Changed US_RBRC to KC_RBRC instead of KC_LBRC (#9664 )

Reduce peak LED brightness for AoS TKL (#9667 )
Fix }] key in matrix for GHS.RAR (#9671 )
2026-07-02 06:54:22 -04:00 · 2020-07-08 21:45:43 +01:00 · 2020-07-08 21:43:23 +01:00 · 2020-07-08 20:03:02 +01:00 · 2020-07-08 19:55:02 +01:00 · 2020-07-08 17:20:24 +01:00
72 changed files with 2493 additions and 144 deletions
@@ -3,8 +3,14 @@ LAYOUTS_REPOS := $(patsubst %/,%,$(sort $(dir $(wildcard $(LAYOUTS_PATH)/*/))))

 define SEARCH_LAYOUTS_REPO
    LAYOUT_KEYMAP_PATH := $$(LAYOUTS_REPO)/$$(LAYOUT)/$$(KEYMAP)
+    LAYOUT_KEYMAP_JSON := $$(LAYOUT_KEYMAP_PATH)/keymap.json
    LAYOUT_KEYMAP_C := $$(LAYOUT_KEYMAP_PATH)/keymap.c
-    ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
+    ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_JSON))","")
+        -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
+        KEYMAP_C := $(KEYBOARD_OUTPUT)/src/keymap.c
+        KEYMAP_JSON := $$(LAYOUT_KEYMAP_JSON)
+        KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
+    else ifneq ("$$(wildcard $$(LAYOUT_KEYMAP_C))","")
        -include $$(LAYOUT_KEYMAP_PATH)/rules.mk
        KEYMAP_C := $$(LAYOUT_KEYMAP_C)
        KEYMAP_PATH := $$(LAYOUT_KEYMAP_PATH)
@@ -24,4 +30,7 @@ ifneq ($(FORCE_LAYOUT),)
    endif
 endif

-$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))
+$(foreach LAYOUT,$(LAYOUTS),$(eval $(call SEARCH_LAYOUTS)))
+
+# Use rule from build_json.mk, but update prerequisite in case KEYMAP_JSON was updated
+$(KEYBOARD_OUTPUT)/src/keymap.c: $(KEYMAP_JSON)
@@ -250,7 +250,10 @@ There are a few different ways to set handedness for split keyboards (listed in
 * `#define SPLIT_HAND_PIN B7`
  * For using high/low pin to determine handedness, low = right hand, high = left hand. Replace `B7` with the pin you are using. This is optional, and if you leave `SPLIT_HAND_PIN` undefined, then you can still use the EE_HANDS method or MASTER_LEFT / MASTER_RIGHT defines like the stock Let's Split uses.

-* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` is not defined)
+* `#define SPLIT_HAND_MATRIX_GRID <out_pin>,<in_pin>`
+  * The handedness is determined by using the intersection of the keyswitches in the key matrix, which does not exist. Normally, when this intersection is shorted (level low), it is considered left. If you define `#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT`, it is determined to be right when the level is low.
+
+* `#define EE_HANDS` (only works if `SPLIT_HAND_PIN` and `SPLIT_HAND_MATRIX_GRID` are not defined)
  * Reads the handedness value stored in the EEPROM after `eeprom-lefthand.eep`/`eeprom-righthand.eep` has been flashed to their respective halves.

 * `#define MASTER_RIGHT`
@@ -53,7 +53,7 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uacc

 **Note:** With older (before 1.12) ModemManager, filtering only works when not in strict mode, the following commands can update that settings:
 ```console
-sudo sed -i 's/--filter-policy=strict/--filter-policy=default/' /lib/systemd/system/ModemManager.service
+printf '[Service]\nExecStart=\nExecStart=/usr/sbin/ModemManager --filter-policy=default' | sudo tee /etc/systemd/system/ModemManager.service.d/policy.conf
 sudo systemctl daemon-reload
 sudo systemctl restart ModemManager
 ```
@@ -7,9 +7,17 @@ DIP switches are supported by adding this to your `rules.mk`:
 and this to your `config.h`:

 ```c
+// Connects each switch in the dip switch to the GPIO pin of the MCU
 #define DIP_SWITCH_PINS { B14, A15, A10, B9 }
 ```

+or
+
+```c
+// Connect each switch in the DIP switch to an unused intersections in the key matrix.
+#define DIP_SWITCH_MATRIX_GRID { {0,6}, {1,6}, {2,6} } // List of row and col pairs
+```
+
 ## Callbacks

 The callback functions can be inserted into your `<keyboard>.c`:
@@ -87,4 +95,10 @@ void dip_switch_update_mask_user(uint32_t state) {

 ## Hardware

+### Connects each switch in the dip switch to the GPIO pin of the MCU
+
 One side of the DIP switch should be wired directly to the pin on the MCU, and the other side to ground.  It should not matter which side is connected to which, as it should be functionally the same. 
+
+### Connect each switch in the DIP switch to an unused intersections in the key matrix.
+
+As with the keyswitch, a diode and DIP switch connect the ROW line to the COL line.
@@ -18,7 +18,7 @@ That should be everything necessary.

 To start recording the macro, press either `DYN_REC_START1` or `DYN_REC_START2`. 

-To finish the recording, press the `DYN_REC_STOP` layer button. 
+To finish the recording, press the `DYN_REC_STOP` layer button. You can also press `DYN_REC_START1` or `DYN_REC_START2` again to stop the recording.

 To replay the macro, press either `DYN_MACRO_PLAY1` or `DYN_MACRO_PLAY2`.

@@ -90,6 +90,24 @@ You can configure the firmware to read a pin on the controller to determine hand

 This will read the specified pin. If it's high, then the controller assumes it is the left hand, and if it's low, it's assumed to be the right side. 

+#### Handedness by Matrix Pin
+
+You can configure the firmware to read key matrix pins on the controller to determine handedness.  To do this, add the following to your `config.h` file:
+
+```c
+#define SPLIT_HAND_MATRIX_GRID D0, F1
+```
+
+The first pin is the output pin and the second is the input pin.
+
+Some keyboards have unused intersections in the key matrix. This setting uses one of these unused intersections to determine the handness.
+
+Normally, when a diode is connected to an intersection, it is judged to be left. If you add the following definition, it will be judged to be right.
+
+```c
+#define SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT
+```
+
 #### Handedness by EEPROM

 This method sets the keyboard's handedness by setting a flag in the persistent storage (`EEPROM`).  This is checked when the controller first starts up, and determines what half the keyboard is, and how to orient the keyboard layout. 
@@ -41,7 +41,7 @@ A macro which has been recorded on the keyboard and which will be lost when the
 ## Eclipse
 An IDE that is popular with many C developers.

-* [Eclipse Setup Instructions](eclipse.md)
+* [Eclipse Setup Instructions](other_eclipse.md)

