ fi
|
||||
brew tap osx-cross/avr
|
||||
brew tap osx-cross/arm
|
||||
brew update
|
||||
brew install avr-gcc@8 arm-gcc-bin dfu-programmer avrdude clang-format dfu-util python3
|
||||
brew install avr-gcc@8 arm-gcc-bin@8 dfu-programmer avrdude clang-format dfu-util python3
|
||||
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
|
||||
brew link --force avr-gcc@8
|
||||
brew link --force arm-gcc-bin@8
|
||||
|
||||
pip3 install -r "${util_dir}/../requirements.txt"
|
||||
|
||||
@@ -18,6 +18,10 @@ function install_utils {
|
||||
wget 'https://www.pjrc.com/teensy/teensy_loader_cli_windows.zip'
|
||||
unzip teensy_loader_cli_windows.zip
|
||||
|
||||
echo "Installing bootloadHID"
|
||||
wget 'https://www.obdev.at/downloads/vusb/bootloadHID.2012-12-08.zip'
|
||||
unzip bootloadHID.2012-12-08.zip
|
||||
|
||||
echo "Installing Atmel Flip"
|
||||
wget 'http://ww1.microchip.com/downloads/en/DeviceDoc/Flip%20Installer%20-%203.4.7.112.exe'
|
||||
mv Flip\ Installer\ \-\ 3.4.7.112.exe FlipInstaller.exe
|
||||
|
||||
Reference in New Issue
Block a user