 ## Firmware
 The software that controls your MCU.
@@ -22,6 +22,7 @@ To use these, simply `#include` the corresponding [header file](https://github.c
 |Estonian                   |`keymap_estonian.h`             |
 |Finnish                    |`keymap_finnish.h`              |
 |French                     |`keymap_french.h`               |
+|French (AFNOR)             |`keymap_french_afnor.h`         |
 |French (BÉPO)              |`keymap_bepo.h`                 |
 |French (Belgium)           |`keymap_belgian.h`              |
 |French (Switzerland)       |`keymap_fr_ch.h`                |
@@ -32,6 +32,7 @@ uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) {
            return 130;
        default:
            return TAPPING_TERM;
+    }
 }
 ```

@@ -272,6 +272,8 @@ void IS31FL3741_update_led_control_registers(uint8_t addr, uint8_t index) {
        for (int i = 0; i < 171; ++i) {
            IS31FL3741_write_register(addr, i, g_scaling_registers[0][180 + i]);
        }
+
+        g_scaling_registers_update_required[index] = false;
    }
 }

@@ -2,77 +2,78 @@

 #include "quantum.h"

-#define LAYOUT_all( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
-) { \
-	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011,  K012,  K013,  K014 }, \
-	{ K100,  KC_NO, K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111,  K112,  K113,  K114 }, \
-	{ K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211,  K212,  K213,  K214 }, \
-	{ K300,  K301,  K302,  K303,  K304,  K305,  K306,  K307,  K308,  K309,  K310,  K311,  KC_NO, K313,  K314 }, \
-	{ K400,  K401,  KC_NO, K403,  KC_NO, KC_NO, K406,  KC_NO, KC_NO, KC_NO, K410,  K411,  KC_NO, K413,  K414 }  \
-}
+#define XXX KC_NO

+#define LAYOUT_all( \
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
+}

 /* ANSI variant. No extra keys for ISO */
 #define LAYOUT_60_ansi( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K313, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
-) LAYOUT_all( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
-	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, KC_NO,\
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
-)
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, XXX }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, XXX, k2E }, \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, XXX }, \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
+}

 /* ISO variant. Remove useless ANSI keys */
 #define LAYOUT_60_iso( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012,       K013, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113,       \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,             K313, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
-) LAYOUT_all( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K013,\
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K214, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
-	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, KC_NO,\
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
-)
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
+    k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, XXX }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \
+    { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, XXX }, \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
+}

 /* HHKB Variant */
 #define LAYOUT_60_ansi_split_bs_rshift( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
-) LAYOUT_all( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,\
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
-	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314,\
-	K400, K401,       K403,             K406,                   K410, K411,       K413, K414  \
-)
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
+    k40, k41,      k43,           k46,                k4A, k4B,      k4D, k4E  \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, XXX, k2E }, \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
+    { k40, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, k4A, k4B, XXX, k4D, k4E } \
+}

 /* HHKB Variant */
 #define LAYOUT_60_hhkb( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212,       K214, \
-	K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	            K401, K403,             K406,                   K411, K413                    \
-) LAYOUT_all( \
-	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
-	K100,       K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \
-	K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K214, \
-	K300, KC_NO,K302, K303, K304, K305, K306, K307, K308, K309, K310, K311,       K313, K314, \
-	KC_NO,K401,       K403,             K406,                   KC_NO,K411,       K413, KC_NO \
-)
+    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
+    k10,      k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+    k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C,      k2E, \
+    k30,      k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B,      k3D, k3E, \
+         k41,      k43,           k46,                     k4B,      k4D \
+) { \
+    { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
+    { k10, XXX, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+    { k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, XXX, k2E }, \
+    { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, XXX, k3D, k3E }, \
+    { XXX, k41, XXX, k43, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, XXX, k4D, XXX } \
+}
@@ -53,4 +53,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8
+    #define RGBLIGHT_LIMIT_VAL 50
 #endif
@@ -0,0 +1,15 @@
+# YDKB Chili
+
+[Chili PCB](https://i.imgur.com/fKi896a.jpg)
+
+The YDKB Chili is a Cherry G80-3000 replacement PCB utilizing the ATmega32U4 microcontroller.
+
+* Keyboard Maintainer: QMK community
+* Hardware Supported: YDKB Chili
+* Hardware Availability: [TaoBao](https://item.taobao.com/item.htm?id=565823984744)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make chili:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,42 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "chili.h"
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+    led_init_ports();
+    matrix_init_user();
+}
+
+void led_init_ports(void) {
+    setPinOutput(B1);
+    writePinHigh(B1);
+    setPinOutput(B2);
+    writePinHigh(B2);
+    setPinOutput(B3);
+    writePinHigh(B3);
+}
+
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if(res) {
+        writePin(B1, !led_state.num_lock);
+        writePin(B2, !led_state.caps_lock);
+        writePin(B3, !led_state.scroll_lock);
+    }
+    return res;
+}
@@ -0,0 +1,39 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_all( \
+    K00,    K01, K02, K03, K04,    K05, K06, K07, K08,     K09, K69, K68, K67,   K66, K65, K64,                       \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K79, K78, K77, K76, K75,   K74, K73, K72,   K63, K62, K61, K60, \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K89, K88, K87,   K86,   K85, K84, K83,   K82, K81, K80, K90, \
+    K30,      K31, K32, K33, K34, K35, K36, K37, K38, K39, K99, K98,      K97,                    K95, K92, K71, K70, \
+    K40, K41,   K42, K43, K44, K45, K46, K47, K48, K49, KA9, KA8,    KA6, KA7,        K96,        K94, K93, K91, KA0, \
+    K50,  K51,  K52,               K53, K54,            K55,  K56,  K57,  K58,   K59, KA5, KA4,   KA3, KA2, KA1       \
+) { \
+    { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \
+    { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \
+    { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \
+    { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39 }, \
+    { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49 }, \
+    { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59 }, \
+    { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69 }, \
+    { K70, K71, K72, K73, K74, K75, K76, K77, K78, K79 }, \
+    { K80, K81, K82, K83, K84, K85, K86, K87, K88, K89 }, \
+    { K90, K91, K92, K93, K94, K95, K96, K97, K98, K99 }, \
+    { KA0, KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8, KA9 }  \
+}
@@ -0,0 +1,179 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5945 // "YE"
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    YDKB
+#define PRODUCT         Chili
+#define DESCRIPTION     QMK keyboard firmware for Chili, a G80-3000 replacement PCB
+
+/* key matrix size */
+#define MATRIX_ROWS 11
+#define MATRIX_COLS 10
+
+// ROWS: Top to bottom, COLS: Left to right
+/* Row pin configuration
+*/
+#define MATRIX_ROW_PINS { F5, F4, F1, F0, E6, B0, D5, D3, D2, D1, D0 }
+/* Column pin configuration
+ */
+#define MATRIX_COL_PINS { D4, F6, F7, C7, C6, B6, B5, B4, D7, D6 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+/* Underlight configuration
+ */
+#define RGB_DI_PIN B3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 30     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 5
+#define RGBLIGHT_SAT_STEP 10
+#define RGBLIGHT_VAL_STEP 10
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1          H
+//#define MAGIC_KEY_HELP2          SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0_ALT1    ESC
+//#define MAGIC_KEY_LAYER0_ALT2    GRAVE
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     PAUSE
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
@@ -0,0 +1,12 @@
+{
+    "keyboard_name": "YDKB Chili", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "width": 22.5, 
+    "height": 6.5, 
+    "layouts": {
+        "LAYOUT_all": {
+            "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backsp", "x":13, "y":1.5}, {"x":14, "y":1.5}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Num Lock", "x":18.5, "y":1.5}, {"label":"/", "x":19.5, "y":1.5}, {"label":"*", "x":20.5, "y":1.5}, {"label":"-", "x":21.5, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"7", "x":18.5, "y":2.5}, {"label":"8", "x":19.5, "y":2.5}, {"label":"9", "x":20.5, "y":2.5}, {"label":"+", "x":21.5, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, {"label":"6", "x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"1", "x":18.5, "y":4.5}, {"label":"2", "x":19.5, "y":4.5}, {"label":"3", "x":20.5, "y":4.5}, {"label":"Enter", "x":21.5, "y":4.5, "h":2}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":3}, {"x":6.75, "y":5.5, "w":3}, {"label":"Alt", "x":9.75, "y":5.5, "w":1.5}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}, {"label":"0", "x":18.5, "y":5.5}, {"x":19.5, "y":5.5}, {"label":".", "x":20.5, "y":5.5}]
+        }
+    }
+}
@@ -0,0 +1,35 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+  BASE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [BASE] = LAYOUT_all(
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_NO,              KC_INS,  KC_HOME, KC_PGUP,     KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,    KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC, KC_RBRC,      KC_BSLS,            KC_DEL,  KC_END,  KC_PGDN,     KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_CAPS,      KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,              KC_ENT,                                            KC_P4,   KC_P5,   KC_P6,   KC_NO,
+    KC_LSFT, KC_NO,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,             KC_NO, KC_RSFT,                     KC_UP,                KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_NO, KC_SPC,                               KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_NO,   KC_PDOT
+  ),
+ 
+};
@@ -0,0 +1,61 @@
+/* Copyright 2017 Mathias Andersson <wraul@dbox.se>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+ 
+#include QMK_KEYBOARD_H
+
+//Layers
+
+enum {
+  BASE = 0,
+  FUNCTION,
+  ALTERNATE,
+  LAST,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [BASE] = LAYOUT_all(
+    KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,             KC_PSCR, KC_SLCK, KC_PAUS,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_NO,              KC_INS,  KC_HOME, KC_PGUP,     KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,    KC_Q,     KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,     KC_LBRC, KC_RBRC,      KC_BSLS,            KC_DEL,  KC_END,  KC_PGDN,     KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+    KC_CAPS,      KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,              KC_ENT,                                            KC_P4,   KC_P5,   KC_P6,   KC_NO,
+    KC_LSFT, KC_NO,  KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH,             KC_NO, KC_RSFT,                     KC_UP,                KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_NO, KC_SPC,                               KC_RALT, KC_RGUI, KC_APP,  KC_RCTL,            KC_LEFT, KC_DOWN, KC_RGHT,     KC_P0,   KC_NO,   KC_PDOT
+  ),
+  [FUNCTION] = LAYOUT_all(
+    _______,           _______,   _______,   _______,   _______,       _______,   _______,   _______,   _______,        _______,   _______,  _______,  _______,             _______, _______, _______,
+    _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______, _______,              _______,  _______, _______,     _______, _______, _______, _______,
+    _______,    _______,     _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,     _______, _______,      _______,            _______,  _______,  _______,     _______,   _______,   _______,   _______,
+    _______,      _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,              _______,                                            _______,   _______,   _______,   _______,
+    _______, _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______,             _______, _______,                     _______,                _______,   _______,   _______,   _______,
+    _______, _______, _______,                            _______, _______,                               _______, _______, _______,  _______,            _______, _______, _______,     _______,   _______,   _______
+  ),
+  [ALTERNATE] = LAYOUT_all(
+    _______,           _______,   _______,   _______,   _______,       _______,   _______,   _______,   _______,        _______,   _______,  _______,  _______,             _______, _______, _______,
+    _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______, _______,              _______,  _______, _______,     _______, _______, _______, _______,
+    _______,    _______,     _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,     _______, _______,      _______,            _______,  _______,  _______,     _______,   _______,   _______,   _______,
+    _______,      _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,              _______,                                            _______,   _______,   _______,   _______,
+    _______, _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______,             _______, _______,                     _______,                _______,   _______,   _______,   _______,
+    _______, _______, _______,                            _______, _______,                               _______, _______, _______,  _______,            _______, _______, _______,     _______,   _______,   _______
+  ),
+  [LAST] = LAYOUT_all(
+    _______,           _______,   _______,   _______,   _______,       _______,   _______,   _______,   _______,        _______,   _______,  _______,  _______,             _______, _______, _______,
+    _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______, _______,              _______,  _______, _______,     _______, _______, _______, _______,
+    _______,    _______,     _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,     _______, _______,      _______,            _______,  _______,  _______,     _______,   _______,   _______,   _______,
+    _______,      _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,              _______,                                            _______,   _______,   _______,   _______,
+    _______, _______,  _______,    _______,    _______,    _______,    _______,    _______,    _______,    _______, _______,  _______,             _______, _______,                     _______,                _______,   _______,   _______,   _______,
+    _______, _______, _______,                            _______, _______,                               _______, _______, _______,  _______,            _______, _______, _______,     _______,   _______,   _______
+  ),
+};
@@ -0,0 +1 @@
+VIA_ENABLE = yes
@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight
+MIDI_ENABLE = no            # MIDI controls
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
@@ -11,7 +11,7 @@
 #define PRODUCT_ID      0x00BE
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    astro
-#define PRODUCT         Dumplings
+#define PRODUCT         DP60
 #define DESCRIPTION     60% rgb keyboard with ble extension

 /* key matrix size */
@@ -9,6 +9,49 @@
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array
+    // Matrix layout to accomodate all layouts. Good for VIA mapping correctly, and it doesnt exist yet
+    //
+    //┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐  ┌──────┐
+    //│0A││0B││0C││0D││0E││0F││0G││4H││0H││0I││0J││0K││0L││0M││0N│  │  0N  │      split backspace support
+    //└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘  └──────┘
+    // 00  01  02  03  04  05  06  07  08  09  0a  0b  0c  0d  0e      0e
+    //┌────┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌────┐    ┌────┐
+    //│1A  ││1B││1C││1D││1E││1F││1G││1H││1I││1J││1K││1L││1M││1N  │    │    │      iso enter - see below
+    //└────┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└────┘    └────┘
+    //  10   11  12  13  14  15  16  17  18  19  1a  1b  1c   1e
+    //┌─────┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌───────┐  ┌──┐┌──┐
+    //│ 2A  ││2B││2C││2D││2E││2F││2G││2H││2I││2J││2K││2L││  2N   │  │2M││2N│      iso enter
+    //└─────┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└───────┘  └──┘└──┘
+    // 20     22  23  24  25  26  27  28  29  2a  2b  2c    2e       2d  2e
+    //┌───────┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌──┐┌─────────┐
+    //│3A │ 3B││3C││3D││3E││3F││3G││3H││3I││3J││3K││3L││  3M  │3N│                split shifts (left and right)
+    //└───────┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└──┘└─────────┘
+    // 30   31  32  33  34  35  36  37  38  39  3a  3b    3c   3d
+    //┌───┐┌───┐┌───┐┌───────────────────────┐┌───┐┌───┐┌───┐┌───┐
+    //│4A ││4B ││4C ││         4G            ││4K ││4L ││4M ││4N │                wkl/hhkb use 4L (k49), 4M (k4a) , 4N (k4b)
+    //└───┘└───┘└───┘└───────────────────────┘└───┘└───┘└───┘└───┘
+    // 40   42   43            47              48   49   4a   4b
+    //end of mapping
+//
+//added k0d
+//added k2d KC_NUMS for iso
+//added k31 split l-shift, k3d split r-shift
+
+#define LAYOUT_all( \
+  k00,  k01,  k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \
+k10,    k11,  k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c,      k1e, \
+k20,          k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
+k30,    k31,  k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+k40,          k42, k43,                k47, k48, k49, k4a, k4b       \
+) \
+{ \
+  {k00,   k01,  k02, k03,   k04,   k05,   k06,                          k08, k09, k0a, k0b, k0c, k0d, k0e}, \
+  {k10,   k11,  k12, k13,   k14,   k15,   k16, k17,                     k18, k19, k1a, k1b, k1c,      k1e}, \
+  {k20,         k22, k23,   k24,   k25,   k26, k27,                     k28, k29, k2a, k2b, k2c, k2d, k2e}, \
+  {k30,   k31,  k32, k33,   k34,   k35,   k36, k37,                     k38, k39, k3a, k3b, k3c, k3d}, \
+  {k40,         k42, k43, KC_NO, KC_NO, KC_NO, k47, k07, KC_NO, KC_NO,  k48, k49, k4a, k4b}  \
+}
+
 #define LAYOUT_60_ansi( \
    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \
@@ -28,7 +71,7 @@
    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
 	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, \
-	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c,\
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \
 	k40,      k42, k43,                k47, k48, k49, k4a, k4b       \
 ) \
 { \
@@ -1,31 +1,31 @@
 #include QMK_KEYBOARD_H

 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-    [0] = LAYOUT_60_ansi_split_bs_rshift(
-      KC_ESC,      KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_DEL, KC_BSPC,
-      KC_TAB,      KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,
-      KC_CAPS,    KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT,        KC_ENT,
-      KC_LSFT,     KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  KC_RSFT,   MO(1),
-      KC_LCTL,  KC_LGUI,  KC_LALT,                        KC_SPC,                  KC_RALT,KC_RGUI,  TG(1),   KC_RCTL),
-      
-    [1] = LAYOUT_60_ansi_split_bs_rshift(
-      _______, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,
-      RESET,   RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,
-      _______,        _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN, KC_UP,KC_RIGHT,KC_HOME,KC_END,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,_______,_______,                        _______,                        _______,_______,TG(0),_______),
+    [0] = LAYOUT_all(
+      KC_ESC,       KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_MINS,KC_EQL, KC_DEL, KC_BSPC,
+      KC_TAB,         KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,   KC_P,   KC_LBRC,KC_RBRC,KC_BSLS,
+      KC_CAPS,          KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,   KC_SCLN,KC_QUOT, KC_NUHS,  KC_ENT,
+      KC_LSFT, KC_NUBS,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM,KC_DOT, KC_SLSH,  KC_RSFT,   MO(1),
+      KC_LCTL,  KC_LGUI,  KC_LALT,                        KC_SPC,                  KC_RGUI,KC_RALT,  MO(1),   KC_RCTL),

-    [2] = LAYOUT_60_ansi_split_bs_rshift(
+    [1] = LAYOUT_all(
+      KC_GRV, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,  KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_DEL,
+      RESET,   _______,KC_UP,_______,_______,_______,_______,_______,KC_PAUS,KC_SLCK,KC_PSCR,KC_PGUP,_______,KC_INS,
+      _______,        KC_LEFT,KC_DOWN,KC_RIGHT,_______,_______,_______,_______, _______,_______,KC_HOME,KC_END,_______, _______,
+      _______,_______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGDN,_______,_______,
+      _______,_______,_______,                        _______,                        _______,MO(2),TG(0),_______),
+
+    [2] = LAYOUT_all(
+      _______, _______,_______,  _______,_______,  _______,_______,  _______,_______,  _______,_______, _______,_______,_______,_______,
+      _______,   _______,KC_VOLU,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+      KC_MUTE,        KC_MPRV,KC_VOLD,KC_MNXT,_______,_______,_______,_______, _______,_______,_______,_______,_______, _______,
+      _______, _______,       RGB_TOG,RGB_MOD,RGB_RMOD,RGB_VAI,RGB_VAD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,_______,_______,_______,
+      _______,_______,_______,                        KC_MPLY,                        _______,_______,_______,_______),
+
+    [3] = LAYOUT_all(
      _______, _______,_______,  _______,_______,  _______,_______,  _______,_______,  _______,_______, _______,_______,_______,_______,
      _______,   _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,_______,_______,                        _______,                        _______,_______,_______,_______),
-
-    [3] = LAYOUT_60_ansi_split_bs_rshift(
-      _______, _______,_______,  _______,_______,  _______,_______,  _______,_______,  _______,_______, _______,_______,_______,_______,
-      _______,   _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,
-      _______,        _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
-      _______,_______,_______,                        _______,                        _______,_______,_______,_______)    
-};
+      _______,        _______,_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______,
+      _______, _______,       _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,
+      _______,_______,_______,                        _______,                        _______,_______,_______,_______)
+};
@@ -1,2 +1,3 @@
 VIA_ENABLE = yes
 LTO_ENABLE = yes
+RGBLIGHT_ENABLE = yes #enables underglow, but will not disable per key leds
@@ -22,14 +22,14 @@ COMMAND_ENABLE = no         # Commands for debug and configuration
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
 SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
 # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no # USB Nkey Rollover
+NKRO_ENABLE = yes # USB Nkey Rollover
 BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality on B7 by default
 MIDI_ENABLE = no            # MIDI support
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
-#RGBLIGHT_ENABLE = yes       # Use RGB underglow light
+RGBLIGHT_ENABLE = no        # Use RGB underglow light
 RGB_MATRIX_ENABLE = yes     # Use RGB matrix

 LAYOUTS = 60_ansi 60_hhkb 60_iso 60_ansi_split_bs_rshift
@@ -23,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
        KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_PGUP,
        KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_PGDN,
        KC_LSFT, KC_NO,   KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_END,
-        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   KC_NO,   KC_LEFT, KC_DOWN, KC_RGHT
+        KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, KC_NO,   MO(1),   KC_LEFT, KC_DOWN, KC_RGHT
    ),
    [1] = LAYOUT_all(
        RGB_TOG,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          RESET,
@@ -32,7 +32,7 @@
 #define LAYOUT_ansi( \
    k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26,    k36,      k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
    k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75,     k76,       k77, \
    k80,      k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
    ka0, kb0, ka1,                 ka3,               ka5,   ka6,      kb6, ka7, kb7 \
@@ -42,8 +42,8 @@
    { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
    { k20, k21, k22, k23, k24, k25, k26, XXX }, \
    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
    { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
    { k70, k71, k72, k73, k74, k75, k76, k77 }, \
    { k80, k81, k82, k83, k84, k85, k86, k87 }, \
@@ -55,7 +55,7 @@
 #define LAYOUT_ansi_wkl( \
    k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26,    k36,      k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
    k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75,     k76,       k77, \
    k80,      k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
    ka0,   kb0,                    ka3,               ka5,   ka6,      kb6, ka7, kb7 \
@@ -65,8 +65,8 @@
    { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
    { k20, k21, k22, k23, k24, k25, k26, XXX }, \
    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
    { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
    { k70, k71, k72, k73, k74, k75, k76, k77 }, \
    { k80, k81, k82, k83, k84, k85, k86, k87 }, \
@@ -78,7 +78,7 @@
 #define LAYOUT_iso( \
    k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26,    k36,      k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
    k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76,           k77, \
    k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
    ka0, kb0, ka1,                 ka3,               ka5,   ka6,      kb6, ka7, kb7 \
@@ -88,8 +88,8 @@
    { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
    { k20, k21, k22, k23, k24, k25, k26, XXX }, \
    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
    { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
    { k70, k71, k72, k73, k74, k75, k76, k77 }, \
    { k80, k81, k82, k83, k84, k85, k86, k87 }, \
@@ -101,7 +101,7 @@
 #define LAYOUT_iso_wkl( \
    k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26,    k36,      k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
    k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k76,           k77, \
    k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
    ka0,   kb0,                    ka3,               ka5,   ka6,      kb6, ka7, kb7 \
@@ -111,8 +111,8 @@
    { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
    { k20, k21, k22, k23, k24, k25, k26, XXX }, \
    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
    { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
    { k70, k71, k72, k73, k74, k75, k76, k77 }, \
    { k80, k81, k82, k83, k84, k85, k86, k87 }, \
@@ -124,7 +124,7 @@
 #define LAYOUT_all( \
    k00,     k01, k11, k02, k12,   k03, k13, k04, k14,   k15, k06, k16,  k07,     k17, \
    k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27,    k37, \
-    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k56,   k47,     k57, \
+    k40,   k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46,   k47,     k57, \
    k60,    k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75,     k76,       k77, \
    k80, k90, k81, k91, k82, k92, k83, k93, k84, k94, k85, k95,     k86,    k87,  k97, \
    ka0, kb0, ka1,                 ka3,               ka5, kb5, ka6,   kb6, ka7, kb7 \
@@ -134,8 +134,8 @@
    { XXX, k11, k12, k13, k14, k15, k16, k17 }, \
    { k20, k21, k22, k23, k24, k25, k26, k27 }, \
    { k30, k31, k32, k33, k34, k35, k36, k37 }, \
-    { k40, k41, k42, k43, k44, k45, XXX, k47 }, \
-    { k50, k51, k52, k53, k54, k55, k56, k57 }, \
+    { k40, k41, k42, k43, k44, k45, k46, k47 }, \
+    { k50, k51, k52, k53, k54, k55, XXX, k57 }, \
    { k60, k61, k62, k63, k64, k65, XXX, XXX }, \
    { k70, k71, k72, k73, k74, k75, k76, k77 }, \
    { k80, k81, k82, k83, k84, k85, k86, k87 }, \
@@ -0,0 +1,38 @@
+/*
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xE9B6
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Gowla
+#define PRODUCT         Gowla Macro Board
+#define DESCRIPTION     3x3 PCB
+
+/* Matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 3
+
+/* Pin-out */
+#define MATRIX_ROW_PINS { D1, D0, D4 }
+#define MATRIX_COL_PINS { B5, B4, E6 }
+#define UNUSED_PINS
+
+/* ROW2COL */
+#define DIODE_DIRECTION ROW2COL
@@ -0,0 +1 @@
+#include "gowla.h"
@@ -0,0 +1,13 @@
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_ortho_3x3( \
+      k00, k01, k02, \
+      k10, k11, k12, \
+      k20, k21, k22  \
+) { \
+    { k00, k01, k02 }, \
+    { k10, k11, k12 }, \
+    { k20, k21, k22 } \
+}
@@ -0,0 +1,24 @@
+{
+    "keyboard_name": "Gowla Macro Pad",
+    "url": "https://github.com/SamGowland/Gowla-Macro-Board",
+    "maintainer": "Gowla",
+    "width": 3,
+    "height": 3,
+    "layouts": {
+        "LAYOUT_ortho_3x3": {
+            "layout": [
+                {"x": 0, "y": 0},
+                {"x": 1, "y": 0},
+                {"x": 2, "y": 0},
+
+                {"x": 0, "y": 1},
+                {"x": 1, "y": 1},
+                {"x": 2, "y": 1},
+
+                {"x": 0, "y": 2},
+                {"x": 1, "y": 2},
+                {"x": 2, "y": 2}
+            ]
+        }
+    }
+}
@@ -0,0 +1,14 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_ortho_3x3(
+        LT(1, KC_MPRV), KC_MNXT, KC_MPLY,
+        KC_VOLD,        KC_UP,   KC_VOLU,
+        KC_LEFT,        KC_DOWN, KC_RGHT
+    ),
+    [1] = LAYOUT_ortho_3x3(
+        KC_ESC,  KC_MPLY, RESET,
+        KC_P7,   KC_P1,   KC_F1,
+        KC_F2,   KC_F3,   KC_F4
+    )
+};
@@ -0,0 +1,15 @@
+# Gowla Macro Board
+
+![Gowla](https://github.com/SamGowland/Gowla-Macro-Board/blob/master/Images/comp.jpg)
+
+Simple Compact 3x3 Macro Board for use with QMK, designed and sold by Gowla.
+
+* Keyboard Maintainer: [Gowla](https://github.com/SamGowland/)
+* Hardware Supported: Pro Micro ATmega32U4, Cherry Mount Switches
+* Hardware Availability: [Repo](https://github.com/SamGowland/Gowla-Macro-Board)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make gowla:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,31 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = caterina
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
@@ -0,0 +1,51 @@
+/*
+Copyright 2020 boss566y
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x5048 //PH
+#define PRODUCT_ID      0x0001
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    PH
+#define PRODUCT         Redragon Vara 
+#define DESCRIPTION     HandWired Redragon Vara
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 11
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7, D0, F0, F1, F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { D1, D2, D3, C6, D5, C7, D4, D7, B4, B5, B6 }
+
+#define DIODE_DIRECTION COL2ROW
+
+
+// generated by KBFirmware JSON to QMK Parser
+// https://noroadsleft.github.io/kbf_qmk_converter/
@@ -0,0 +1,118 @@
+{
+    "keyboard_name": "Handwired Redragon Vara",
+    "url": "",
+    "maintainer": "qmk",
+    "width": 22.5,
+    "height": 6.5,
+    "layouts": {
+        "LAYOUT_fullsize_ansi": {
+            "layout": [
+                {"label":"K00 (B0,D1)", "x":0, "y":0},
+                {"label":"K02 (B0,D3)", "x":2, "y":0},
+                {"label":"K03 (B0,C6)", "x":3, "y":0},
+                {"label":"K04 (B0,D5)", "x":4, "y":0},
+                {"label":"K05 (B0,C7)", "x":5, "y":0},
+                {"label":"K07 (B0,D7)", "x":6.5, "y":0},
+                {"label":"K08 (B0,B4)", "x":7.5, "y":0},
+                {"label":"K09 (B0,B5)", "x":8.5, "y":0},
+                {"label":"K0A (B0,B6)", "x":9.5, "y":0},
+                {"label":"K6A (F0,B6)", "x":11, "y":0},
+                {"label":"K69 (F0,B5)", "x":12, "y":0},
+                {"label":"K68 (F0,B4)", "x":13, "y":0},
+                {"label":"K67 (F0,D7)", "x":14, "y":0},
+                {"label":"K66 (F0,D4)", "x":15.25, "y":0},
+                {"label":"K65 (F0,C7)", "x":16.25, "y":0},
+                {"label":"K64 (F0,D5)", "x":17.25, "y":0},
+                {"label":"K10 (B1,D1)", "x":0, "y":1.5},
+                {"label":"K11 (B1,D2)", "x":1, "y":1.5},
+                {"label":"K12 (B1,D3)", "x":2, "y":1.5},
+                {"label":"K13 (B1,C6)", "x":3, "y":1.5},
+                {"label":"K14 (B1,D5)", "x":4, "y":1.5},
+                {"label":"K15 (B1,C7)", "x":5, "y":1.5},
+                {"label":"K16 (B1,D4)", "x":6, "y":1.5},
+                {"label":"K17 (B1,D7)", "x":7, "y":1.5},
+                {"label":"K18 (B1,B4)", "x":8, "y":1.5},
+                {"label":"K19 (B1,B5)", "x":9, "y":1.5},
+                {"label":"K1A (B1,B6)", "x":10, "y":1.5},
+                {"label":"K7A (F1,B6)", "x":11, "y":1.5},
+                {"label":"K79 (F1,B5)", "x":12, "y":1.5},
+                {"label":"K78 (F1,B4)", "x":13, "y":1.5, "w":2},
+                {"label":"K76 (F1,D4)", "x":15.25, "y":1.5},
+                {"label":"K75 (F1,C7)", "x":16.25, "y":1.5},
+                {"label":"K74 (F1,D5)", "x":17.25, "y":1.5},
+                {"label":"K73 (F1,C6)", "x":18.5, "y":1.5},
+                {"label":"K72 (F1,D3)", "x":19.5, "y":1.5},
+                {"label":"K71 (F1,D2)", "x":20.5, "y":1.5},
+                {"label":"K70 (F1,D1)", "x":21.5, "y":1.5},
+                {"label":"K20 (B2,D1)", "x":0, "y":2.5, "w":1.5},
+                {"label":"K21 (B2,D2)", "x":1.5, "y":2.5},
+                {"label":"K22 (B2,D3)", "x":2.5, "y":2.5},
+                {"label":"K23 (B2,C6)", "x":3.5, "y":2.5},
+                {"label":"K24 (B2,D5)", "x":4.5, "y":2.5},
+                {"label":"K25 (B2,C7)", "x":5.5, "y":2.5},
+                {"label":"K26 (B2,D4)", "x":6.5, "y":2.5},
+                {"label":"K27 (B2,D7)", "x":7.5, "y":2.5},
+                {"label":"K28 (B2,B4)", "x":8.5, "y":2.5},
+                {"label":"K29 (B2,B5)", "x":9.5, "y":2.5},
+                {"label":"K2A (B2,B6)", "x":10.5, "y":2.5},
+                {"label":"K8A (F4,B6)", "x":11.5, "y":2.5},
+                {"label":"K89 (F4,B5)", "x":12.5, "y":2.5},
+                {"label":"K87 (F4,D7)", "x":13.5, "y":2.5, "w":1.5},
+                {"label":"K86 (F4,D4)", "x":15.25, "y":2.5},
+                {"label":"K85 (F4,C7)", "x":16.25, "y":2.5},
+                {"label":"K84 (F4,D5)", "x":17.25, "y":2.5},
+                {"label":"K83 (F4,C6)", "x":18.5, "y":2.5},
+                {"label":"K82 (F4,D3)", "x":19.5, "y":2.5},
+                {"label":"K81 (F4,D2)", "x":20.5, "y":2.5},
+                {"label":"K90 (F5,D1)", "x":21.5, "y":2.5, "h":2},
+                {"label":"K30 (B3,D1)", "x":0, "y":3.5, "w":1.75},
+                {"label":"K31 (B3,D2)", "x":1.75, "y":3.5},
+                {"label":"K32 (B3,D3)", "x":2.75, "y":3.5},
+                {"label":"K33 (B3,C6)", "x":3.75, "y":3.5},
+                {"label":"K34 (B3,D5)", "x":4.75, "y":3.5},
+                {"label":"K35 (B3,C7)", "x":5.75, "y":3.5},
+                {"label":"K36 (B3,D4)", "x":6.75, "y":3.5},
+                {"label":"K37 (B3,D7)", "x":7.75, "y":3.5},
+                {"label":"K38 (B3,B4)", "x":8.75, "y":3.5},
+                {"label":"K39 (B3,B5)", "x":9.75, "y":3.5},
+                {"label":"K3A (B3,B6)", "x":10.75, "y":3.5},
+                {"label":"K9A (F5,B6)", "x":11.75, "y":3.5},
+                {"label":"K98 (F5,B4)", "x":12.75, "y":3.5, "w":2.25},
+                {"label":"K93 (F5,C6)", "x":18.5, "y":3.5},
+                {"label":"K92 (F5,D3)", "x":19.5, "y":3.5},
+                {"label":"K91 (F5,D2)", "x":20.5, "y":3.5},
+                {"label":"K40 (B7,D1)", "x":0, "y":4.5, "w":2.25},
+                {"label":"K42 (B7,D3)", "x":2.25, "y":4.5},
+                {"label":"K43 (B7,C6)", "x":3.25, "y":4.5},
+                {"label":"K44 (B7,D5)", "x":4.25, "y":4.5},
+                {"label":"K45 (B7,C7)", "x":5.25, "y":4.5},
+                {"label":"K46 (B7,D4)", "x":6.25, "y":4.5},
+                {"label":"K47 (B7,D7)", "x":7.25, "y":4.5},
+                {"label":"K48 (B7,B4)", "x":8.25, "y":4.5},
+                {"label":"K49 (B7,B5)", "x":9.25, "y":4.5},
+                {"label":"K4A (B7,B6)", "x":10.25, "y":4.5},
+                {"label":"KAA (F6,B6)", "x":11.25, "y":4.5},
+                {"label":"KA8 (F6,B4)", "x":12.25, "y":4.5, "w":2.75},
+                {"label":"KA5 (F6,C7)", "x":16.25, "y":4.5},
+                {"label":"KA3 (F6,C6)", "x":18.5, "y":4.5},
+                {"label":"KA2 (F6,D3)", "x":19.5, "y":4.5},
+                {"label":"KA1 (F6,D2)", "x":20.5, "y":4.5},
+                {"label":"KB0 (F7,D1)", "x":21.5, "y":4.5, "h":2},
+                {"label":"K50 (D0,D1)", "x":0, "y":5.5, "w":1.25},
+                {"label":"K51 (D0,D2)", "x":1.25, "y":5.5, "w":1.25},
+                {"label":"K53 (D0,C6)", "x":2.5, "y":5.5, "w":1.25},
+                {"label":"K56 (D0,D4)", "x":3.75, "y":5.5, "w":6.25},
+                {"label":"K5A (D0,B6)", "x":10, "y":5.5, "w":1.25},
+                {"label":"KBA (F7,B6)", "x":11.25, "y":5.5, "w":1.25},
+                {"label":"KB9 (F7,B5)", "x":12.5, "y":5.5, "w":1.25},
+                {"label":"KB7 (F7,D7)", "x":13.75, "y":5.5, "w":1.25},
+                {"label":"KB6 (F7,D4)", "x":15.25, "y":5.5},
+                {"label":"KB5 (F7,C7)", "x":16.25, "y":5.5},
+                {"label":"KB4 (F7,D5)", "x":17.25, "y":5.5},
+                {"label":"KB3 (F7,C6)", "x":18.5, "y":5.5, "w":2},
+                {"label":"KB1 (F7,D2)", "x":20.5, "y":5.5}
+            ]
+        }
+    }
+    ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/"
+}
@@ -0,0 +1,45 @@
+/* Copyright 2020 boss566y
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_fullsize_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,            KC_INS,  KC_HOME, KC_PGUP,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_DEL,  KC_END,  KC_PGDN,   KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        XXXXXXX,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                                             KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP,              KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              MO(1),     MO(2),     RGUI_T(KC_APP),   KC_LCTL,      KC_LEFT, KC_DOWN, KC_RGHT,   KC_P0,            KC_PDOT
+    ),
+    [1] = LAYOUT_fullsize_ansi(
+        RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,             _______, C(KC_HOME),  _______,   _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,   _______, _______, _______, _______,
+        KC_CAPS,       KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______,                                            _______, _______, _______,
+        _______,            _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______,                            _______,            _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______, _______, _______,   _______,          _______
+    ),
+    [2] = LAYOUT_fullsize_ansi(
+        RESET,            _______, _______, _______, _______,     _______, KC_VOLD, KC_VOLU, KC_MUTE,      KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______,   _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,   _______, _______, _______, _______,
+        _______,       _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, _______,                                            _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                            _______,            _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______, _______, _______,   _______,          _______
+    ),
+
+
+};
@@ -0,0 +1,11 @@
+# Default Layout
+
+Keymap is basic 104 qwerty layout with:
+
+* Caps Lock moved to Layer 1 leaving blank key on Base Layer
+* Menu Key changed to mod tap for Menu and Windows Keys
+* RAlt changed to M(1). Media playback on A to F, volume keys on X to V, and Delete on Backspace
+* FN is M(2). Arrow keys on HJKL, media keys on F6 to F12, and RCtrl+Home on Home. 
+* Both M(1) and M(2) have Reset on Escape
+
+ 
@@ -0,0 +1,21 @@
+/*
+Copyright 2020 boss566y
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3
+
@@ -0,0 +1,45 @@
+/* Copyright 2020 boss566y
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_fullsize_ansi(
+        KC_ESC,           KC_F1,   KC_F2,   KC_F3,   KC_F4,       KC_F5,   KC_F6,   KC_F7,   KC_F8,        KC_F9,   KC_F10,  KC_F11,  KC_F12,    KC_PSCR, KC_SLCK, KC_PAUS,
+        KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC,            KC_INS,  KC_HOME, KC_PGUP,   KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_TAB,      KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,        KC_DEL,  KC_END,  KC_PGDN,   KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        XXXXXXX,       KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                                             KC_P4,   KC_P5,   KC_P6,
+        KC_LSFT,            KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,                            KC_UP,              KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_LCTL,   KC_LGUI,   KC_LALT,                       KC_SPC,                              MO(1),     MO(2),     KC_RGUI,   KC_LCTL,      KC_LEFT, KC_DOWN, KC_RGHT,   KC_P0,            KC_PDOT
+    ),
+    [1] = LAYOUT_fullsize_ansi(
+        RESET,            _______, _______, _______, _______,     _______, _______, _______, _______,      _______, _______, _______, _______,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL,             _______, _______,  _______,   _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,   _______, _______, _______, _______,
+        KC_CAPS,       KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______,                                            _______, _______, _______,
+        _______,            _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______,                            _______,            _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______, _______, _______,   _______,          _______
+    ),
+    [2] = LAYOUT_fullsize_ansi(
+        RESET,            _______, _______, _______, _______,     _______, KC_VOLD, KC_VOLU, KC_MUTE,      KC_MPRV, KC_MSTP, KC_MPLY, KC_MNXT,   _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,            _______, _______, _______,   _______, _______, _______, _______,
+        _______,     _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,        _______, _______, _______,   _______, _______, _______, _______,
+        _______,       _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT, _______, _______, _______,                                            _______, _______, _______,
+        _______,            _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                            _______,            _______, _______, _______, _______,
+        _______,   _______,   _______,                      _______,                              _______,   _______,   _______,   _______,      _______, _______, _______,   _______,          _______
+    ),
+
+};
@@ -0,0 +1,12 @@
+# Default Layout
+
+Keymap is basic 104 qwerty layout with:
+
+* Caps Lock moved to Layer 1 leaving blank key on Base Layer
+* Menu Key changed to mod tap for Menu and Windows Keys
+* RAlt changed to M(1). Media playback on A to F, volume keys on X to V, and Delete on Backspace
+* FN is M(2). Arrow keys on HJKL, media keys on F6 to F12, and RCtrl+Home on Home. 
+* Both M(1) and M(2) have Reset on Escape
+* VIA Enabled [VIA JSON File](https://github.com/boss566y/keyboards/blob/boss566y/src/boss566y/handwired/redragon_vara.json)
+
+ 
@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
@@ -0,0 +1,14 @@
+# Handwired Redragon Vara
+
+![Redragon](https://imgur.com/6L35ata.jpg)
+
+A handwired Redragon Vara. Built using a teensy 2.0 and has  a 12x11 matrix 
+
+* Keyboard Maintainer: [boss566y](https://github.com/boss566y)
+* Hardware: Redragon Vara and Teensy 2.0
+
+Make example for this keyboard (after setting up your build environment):
+
+    make handwired/boss566y/redragon_vara:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
@@ -0,0 +1,16 @@
+/* Copyright 2020 boss566y
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "redragon_vara.h"
@@ -0,0 +1,43 @@
+/* Copyright 2020 boss566y
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT_fullsize_ansi( \
+    K00,      K02, K03, K04, K05,   K07, K08, K09, K0A,    K6A, K69, K68, K67,  K66, K65, K64,                      \
+    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K7A, K79, K78,       K76, K75, K74,  K73, K72, K71, K70, \
+    K20,   K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K8A, K89, K87,     K86, K85, K84,  K83, K82, K81, K90, \
+    K30,    K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K9A, K98,                         K93, K92, K91,      \
+    K40,       K42, K43, K44, K45, K46, K47, K48, K49, K4A, KAA, KA8,                KA5,       KA3, KA2, KA1, KB0, \
+    K50,  K51,  K53,              K56,                K5A,  KBA,  KB9,  KB7,    KB6, KB5, KB4,  KB3,      KB1       \
+) { \
+    { K00,   KC_NO, K02,   K03,   K04,   K05,   KC_NO, K07,   K08,   K09,   K0A   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A   }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A   }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A   }, \
+    { K40,   KC_NO, K42,   K43,   K44,   K45,   K46,   K47,   K48,   K49,   K4A   }, \
+    { K50,   K51,   KC_NO, K53,   KC_NO, KC_NO, K56,   KC_NO, KC_NO, KC_NO, K5A   }, \
+    { KC_NO, KC_NO, KC_NO, KC_NO, K64,   K65,   K66,   K67,   K68,   K69,   K6A   }, \
+    { K70,   K71,   K72,   K73,   K74,   K75,   K76,   KC_NO, K78,   K79,   K7A   }, \
+    { KC_NO, K81,   K82,   K83,   K84,   K85,   K86,   K87,   KC_NO, K89,   K8A   }, \
+    { K90,   K91,   K92,   K93,   KC_NO, KC_NO, KC_NO, KC_NO, K98,   KC_NO, K9A   }, \
+    { KC_NO, KA1,   KA2,   KA3,   KC_NO, KA5,   KC_NO, KC_NO, KA8,   KC_NO, KAA   }, \
+    { KB0,   KB1,   KC_NO, KB3,   KB4,   KB5,   KB6,   KB7,   KC_NO, KB9,   KBA   }, \
+}
+
+// generated by KBFirmware JSON to QMK Parser
+// https://noroadsleft.github.io/kbf_qmk_converter/
@@ -0,0 +1,34 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes        # Mouse keys
+EXTRAKEY_ENABLE = yes        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no        # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no             # USB Nkey Rollover
+BACKLIGHT_ENABLE = no        # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no         # Enable keyboard RGB underglow
+MIDI_ENABLE = no             # MIDI support
+UNICODE_ENABLE = no          # Unicode
+BLUETOOTH_ENABLE = no        # Enable Bluetooth
+AUDIO_ENABLE = no            # Audio output
+FAUXCLICKY_ENABLE = no       # Use buzzer to emulate clicky switches
+
+LAYOUTS = fullsize_ansi
@@ -0,0 +1,28 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT(
+  KC_LGUI, KC_GRV,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,      KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC,         RGUI_T(KC_RBRC),
+           KC_LCTL, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,      KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, RCTL_T(KC_QUOT),
+           KC_LALT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,      KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, RALT_T(KC_BSLS),
+                LT(2, KC_TAB), LSFT_T(KC_SPC), LT(1, KC_ENT),      LT(1, KC_ESC), RSFT_T(KC_BSPC), LT(2, KC_DEL)
+),
+[1] = LAYOUT(
+  _______, KC_UNDS,         KC_F1,   KC_F2, KC_F3,   KC_F4,   KC_F5,        KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,          RGUI_T(KC_F12),
+           LCTL_T(KC_EQL),  KC_EXLM, KC_AT, KC_HASH, KC_DLR,  KC_PERC,      KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, RCTL_T(KC_MINS),
+           LALT_T(KC_PPLS), KC_1,    KC_2,  KC_3,    KC_4,    KC_5,         KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    _______,
+                                      LT(3, KC_TAB), _______, _______,      _______, _______, LT(3, KC_DEL)
+),
+[2] = LAYOUT(
+  _______, KC_NLCK,         KC_PSLS, KC_P7,   KC_P8,   KC_P9,   KC_PMNS,      KC_VOLU, KC_HOME, KC_PSCR, KC_PGUP, KC_SLCK, KC_CAPS,        _______,
+           LCTL_T(KC_EQL),  KC_PAST, KC_P4,   KC_P5,   KC_P6,   KC_PPLS,      KC_MUTE, KC_LEFT, KC_UP,   KC_RGHT, KC_INS,  RCTL_T(KC_APP),
+           _______,         KC_P0,   KC_P1,   KC_P2,   KC_P3,   KC_PCMM,      KC_VOLD, KC_END,  KC_DOWN, KC_PGDN, KC_PAUS, _______,
+                                        _______, _______, LT(3, KC_ENT),      LT(3, KC_ESC), _______, _______
+),
+[3] = LAYOUT_symmetric(
+  RESET,   DEBUG,   XXXXXXX, BL_INC,  RGB_VAI, RGB_HUD, RGB_HUI,
+           XXXXXXX, XXXXXXX, BL_DEC,  RGB_VAD, RGB_SAD, RGB_SAI,
+           XXXXXXX, BL_BRTG, BL_TOGG, RGB_TOG, RGB_RMOD,RGB_MOD,
+                                      _______, SH_TG,   _______
+)
+};
@@ -0,0 +1,3 @@
+SWAP_HANDS_ENABLE = yes
+EXTRAKEY_ENABLE = yes    # Audio control and System control
+VIA_ENABLE = yes
@@ -41,6 +41,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5

+#define QMK_ESC_OUTPUT D3
+#define QMK_ESC_INPUT B1
+
 #define PHYSICAL_LEDS_ENABLE

 #ifdef BACKLIGHT_ENABLE
@@ -47,6 +47,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE 5

+#define QMK_ESC_OUTPUT D3
+#define QMK_ESC_INPUT B1
+
 #define PHYSICAL_LEDS_ENABLE
 #define IOS_DEVICE_ENABLE

@@ -1 +1,2 @@
 DEFAULT_FOLDER = jian/rev2
+LTO_ENABLE = yes
@@ -17,8 +17,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"

 /* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define VENDOR_ID       0x4B48 //KH for Keyhive
+#define PRODUCT_ID      0x4D50 // MP
 #define DEVICE_VER      0x0001
 #define MANUFACTURER    KeyHive
 #define PRODUCT         maypad
@@ -0,0 +1,26 @@
+/* Copyright 2019 codybender
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    LAYOUT_ortho_5x4(
+        KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+        KC_P7,   KC_P8,   KC_P9,   KC_PPLS,
+        KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+        KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+        KC_P0,   KC_P0,   KC_PDOT, KC_PENT
+    )
+};
@@ -0,0 +1,6 @@
+# VIA Support for Maypad
+
+This adds [VIA](https://caniusevia.com/) support for the Keyhive Maypad. 
+
+Please note that this is a keymap for the Ortho_5x4 layout.
+
@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
@@ -0,0 +1,36 @@
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+  [0] = LAYOUT_all(
+    KC_ESC,   KC_1,     KC_2,     KC_3,     KC_4,     KC_5,     KC_6,     KC_7,     KC_8,     KC_9,     KC_0,     KC_MINS,  KC_EQL,   KC_DEL,   KC_BSPC,  KC_HOME,
+    KC_TAB,   KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,     KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,     KC_LBRC,  KC_RBRC,            KC_BSLS,  KC_END,
+    KC_CAPS,  KC_A,     KC_S,     KC_D,     KC_F,     KC_G,     KC_H,     KC_J,     KC_K,     KC_L,     KC_SCLN,  KC_QUOT,                      KC_ENT,   KC_PGUP,
+    KC_LSFT,  KC_Z,     KC_X,     KC_C,     KC_V,     KC_B,     KC_N,     KC_M,     KC_COMM,  KC_DOT,   KC_SLSH,  KC_RSFT,                      KC_UP,    KC_PGDN,
+    KC_LCTL,  KC_LGUI,  KC_LALT,                      KC_SPC,                                 MO(1),    KC_RCTL,  KC_LEFT,                      KC_DOWN,  KC_RGHT
+  ),
+
+  [1] = LAYOUT_all(
+    KC_GRV,   KC_F1,    KC_F2,    KC_F3,    KC_F4,    KC_F5,    KC_F6,    KC_F7,    KC_F8,    KC_F9,    KC_F10,   KC_F11,   KC_F12,   _______,  KC_DEL,   _______,
+    RESET,    RGB_TOG,  RGB_MOD,  RGB_HUI,  RGB_HUD,  RGB_SAI,  RGB_SAD,  RGB_VAI,  RGB_VAD,  KC_P7,    KC_P8,    KC_P9,    _______,            _______,  _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  KC_P4,    KC_P5,    KC_P6,                        KC_NLCK,  _______,
+    _______,  _______,  _______,  _______,  BL_DEC,   BL_TOGG,  BL_INC,   BL_STEP,  _______,  KC_P1,    KC_P2,    KC_P3,                        KC_VOLU,  _______,
+    _______,  _______,  _______,                      _______,                                _______,  KC_P0,    KC_MPRV,                      KC_VOLD,  KC_MNXT
+  ), 
+  
+   [2] = LAYOUT_all(
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,                      _______,  _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,                      _______,  _______,
+    _______,  _______,  _______,                      _______,                                _______,  _______,  _______,                      _______,  _______
+  ), 
+  
+  [3] = LAYOUT_all(
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,            _______,  _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,                      _______,  _______,
+    _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,  _______,                      _______,  _______,
+    _______,  _______,  _______,                      _______,                                _______,  _______,  _______,                      _______,  _______
+  ) 
+};
@@ -0,0 +1,2 @@
+VIA_ENABLE = yes
+LTO_ENABLE = yes
@@ -36,16 +36,14 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
  return process_record_user(keycode, record);
 }

-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);

-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(E2);
-  } else {
-    writePinHigh(E2);
-  }
+    if (res) {
+        writePin(E2, !led_state.caps_lock);
+    }

-  led_set_user(usb_led);
+    return res;
 }

 void led_init_ports(void) {
@@ -6,7 +6,6 @@
    "height": 5,
    "layouts": {
        "LAYOUT_all": {
-            "key_count": 69,
            "layout": [
                {"label":"Esc", "x":0, "y":0},
                {"label":"1", "x":1, "y":0},
@@ -80,7 +79,6 @@
            ]
        },
        "LAYOUT_60_ansi": {
-            "key_count": 61,
            "layout": [
                {"x":0, "y":0},
                {"x":1, "y":0},
@@ -145,8 +143,354 @@
                {"x":13.75, "y":4, "w":1.25}
            ]
        }, 
+        "LAYOUT_60_ansi_split_bs": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2, "w":2.25},
+
+                {"x":0, "y":3, "w":2.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":2.75},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.25},
+                {"x":11.25, "y":4, "w":1.25},
+                {"x":12.5, "y":4, "w":1.25},
+                {"x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_ansi_split_bs_rshift": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2, "w":2.25},
+
+                {"x":0, "y":3, "w":2.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.25},
+                {"x":11.25, "y":4, "w":1.25},
+                {"x":12.5, "y":4, "w":1.25},
+                {"x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_ansi_split_rshift": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0, "w":2},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2, "w":2.25},
+
+                {"x":0, "y":3, "w":2.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.25},
+                {"x":11.25, "y":4, "w":1.25},
+                {"x":12.5, "y":4, "w":1.25},
+                {"x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_ansi_tsangan": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0, "w":2},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2, "w":2.25},
+
+                {"x":0, "y":3, "w":2.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":2.75},
+
+                {"x":0, "y":4, "w":1.5},
+                {"x":1.5, "y":4},
+                {"x":2.5, "y":4, "w":1.5},
+                {"x":4, "y":4, "w":7},
+                {"x":11, "y":4, "w":1.5},
+                {"x":12.5, "y":4},
+                {"x":13.5, "y":4, "w":1.5}
+            ]
+        },
+        "LAYOUT_60_hhkb": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+                {"x":13.5, "y":1, "w":1.5},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2, "w":2.25},
+
+                {"x":0, "y":3, "w":2.25},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+
+                {"x":1.5, "y":4},
+                {"x":2.5, "y":4, "w":1.5},
+                {"x":4, "y":4, "w":7},
+                {"x":11, "y":4, "w":1.5},
+                {"x":12.5, "y":4}
+            ]
+        },
        "LAYOUT_60_iso": {
-            "key_count": 62,
            "layout": [
                {"x":0, "y":0},
                {"x":1, "y":0},
@@ -215,6 +559,289 @@
                {"x":12.5, "y":4, "w":1.25},
                {"x":13.75, "y":4, "w":1.25}
            ]
+        },
+        "LAYOUT_60_iso_split_bs": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2},
+                {"x":13.75, "y":1, "w":1.25, "h":2},
+
+                {"x":0, "y":3, "w":1.25},
+                {"x":1.25, "y":3},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":2.75},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.25},
+                {"x":11.25, "y":4, "w":1.25},
+                {"x":12.5, "y":4, "w":1.25},
+                {"x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_iso_split_bs_rshift": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0},
+                {"x":14, "y":0},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2},
+                {"x":13.75, "y":1, "w":1.25, "h":2},
+
+                {"x":0, "y":3, "w":1.25},
+                {"x":1.25, "y":3},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.25},
+                {"x":11.25, "y":4, "w":1.25},
+                {"x":12.5, "y":4, "w":1.25},
+                {"x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_iso_split_rshift": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0, "w":2},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2},
+                {"x":13.75, "y":1, "w":1.25, "h":2},
+
+                {"x":0, "y":3, "w":1.25},
+                {"x":1.25, "y":3},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":1.75},
+                {"x":14, "y":3},
+
+                {"x":0, "y":4, "w":1.25},
+                {"x":1.25, "y":4, "w":1.25},
+                {"x":2.5, "y":4, "w":1.25},
+                {"x":3.75, "y":4, "w":6.25},
+                {"x":10, "y":4, "w":1.25},
+                {"x":11.25, "y":4, "w":1.25},
+                {"x":12.5, "y":4, "w":1.25},
+                {"x":13.75, "y":4, "w":1.25}
+            ]
+        },
+        "LAYOUT_60_iso_tsangan": {
+            "layout": [
+                {"x":0, "y":0},
+                {"x":1, "y":0},
+                {"x":2, "y":0},
+                {"x":3, "y":0},
+                {"x":4, "y":0},
+                {"x":5, "y":0},
+                {"x":6, "y":0},
+                {"x":7, "y":0},
+                {"x":8, "y":0},
+                {"x":9, "y":0},
+                {"x":10, "y":0},
+                {"x":11, "y":0},
+                {"x":12, "y":0},
+                {"x":13, "y":0, "w":2},
+
+                {"x":0, "y":1, "w":1.5},
+                {"x":1.5, "y":1},
+                {"x":2.5, "y":1},
+                {"x":3.5, "y":1},
+                {"x":4.5, "y":1},
+                {"x":5.5, "y":1},
+                {"x":6.5, "y":1},
+                {"x":7.5, "y":1},
+                {"x":8.5, "y":1},
+                {"x":9.5, "y":1},
+                {"x":10.5, "y":1},
+                {"x":11.5, "y":1},
+                {"x":12.5, "y":1},
+
+                {"x":0, "y":2, "w":1.75},
+                {"x":1.75, "y":2},
+                {"x":2.75, "y":2},
+                {"x":3.75, "y":2},
+                {"x":4.75, "y":2},
+                {"x":5.75, "y":2},
+                {"x":6.75, "y":2},
+                {"x":7.75, "y":2},
+                {"x":8.75, "y":2},
+                {"x":9.75, "y":2},
+                {"x":10.75, "y":2},
+                {"x":11.75, "y":2},
+                {"x":12.75, "y":2},
+                {"x":13.75, "y":1, "w":1.25, "h":2},
+
+                {"x":0, "y":3, "w":1.25},
+                {"x":1.25, "y":3},
+                {"x":2.25, "y":3},
+                {"x":3.25, "y":3},
+                {"x":4.25, "y":3},
+                {"x":5.25, "y":3},
+                {"x":6.25, "y":3},
+                {"x":7.25, "y":3},
+                {"x":8.25, "y":3},
+                {"x":9.25, "y":3},
+                {"x":10.25, "y":3},
+                {"x":11.25, "y":3},
+                {"x":12.25, "y":3, "w":2.75},
+
+                {"x":0, "y":4, "w":1.5},
+                {"x":1.5, "y":4},
+                {"x":2.5, "y":4, "w":1.5},
+                {"x":4, "y":4, "w":7},
+                {"x":11, "y":4, "w":1.5},
+                {"x":12.5, "y":4},
+                {"x":13.5, "y":4, "w":1.5}
+            ]
        }
    }
 }
@@ -31,6 +31,6 @@ AUDIO_ENABLE = no           # Audio output on port C6
 FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs

-LAYOUTS = 60_ansi 60_iso
+LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_ansi_tsangan 60_hhkb 60_iso 60_iso_split_bs_rshift 60_iso_tsangan

 DEFAULT_FOLDER = yd60mq/12led
@@ -30,19 +30,144 @@
    { K40, K41,   K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C,   K4D,   KC_NO }  \
 }

-#define LAYOUT_60_iso( \
+#define LAYOUT_60_ansi_split_bs( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,    K1D, \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,        K2D, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K40, K41, K42,                  K47,                   K49, K4A, K4C, K4D  \
+) { \
+    { K00, K01,   K02, K03,   K04,   K05,   K06,   K07, K08,   K09, K0A, K0B,   K0C,   K0D, K0E   }, \
+    { K10, K11,   K12, K13,   K14,   K15,   K16,   K17, K18,   K19, K1A, K1B,   K1C,   K1D, KC_NO }, \
+    { K20, K21,   K22, K23,   K24,   K25,   K26,   K27, K28,   K29, K2A, K2B,   KC_NO, K2D, KC_NO }, \
+    { K30, KC_NO, K32, K33,   K34,   K35,   K36,   K37, K38,   K39, K3A, K3B,   KC_NO, K3D, KC_NO }, \
+    { K40, K41,   K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C,   K4D, KC_NO }  \
+}
+
+#define LAYOUT_60_ansi_split_bs_rshift( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,    K1D, \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,        K2D, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, \
+    K40, K41, K42,                  K47,                   K49, K4A, K4C, K4D  \
+) { \
+    { K00, K01,   K02, K03,   K04,   K05,   K06,   K07, K08,   K09, K0A, K0B,   K0C,   K0D, K0E   }, \
+    { K10, K11,   K12, K13,   K14,   K15,   K16,   K17, K18,   K19, K1A, K1B,   K1C,   K1D, KC_NO }, \
+    { K20, K21,   K22, K23,   K24,   K25,   K26,   K27, K28,   K29, K2A, K2B,   KC_NO, K2D, KC_NO }, \
+    { K30, KC_NO, K32, K33,   K34,   K35,   K36,   K37, K38,   K39, K3A, K3B,   KC_NO, K3D, K3E   }, \
+    { K40, K41,   K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C,   K4D, KC_NO }  \
+}
+
+#define LAYOUT_60_ansi_split_rshift( \
    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0E, \
-    K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c,      \
-    K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K1d, \
-    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b,      K3d,      \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,    K1D, \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,        K2D, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, \
    K40, K41, K42,                  K47,                   K49, K4A, K4C, K4D  \
 ) { \
    { K00, K01,   K02, K03,   K04,   K05,   K06,   K07, K08,   K09, K0A, K0B,   K0C,   KC_NO, K0E   }, \
-    { K10,  K11, K12,   K13,  K14,   K15,   K16,  K17,   K18,   K19,   K1a,  K1b,  K1c,   KC_NO,   }, \
-    { K20,  K21, K22,   K23,  K24,   K25,   K26,  K27,   K28,   K29,   K2a,  K2b,  K2c,  K1d }, \
-    { K30,  K31,   K32,   K33,  K34,   K35,   K36,  K37,   K38,   K39,   K3a,  K3b,  KC_NO, K3d,   KC_NO }, \
+    { K10, K11,   K12, K13,   K14,   K15,   K16,   K17, K18,   K19, K1A, K1B,   K1C,   K1D,   KC_NO }, \
+    { K20, K21,   K22, K23,   K24,   K25,   K26,   K27, K28,   K29, K2A, K2B,   KC_NO, K2D,   KC_NO }, \
+    { K30, KC_NO, K32, K33,   K34,   K35,   K36,   K37, K38,   K39, K3A, K3B,   KC_NO, K3D,   K3E   }, \
    { K40, K41,   K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C,   K4D,   KC_NO }  \
 }

+#define LAYOUT_60_ansi_tsangan( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,    K1D, \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,        K2D, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K40, K41, K42,                  K47,                        K4A, K4C, K4D  \
+) { \
+    { K00, K01,   K02, K03,   K04,   K05,   K06,   K07, K08,   K09,   K0A, K0B,   K0C,   KC_NO, K0E   }, \
+    { K10, K11,   K12, K13,   K14,   K15,   K16,   K17, K18,   K19,   K1A, K1B,   K1C,   K1D,   KC_NO }, \
+    { K20, K21,   K22, K23,   K24,   K25,   K26,   K27, K28,   K29,   K2A, K2B,   KC_NO, K2D,   KC_NO }, \
+    { K30, KC_NO, K32, K33,   K34,   K35,   K36,   K37, K38,   K39,   K3A, K3B,   KC_NO, K3D,   KC_NO }, \
+    { K40, K41,   K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, K4A, KC_NO, K4C,   K4D,   KC_NO }  \
+}
+
+#define LAYOUT_60_hhkb( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,    K1D, \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B,        K2D, \
+    K30,      K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, \
+         K41, K42,                  K47,                        K4A, K4C       \
+) { \
+    { K00,   K01,   K02, K03,   K04,   K05,   K06,   K07, K08,   K09,   K0A, K0B,   K0C,   K0D,   K0E   }, \
+    { K10,   K11,   K12, K13,   K14,   K15,   K16,   K17, K18,   K19,   K1A, K1B,   K1C,   K1D,   KC_NO }, \
+    { K20,   K21,   K22, K23,   K24,   K25,   K26,   K27, K28,   K29,   K2A, K2B,   KC_NO, K2D,   KC_NO }, \
+    { K30,   KC_NO, K32, K33,   K34,   K35,   K36,   K37, K38,   K39,   K3A, K3B,   KC_NO, K3D,   K3E   }, \
+    { KC_NO, K41,   K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, K4A, KC_NO, K4C,   KC_NO, KC_NO }  \
+}
+
+#define LAYOUT_60_iso( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,         \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,   K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K40, K41, K42,                  K47,                   K49, K4A, K4C, K4D  \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   KC_NO, K0E   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   KC_NO, KC_NO }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   KC_NO, K3D,   KC_NO }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, KC_NO, K47,   KC_NO, K49,   K4A,   KC_NO, K4C,   K4D,   KC_NO }  \
+}
+
+#define LAYOUT_60_iso_split_bs( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,         \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,   K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K40, K41, K42,                  K47,                   K49, K4A, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03,   K04,   K05,   K06,   K07, K08,   K09, K0A, K0B,   K0C,   K0D,   K0E   }, \
+    { K10, K11, K12, K13,   K14,   K15,   K16,   K17, K18,   K19, K1A, K1B,   K1C,   KC_NO, KC_NO }, \
+    { K20, K21, K22, K23,   K24,   K25,   K26,   K27, K28,   K29, K2A, K2B,   K2C,   K2D,   KC_NO }, \
+    { K30, K31, K32, K33,   K34,   K35,   K36,   K37, K38,   K39, K3A, K3B,   KC_NO, K3D,   KC_NO }, \
+    { K40, K41, K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C,   K4D,   KC_NO }  \
+}
+
+#define LAYOUT_60_iso_split_bs_rshift( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,         \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,   K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, \
+    K40, K41, K42,                  K47,                   K49, K4A, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03,   K04,   K05,   K06,   K07, K08,   K09, K0A, K0B,   K0C,   K0D,   K0E   }, \
+    { K10, K11, K12, K13,   K14,   K15,   K16,   K17, K18,   K19, K1A, K1B,   K1C,   KC_NO, KC_NO }, \
+    { K20, K21, K22, K23,   K24,   K25,   K26,   K27, K28,   K29, K2A, K2B,   K2C,   K2D,   KC_NO }, \
+    { K30, K31, K32, K33,   K34,   K35,   K36,   K37, K38,   K39, K3A, K3B,   KC_NO, K3D,   K3E   }, \
+    { K40, K41, K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C,   K4D,   KC_NO }  \
+}
+
+#define LAYOUT_60_iso_split_rshift( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,         \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,   K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,      K3D, K3E, \
+    K40, K41, K42,                  K47,                   K49, K4A, K4C, K4D  \
+) { \
+    { K00, K01, K02, K03,   K04,   K05,   K06,   K07, K08,   K09, K0A, K0B,   K0C,   KC_NO, K0E   }, \
+    { K10, K11, K12, K13,   K14,   K15,   K16,   K17, K18,   K19, K1A, K1B,   K1C,   KC_NO, KC_NO }, \
+    { K20, K21, K22, K23,   K24,   K25,   K26,   K27, K28,   K29, K2A, K2B,   K2C,   K2D,   KC_NO }, \
+    { K30, K31, K32, K33,   K34,   K35,   K36,   K37, K38,   K39, K3A, K3B,   KC_NO, K3D,   K3E   }, \
+    { K40, K41, K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C,   K4D,   KC_NO }  \
+}
+
+#define LAYOUT_60_iso_tsangan( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C,      K0E, \
+    K10,   K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C,         \
+    K20,    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C,   K2D, \
+    K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B,           K3D, \
+    K40, K41, K42,                  K47,                        K4A, K4C, K4D  \
+) { \
+    { K00,   K01,   K02,   K03,   K04,   K05,   K06,   K07,   K08,   K09,   K0A,   K0B,   K0C,   KC_NO, K0E   }, \
+    { K10,   K11,   K12,   K13,   K14,   K15,   K16,   K17,   K18,   K19,   K1A,   K1B,   K1C,   KC_NO, KC_NO }, \
+    { K20,   K21,   K22,   K23,   K24,   K25,   K26,   K27,   K28,   K29,   K2A,   K2B,   K2C,   K2D,   KC_NO }, \
+    { K30,   K31,   K32,   K33,   K34,   K35,   K36,   K37,   K38,   K39,   K3A,   K3B,   KC_NO, K3D,   KC_NO }, \
+    { K40,   K41,   K42,   KC_NO, KC_NO, KC_NO, KC_NO, K47,   KC_NO, KC_NO, K4A,   KC_NO, K4C,   K4D,   KC_NO }  \
+}

 #define LAYOUT LAYOUT_all
@@ -21,14 +21,33 @@
 // for memcpy
 #include <string.h>

-#if !defined(DIP_SWITCH_PINS)
-#    error "No DIP switch pads defined by DIP_SWITCH_PINS"
+#if !defined(DIP_SWITCH_PINS) && !defined(DIP_SWITCH_MATRIX_GRID)
+#    error "Either DIP_SWITCH_PINS or DIP_SWITCH_MATRIX_GRID must be defined."
 #endif

-#define NUMBER_OF_DIP_SWITCHES (sizeof(dip_switch_pad) / sizeof(pin_t))
-static pin_t dip_switch_pad[]                              = DIP_SWITCH_PINS;
-static bool  dip_switch_state[NUMBER_OF_DIP_SWITCHES]      = {0};
-static bool  last_dip_switch_state[NUMBER_OF_DIP_SWITCHES] = {0};
+#if defined(DIP_SWITCH_PINS) && defined(DIP_SWITCH_MATRIX_GRID)
+#    error "Both DIP_SWITCH_PINS and DIP_SWITCH_MATRIX_GRID are defined."
+#endif
+
+#ifdef DIP_SWITCH_PINS
+#    define NUMBER_OF_DIP_SWITCHES (sizeof(dip_switch_pad) / sizeof(pin_t))
+static pin_t dip_switch_pad[] = DIP_SWITCH_PINS;
+#endif
+
+#ifdef DIP_SWITCH_MATRIX_GRID
+typedef struct matrix_index_t {
+    uint8_t row;
+    uint8_t col;
+} matrix_index_t;
+
+#    define NUMBER_OF_DIP_SWITCHES (sizeof(dip_switch_pad) / sizeof(matrix_index_t))
+static matrix_index_t dip_switch_pad[] = DIP_SWITCH_MATRIX_GRID;
+extern bool           peek_matrix(uint8_t row_index, uint8_t col_index, bool read_raw);
+static uint16_t       scan_count;
+#endif /* DIP_SWITCH_MATRIX_GRID */
+
+static bool dip_switch_state[NUMBER_OF_DIP_SWITCHES]      = {0};
+static bool last_dip_switch_state[NUMBER_OF_DIP_SWITCHES] = {0};

 __attribute__((weak)) void dip_switch_update_user(uint8_t index, bool active) {}

@@ -39,18 +58,42 @@ __attribute__((weak)) void dip_switch_update_mask_user(uint32_t state) {}
 __attribute__((weak)) void dip_switch_update_mask_kb(uint32_t state) { dip_switch_update_mask_user(state); }

 void dip_switch_init(void) {
+#ifdef DIP_SWITCH_PINS
    for (uint8_t i = 0; i < NUMBER_OF_DIP_SWITCHES; i++) {
        setPinInputHigh(dip_switch_pad[i]);
    }
    dip_switch_read(true);
+#endif
+#ifdef DIP_SWITCH_MATRIX_GRID
+    scan_count = 0;
+#endif
 }

 void dip_switch_read(bool forced) {
    bool     has_dip_state_changed = false;
    uint32_t dip_switch_mask       = 0;

+#ifdef DIP_SWITCH_MATRIX_GRID
+    bool read_raw = false;
+
+    if (scan_count < 500) {
+        scan_count++;
+        if (scan_count == 10) {
+            read_raw = true;
+            forced   = true; /* First reading of the dip switch */
+        } else {
+            return;
+        }
+    }
+#endif
+
    for (uint8_t i = 0; i < NUMBER_OF_DIP_SWITCHES; i++) {
+#ifdef DIP_SWITCH_PINS
        dip_switch_state[i] = !readPin(dip_switch_pad[i]);
+#endif
+#ifdef DIP_SWITCH_MATRIX_GRID
+        dip_switch_state[i] = peek_matrix(dip_switch_pad[i].row, dip_switch_pad[i].col, read_raw);
+#endif
        dip_switch_mask |= dip_switch_state[i] << i;
        if (last_dip_switch_state[i] != dip_switch_state[i] || forced) {
            has_dip_state_changed = true;
@@ -0,0 +1,253 @@
+/* Copyright 2020 Guillaume Gérard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* French AZERTY - AFNOR NF Z71-300
+ *
+ * A standard for the French keyboard
+ *
+ * The project was launched at the end of 2015 on the proposal of the General
+ * Delegation for the French language and the languages of France (Ministry
+ * of Culture), starting from the observation that the current "azerty"
+ * keyboards constrain the writing of French, languages regional and European
+ * languages with Latin alphabet.
+ *
+ * For the first time, a standard (NF Z71-300) defines the placement of
+ * characters on the French keyboard. It offers two layouts, one of which
+ * closely follows the QWERTY keyboard used by most people who write in French.
+ *
+ * However, it is in many ways superior to the old keyboard:
+ *
+ * - it contains all the characters required to enter text in French (for example É, œ and ")
+ * - it is designed to be more ergonomic and allow faster typing
+ * - it includes almost 60 additional characters for entering foreign languages, technical content, etc
+ * - however, the characters remain easy to locate thanks to intuitive groupings
+ *
+ * Source: https://norme-azerty.fr
+ */
+
+#pragma once
+
+#include "keymap.h"
+
+// clang-format off
+
+/*
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │ @ │ à │ é │ è │ ê │ ( │ ) │ ‘ │ ’ │ « │ » │ ' │ ^ │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │ A │ Z │ E │ R │ T │ Y │ U │ I │ O │ P │ - │ + │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │ Q │ S │ D │ F │ G │ H │ J │ K │ L │ M │ / │ * │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ < │ W │ X │ C │ V │ B │ N │ . │ , │ : │ ; │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define FR_AT   KC_GRV  // @
+#define FR_AGRV KC_1    // à
+#define FR_EACU KC_2    // é
+#define FR_EGRV KC_3    // è
+#define FR_ECIR KC_4    // ê
+#define FR_LPRN KC_5    // (
+#define FR_RPRN KC_6    // )
+#define FR_LSQU KC_7    // ‘
+#define FR_RSQU KC_8    // ’
+#define FR_LDAQ KC_9    // «
+#define FR_RDAQ KC_0    // »
+#define FR_QUOT KC_MINS // '
+#define FR_DCIR KC_EQL  // ^ (dead)
+// Row 2
+#define FR_A    KC_Q    // A
+#define FR_Z    KC_W    // Z
+#define FR_E    KC_E    // E
+#define FR_R    KC_R    // R
+#define FR_T    KC_T    // T
+#define FR_Y    KC_Y    // Y
+#define FR_U    KC_U    // U
+#define FR_I    KC_I    // I
+#define FR_O    KC_O    // O
+#define FR_P    KC_P    // P
+#define FR_MINS KC_LBRC // -
+#define FR_PLUS KC_RBRC // +
+// Row 3
+#define FR_Q    KC_A    // Q
+#define FR_S    KC_S    // S
+#define FR_D    KC_D    // D
+#define FR_F    KC_F    // F
+#define FR_G    KC_G    // G
+#define FR_H    KC_H    // H
+#define FR_J    KC_J    // J
+#define FR_K    KC_K    // K
+#define FR_L    KC_L    // L
+#define FR_M    KC_SCLN // M
+#define FR_SLSH KC_QUOT // /
+#define FR_ASTR KC_NUHS // *
+// Row 4
+#define FR_LABK KC_NUBS // <
+#define FR_W    KC_Z    // W
+#define FR_X    KC_X    // X
+#define FR_C    KC_C    // C
+#define FR_V    KC_V    // V
+#define FR_B    KC_B    // B
+#define FR_N    KC_N    // N
+#define FR_DOT  KC_M    // .
+#define FR_COMM KC_COMM // ,
+#define FR_COLN KC_DOT  // :
+#define FR_SCLN KC_SLSH // ;
+
+/* Shifted symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │ # │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ " │ ¨ │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │   │   │   │   │   │   │   │   │   │   │ – │ ± │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │   │   │   │   │   │   │   │   │   │   │ \ │ ½ │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ > │   │   │   │   │   │   │ ? │ ! │ … │ = │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define FR_HASH S(FR_AT)   // #
+#define FR_1    S(FR_AGRV) // 1
+#define FR_2    S(FR_EACU) // 2
+#define FR_3    S(FR_EGRV) // 3
+#define FR_4    S(FR_ECIR) // 4
+#define FR_5    S(FR_LPRN) // 5
+#define FR_6    S(FR_RPRN) // 6
+#define FR_7    S(FR_LSQU) // 7
+#define FR_8    S(FR_RSQU) // 8
+#define FR_9    S(FR_LDAQ) // 9
+#define FR_0    S(FR_RDAQ) // 0
+#define FR_DQUO S(FR_QUOT) // "
+#define FR_DIAE S(FR_DCIR) // ¨ (dead)
+// Row 2
+#define FR_NDSH S(FR_MINS) // –
+#define FR_PLMN S(FR_PLUS) // ±
+// Row 3
+#define FR_BSLS S(FR_SLSH) // (backslash)
+#define FR_HALF S(FR_ASTR) // ½
+// Row 4
+#define FR_RABK S(FR_LABK) // >
+#define FR_QUES S(FR_DOT)  // ?
+#define FR_EXLM S(FR_COMM) // !
+#define FR_ELLP S(FR_COLN) // …
+#define FR_EQL  S(FR_SCLN) // =
+
+/* AltGr symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │ ˘ │ § │ ´ │ ` │ & │ [ │ ] │ ¯ │ _ │ “ │ ” │ ° │ ˇ │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │ æ │ £ │ € │ ® │ { │ } │ ù │ ˙ │ œ │ % │ − │ † │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │ θ │ ß │ $ │ ¤ │ µ │ Eu│   │ ∕ │ | │ ∞ │ ÷ │ × │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ ≤ │ ʒ │ © │ ç │ ¸ │ − │ ~ │ ¿ │ ¡ │ · │ ≃ │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define FR_BREV ALGR(FR_AT)   // ˘ (dead)
+#define FR_SECT ALGR(FR_AGRV) // §
+#define FR_ACUT ALGR(FR_EACU) // ´ (dead)
+#define FR_GRV  ALGR(FR_EGRV) // ` (dead)
+#define FR_AMPR ALGR(FR_ECIR) // &
+#define FR_LBRC ALGR(FR_LPRN) // [
+#define FR_RBRC ALGR(FR_RPRN) // ]
+#define FR_MACR ALGR(FR_LSQU) // ¯ (dead)
+#define FR_UNDS ALGR(FR_RSQU) // _
+#define FR_LDQU ALGR(FR_LDAQ) // “
+#define FR_RDQU ALGR(FR_RDAQ) // ”
+#define FR_DEG  ALGR(FR_QUOT) // °
+#define FR_CARN ALGR(FR_DCIR) // ˇ (dead)
+// Row 2
+#define FR_AE   ALGR(FR_A)    // æ
+#define FR_PND  ALGR(FR_Z)    // £
+#define FR_EURO ALGR(FR_E)    // €
+#define FR_REGD ALGR(FR_R)    // ®
+#define FR_LCBR ALGR(FR_T)    // {
+#define FR_RCBR ALGR(FR_Y)    // }
+#define FR_UGRV ALGR(FR_U)    // ù
+#define FR_DOTA ALGR(FR_I)    // ˙ (dead)
+#define FR_OE   ALGR(FR_O)    // œ
+#define FR_PERC ALGR(FR_P)    // %
+#define FR_MMNS ALGR(FR_MINS) // −
+#define FR_DAGG ALGR(FR_PLUS) // †
+// Row 3
+#define FR_THET ALGR(FR_Q)    // θ
+#define FR_SS   ALGR(FR_S)    // ß
+#define FR_DLR  ALGR(FR_D)    // $
+#define FR_CURR ALGR(FR_F)    // ¤ (dead monetary key)
+#define FR_DGRK ALGR(FR_G)    // µ (dead Greek key)
+#define FR_EU   ALGR(FR_H)    // Eu (dead European symbol key)
+#define FR_DSLS ALGR(FR_K)    // ∕ (dead)
+#define FR_PIPE ALGR(FR_L)    // |
+#define FR_INFN ALGR(FR_M)    // ∞
+#define FR_DIV  ALGR(FR_SLSH) // ÷
+#define FR_MUL  ALGR(FR_ASTR) // ×
+// Row 4
+#define FR_LEQL ALGR(FR_LABK) // ≤
+#define FR_EZH  ALGR(FR_W)    // ʒ
+#define FR_COPY ALGR(FR_X)    // ©
+#define FR_CCED ALGR(FR_C)    // ç
+#define FR_CEDL ALGR(FR_V)    // ¸ (dead)
+#define FR_DMNS ALGR(FR_B)    // − (dead)
+#define FR_DTIL ALGR(FR_N)    // ~ (dead)
+#define FR_IQUE ALGR(FR_DOT)  // ¿
+#define FR_IEXL ALGR(FR_COMM) // ¡
+#define FR_MDDT ALGR(FR_COLN) // ·
+#define FR_AEQL ALGR(FR_SCLN) // ≃
+
+/* Shift+AltGr symbols
+ * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐
+ * │  ̑ │   │   │   │   │ ˝ │  ̏ │   │ — │ ‹ │ › │ ˚ │   │       │
+ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤
+ * │     │   │   │   │   │ ™ │   │   │  ̣ │   │ ‰ │ ‑ │ ‡ │     │
+ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐    │
+ * │      │   │   │   │   │   │ ˍ │   │   │   │   │ √ │ ¼ │    │
+ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴────┤
+ * │    │ ≥ │   │   │   │ ˛ │   │   │   │  ̦ │   │ ≠ │          │
+ * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤
+ * │    │    │    │                        │    │    │    │    │
+ * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘
+ */
+// Row 1
+#define FR_IBRV S(ALGR(FR_AT))   //  ̑ (dead)
+#define FR_DACU S(ALGR(FR_LPRN)) // ˝ (dead)
+#define FR_DGRV S(ALGR(FR_RPRN)) //  ̏ (dead)
+#define FR_MDSH S(ALGR(FR_RSQU)) // —
+#define FR_LSAQ S(ALGR(FR_LDAQ)) // ‹
+#define FR_RSAQ S(ALGR(FR_RDAQ)) // ›
+#define FR_RNGA S(ALGR(FR_QUOT)) // ˚ (dead)
+// Row 2
+#define FR_TM   S(ALGR(FR_T))    // ™
+#define FR_DOTB S(ALGR(FR_I))    //  ̣ (dead)
+#define FR_PERM S(ALGR(FR_P))    // ‰
+#define FR_NBHY S(ALGR(FR_MINS)) // ‑ (non-breaking hyphen)
+#define FR_DDAG S(ALGR(FR_PLUS)) // ‡
+// Row 3
+#define FR_MACB S(ALGR(FR_H))    // ˍ (dead)
+#define FR_SQRT S(ALGR(FR_SLSH)) // √
+#define FR_QRTR S(ALGR(FR_ASTR)) // ¼
+// Row 4
+#define FR_GEQL S(ALGR(FR_LABK)) // ≥
+#define FR_OGON S(ALGR(FR_V))    // ˛ (dead)
+#define FR_DCMM S(ALGR(FR_COMM)) //  ̦ (dead)
+#define FR_NEQL S(ALGR(FR_SCLN)) // ≠
@@ -59,7 +59,7 @@
 #define US_O    KC_O    // O
 #define US_P    KC_P    // P
 #define US_LBRC KC_LBRC // [
-#define US_RBRC KC_LBRC // ]
+#define US_RBRC KC_RBRC // ]
 #define US_BSLS KC_BSLS // (backslash)
 // Row 3
 #define US_A    KC_A    // A
@@ -0,0 +1,100 @@
+/* Copyright 2020 Guillaume Gérard
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+// Sendstring lookup tables for French (AZERTY - AFNOR NF Z71-300) layouts
+
+#pragma once
+
+#include "keymap_french_afnor.h"
+#include "quantum.h"
+
+// clang-format off
+
+const uint8_t ascii_to_shift_lut[16] PROGMEM = {
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+
+    KCLUT_ENTRY(0, 1, 1, 1, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 0, 0, 0, 1, 1, 1),
+    KCLUT_ENTRY(0, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 1, 1, 1, 1, 1),
+    KCLUT_ENTRY(1, 1, 1, 0, 1, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0)
+};
+
+const uint8_t ascii_to_altgr_lut[16] PROGMEM = {
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+
+    KCLUT_ENTRY(0, 0, 0, 0, 1, 1, 1, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 1, 0, 1, 0, 1),
+    KCLUT_ENTRY(1, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 0, 0, 0, 0, 0),
+    KCLUT_ENTRY(0, 0, 0, 1, 1, 1, 1, 0)
+};
+
+const uint8_t ascii_to_keycode_lut[128] PROGMEM = {
+    // NUL   SOH      STX      ETX      EOT      ENQ      ACK      BEL
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // BS    TAB      LF       VT       FF       CR       SO       SI
+    KC_BSPC, KC_TAB,  KC_ENT,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // DLE   DC1      DC2      DC3      DC4      NAK      SYN      ETB
+    XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+    // CAN   EM       SUB      ESC      FS       GS       RS       US
+    XXXXXXX, XXXXXXX, XXXXXXX, KC_ESC,  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+
+    //       !        "        #        $        %        &        '
+    KC_SPC,  FR_COMM, FR_QUOT, FR_AT,   FR_D,    FR_P,    FR_ECIR, FR_QUOT,
+    // (     )        *        +        ,        -        .        /
+    FR_LPRN, FR_RPRN, FR_ASTR, FR_PLUS, FR_COMM, FR_MINS, FR_DOT,  FR_SLSH,
+    // 0     1        2        3        4        5        6        7
+    FR_RDAQ, FR_AGRV, FR_EACU, FR_EGRV, FR_ECIR, FR_LPRN, FR_RPRN, FR_LSQU,
+    // 8     9        :        ;        <        =        >        ?
+    FR_RSQU, FR_LDAQ, FR_COLN, FR_SCLN, FR_LABK, FR_SCLN, FR_LABK, FR_DOT,
+    // @     A        B        C        D        E        F        G
+    FR_AT,   FR_A,    FR_B,    FR_C,    FR_D,    FR_E,    FR_F,    FR_G,
+    // H     I        J        K        L        M        N        O
+    FR_H,    FR_I,    FR_J,    FR_K,    FR_L,    FR_M,    FR_N,    FR_O,
+    // P     Q        R        S        T        U        V        W
+    FR_P,    FR_Q,    FR_R,    FR_S,    FR_T,    FR_U,    FR_V,    FR_W,
+    // X     Y        Z        [        \        ]        ^        _
+    FR_X,    FR_Y,    FR_Z,    FR_LPRN, FR_SLSH, FR_RPRN, FR_DCIR, FR_RSQU,
+    // `     a        b        c        d        e        f        g
+    FR_EGRV, FR_A,    FR_B,    FR_C,    FR_D,    FR_E,    FR_F,    FR_G,
+    // h     i        j        k        l        m        n        o
+    FR_H,    FR_I,    FR_J,    FR_K,    FR_L,    FR_M,    FR_N,    FR_O,
+    // p     q        r        s        t        u        v        w
+    FR_P,    FR_Q,    FR_R,    FR_S,    FR_T,    FR_U,    FR_V,    FR_W,
+    // x     y        z        {        |        }        ~        DEL
+    FR_X,    FR_Y,    FR_Z,    FR_T,    FR_L,    FR_Y,    FR_N,    KC_DEL
+};
@@ -112,3 +112,5 @@ __attribute__((weak)) uint8_t matrix_scan(void) {
    matrix_scan_quantum();
    return changed;
 }
+
+__attribute__((weak)) bool peek_matrix(uint8_t row_index, uint8_t col_index, bool raw) { return 0 != ((raw ? raw_matrix[row_index] : matrix[row_index]) & (MATRIX_ROW_SHIFTER << col_index)); }
@@ -216,11 +216,13 @@ bool process_dynamic_macro(uint16_t keycode, keyrecord_t *record) {
    } else {
        /* A macro is being recorded right now. */
        switch (keycode) {
+            case DYN_REC_START1:
+            case DYN_REC_START2:
            case DYN_REC_STOP:
                /* Stop the macro recording. */
-                if (record->event.pressed) { /* Ignore the initial release
-                                              * just after the recoding
-                                              * starts. */
+                if (record->event.pressed ^ (keycode != DYN_REC_STOP)) { /* Ignore the initial release
+                                                                          * just after the recording
+                                                                          * starts for DYN_REC_STOP. */
                    switch (macro_id) {
                        case 1:
                            dynamic_macro_record_end(macro_buffer, macro_pointer, +1, &macro_end);
@@ -5,6 +5,7 @@
 #include "timer.h"
 #include "transport.h"
 #include "quantum.h"
+#include "wait.h"

 #ifdef PROTOCOL_LUFA
 #    include <LUFA/Drivers/USB/USB.h>
@@ -82,11 +83,34 @@ static inline bool usbIsActive(void) {
 static inline bool usbIsActive(void) { return true; }
 #endif

+#ifdef SPLIT_HAND_MATRIX_GRID
+void matrix_io_delay(void);
+
+static uint8_t peek_matrix_intersection(pin_t out_pin, pin_t in_pin) {
+    setPinInputHigh(in_pin);
+    setPinOutput(out_pin);
+    writePinLow(out_pin);
+    // It's almost unnecessary, but wait until it's down to low, just in case.
+    wait_us(1);
+    uint8_t pin_state = readPin(in_pin);
+    // Set out_pin to a setting that is less susceptible to noise.
+    setPinInputHigh(out_pin);
+    matrix_io_delay(); // Wait for the pull-up to go HIGH.
+    return pin_state;
+}
+#endif
+
 __attribute__((weak)) bool is_keyboard_left(void) {
 #if defined(SPLIT_HAND_PIN)
    // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
    setPinInput(SPLIT_HAND_PIN);
    return readPin(SPLIT_HAND_PIN);
+#elif defined(SPLIT_HAND_MATRIX_GRID)
+#   ifdef SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT
+    return peek_matrix_intersection(SPLIT_HAND_MATRIX_GRID);
+#   else
+    return !peek_matrix_intersection(SPLIT_HAND_MATRIX_GRID);
+#   endif
 #elif defined(EE_HANDS)
    return eeconfig_read_handedness();
 #elif defined(MASTER_RIGHT)
@@ -364,6 +364,8 @@ void process_action(keyrecord_t *record, action_t action) {
                            dprint("MODS_TAP: Tap: unregister_code\n");
                            if (action.layer_tap.code == KC_CAPS) {
                                wait_ms(TAP_HOLD_CAPS_DELAY);
+                            } else {
+                                wait_ms(TAP_CODE_DELAY);
                            }
                            unregister_code(action.key.code);
                        } else {
@@ -25,4 +25,10 @@ ifeq ($(strip $(KEYBOARD)), projectkb/alice/rev1)
  VIA_ENABLE = yes
  LTO_ENABLE = no
  VELOCIKEY_ENABLE=yes
+endif
+ifeq ($(strip $(KEYBOARD)), projectkb/alice/rev2)
+  SRC += rgblight_layers.c
+  VIA_ENABLE = yes
+  LTO_ENABLE = no
+  VELOCIKEY_ENABLE=yes
 endif
@@ -29,7 +29,7 @@ if [ $(id -u) = 0 ]; then
 else
 	if command -v sudo > /dev/null 2>&1; then
 		sudo pkg update
-		sudp pkg install -y ${packages}
+		sudo pkg install -y ${packages}
 	else
 		echo "Make sure you run setup as root first to install base OS dependencies..."
 		echo ""
Author	SHA1	Message	Date
Oskar Holstensson	ca598c3df6	Changed US_RBRC to KC_RBRC instead of KC_LBRC (#9664 )	2020-07-08 21:45:43 +01:00
Rys Sommefeldt	4588c979bd	Reduce peak LED brightness for AoS TKL (#9667 )	2020-07-08 21:43:23 +01:00
Ramon Imbao	60ee8bddfc	Fix }] key in matrix for GHS.RAR (#9671 )	2020-07-08 20:03:02 +01:00
Guillaume Gérard	5f9fb01020	[Keymap Extra] Add French AZERTY (AFNOR - NF Z71-300) (#9644 ) Co-authored-by: Ryan <fauxpark@gmail.com>	2020-07-08 19:55:02 +01:00
ilikepi2	c4960b7579	Add VIA Functionality for Keyhive Maypad (#9654 ) Co-authored-by: Ryan <fauxpark@gmail.com>	2020-07-08 17:20:24 +01:00
James Young	d4917318cc	Add layout macros to YD60MQ (#9653 ) - LAYOUT_60_ansi_split_bs - LAYOUT_60_ansi_split_bs_rshift - LAYOUT_60_ansi_split_rshift - LAYOUT_60_ansi_tsangan - LAYOUT_60_hhkb - LAYOUT_60_iso_split_bs - LAYOUT_60_iso_split_bs_rshift - LAYOUT_60_iso_split_rshift - LAYOUT_60_iso_tsangan	2020-07-08 17:18:50 +01:00
boss566y	047a7f4e33	[Keyboard] Added Handwired Redragon Keyboard (#9590 ) * Added Handwired Redragon Keyboard as well as default and via keymaps * Update keyboards/handwired/boss566y/redragon_vara/info.json Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.h Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/rules.mk Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c Co-authored-by: Joel Challis <git@zvecr.com> * Update keyboards/handwired/boss566y/redragon_vara/info.json Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/handwired/boss566y/redragon_vara/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keymap.c Removed defined keycodes from via keymap * Update keymap.c replaced defined keycodes in default keymap * Update readme.md Changed image to one that matches the physical keyboard Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com>	2020-07-08 06:33:43 -07:00
TerryMathews	c8ab8e0bab	[Keyboard] Add support for YDKB Chili (#9583 ) * Add support for YDKB Chili Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com>	2020-07-08 06:25:30 -07:00
Matthew Tse	038a86a9b8	Add missing bracket for Tap-Hold code sample (#9675 ) The `TAPPING_TERM_PER_KEY` code sample is missing a closing bracket. This adds it.	2020-07-08 13:40:13 +10:00
QMK Bot	9ae15e8c79	format code according to conventions [skip ci]	2020-07-07 21:43:51 +00:00
Dongfeng Yu	666cb44673	Allowing Pressing the Start Buttons Again to Stop Dynamic Macro Recording (#9446 )	2020-07-07 21:59:13 +01:00
Sven Grunewaldt	03c790a0f2	Add TAP_CODE_DELAY to Mod-Tap (#9422 )	2020-07-07 21:47:59 +01:00
Ryan	29b4f83a1f	Un-nest 1up60rgb LAYOUT macros (#9648 )	2020-07-07 20:31:44 +01:00
Erovia	e6bcc232ed	Docs: update ModemManager recommendation (#9328 ) Instead of modifying the service file provided by the distro, use drop-in functionaly to explicitly specify the policy.	2020-07-07 19:22:38 +01:00
Joakim Tufvegren	5eb4675fda	Allow for building layouts from keymap.json files.	2020-07-07 07:27:39 -07:00
KgOfHedgehogs	0fcefdc013	Add jian qmk_via layout and LTO_ENABLE to all jian revs (#9606 )	2020-07-06 22:40:23 +10:00
MelGeek	fe744eb1ad	[Driver] bugfix reset the scaling register flag to FALSE (#9507 ) Co-authored-by: Ryan <fauxpark@gmail.com>	2020-07-06 22:38:41 +10:00
Brennan Vincent	85e20a5cf4	Fix typo in freebsd_install.sh (#9655 )	2020-07-06 02:20:46 +10:00
stanrc85	da5aed6bef	[Keymap] Add Alice rev2 to my userspace (#9600 )	2020-07-04 20:51:37 -07:00
Alabahuy	acb9cf12c4	[Keyboard] RART67 : add support via (#9589 )	2020-07-04 20:36:42 -07:00
siano	ade3bdf7e7	[Keyboard] XD87 Caps Lock LED refactor (#9585 )	2020-07-04 20:31:07 -07:00
paulgali	83bc0b9e80	[Keyboard] Updated VIA Support for DP60 (#9508 ) * Updated VIA Support - Added LAYOUT_all Support for VIA compatibility - Updated default dp60\layouts\via\keymap.c to mmirror changes to LAYOUT_all - Rules.mk updated in both base and via directories. Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com>	2020-07-04 19:20:22 -07:00
yanekm	29ebb99b1f	fixed link to Eclipse instructions (#9647 )	2020-07-05 08:50:01 +10:00
QMK Bot	355f075b57	format code according to conventions [skip ci]	2020-07-04 15:01:25 +00:00
Takeshi ISHII	c2ca57c8f4	add DIP_SWITCH_MATRIX_GRID support (#8772 ) * dipsw test on helix/rev2/sc/back:five_rows * add peek_matrix() to matrix_common.c * add DIP_SWITCH_MATRIX_GRID support to quantum/dip_switch.c * update docs/feature_dip_switch.md about DIP_SWITCH_MATRIX_GRID * Test end. remove test code. Revert "dipsw test on helix/rev2/sc/back:five_rows" This reverts commit 6d4304c74557597c9fb4d324f79c3ae4793ae874.	2020-07-04 23:20:49 +09:00
Takeshi ISHII	5c8b23ccff	add SPLIT_HAND_MATRIX_GRID support (#8685 ) Co-authored-by: Danny <nooges@users.noreply.github.com>	2020-07-04 15:04:47 +01:00
Sam Gowland	13a8d1681c	[Keyboard] Gowla Macro Board (#9643 ) Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Erovia <Erovia@users.noreply.github.com>	2020-07-04 11:51:42 +01:00